ETENWOLF AIR 3

Download PDF
Contents

ETENWOLF AIR 3 Portable Electric Air Pump

Instruction Manual

Model: AIR 3 | Brand: ETENWOLF

1. Introduction

Thank you for purchasing the ETENWOLF AIR 3 Portable Electric Air Pump. This compact and powerful device is designed for quick inflation and deflation of various inflatable items, and also features an integrated camp light. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Important Safety Information

  • Caution: This air pump is not suitable for inflating high-pressure items such as SUPs (Stand-Up Paddleboards), windboats, sports balls, car tires, or bicycle tires. Using it for these items may cause damage to the pump or the item.
  • Do not operate the air pump while it is charging. Disconnect the charging cable before turning on the power.
  • To power on/off, press and hold the power button for 2-3 seconds.
  • Keep out of reach of children.
  • Do not block the air intake or outlet during operation.
  • Avoid prolonged continuous operation to prevent overheating. Allow the device to cool down if it becomes warm.
  • Do not expose the device to water or extreme temperatures.

3. Package Contents

Verify that all items are present in your package:

  • ETENWOLF AIR 3 Air Pump
  • 5 x Nozzles (various sizes)
  • 1 x Charging Cable (Type-C)
  • 1 x Storage Bag
  • 1 x User Manual
ETENWOLF AIR 3 package contents including pump, nozzles, cable, bag, and manual.

Image: Contents of the ETENWOLF AIR 3 package, showing the main unit, five different nozzles, a USB-C charging cable, a storage pouch, and the instruction manual.

4. Product Overview

Familiarize yourself with the components of your ETENWOLF AIR 3.

ETENWOLF AIR 3 portable electric air pump with power and light buttons.

Image: The ETENWOLF AIR 3 main unit, showing the power button, light button, and charging port area.

  • Power Button: Press and hold for 2-3 seconds to turn on/off.
  • Light Button: Press to cycle through light modes (Soft, Reading, Outdoor) and off.
  • Inflation Port: Connect nozzle for inflation.
  • Deflation Port: Connect nozzle for deflation.
  • Type-C Charging Port: For charging the device.
  • Battery Indicator: Shows remaining battery life.

5. Setup

Before first use, ensure the device is fully charged.

  1. Charge the Device: Connect the provided Type-C charging cable to the pump and a suitable USB power adapter (not included). The battery indicator will show charging status.
  2. Select Nozzle: Choose the appropriate nozzle from the 5 included options that best fits the valve of your inflatable item.
  3. Attach Nozzle: Firmly insert the selected nozzle into either the inflation or deflation port of the air pump.

6. Operating Instructions

6.1. Inflation

  1. Ensure the correct nozzle is attached to the inflation port.
  2. Insert the nozzle securely into the valve of the item you wish to inflate.
  3. Press and hold the power button for 2-3 seconds to turn on the pump.
  4. The pump will begin inflating. Monitor the inflation process to prevent over-inflation.
  5. Once inflated to the desired firmness, press and hold the power button for 2-3 seconds to turn off the pump.
  6. Remove the nozzle from the item's valve.
ETENWOLF AIR 3 inflating and deflating an air mattress.

Image: Demonstrates the ETENWOLF AIR 3 in action, showing how to inflate an air mattress on the right and deflate it on the left.

6.2. Deflation

  1. Ensure the correct nozzle is attached to the deflation port.
  2. Insert the nozzle securely into the valve of the item you wish to deflate.
  3. Press and hold the power button for 2-3 seconds to turn on the pump.
  4. The pump will begin deflating.
  5. Once deflated, press and hold the power button for 2-3 seconds to turn off the pump.
  6. Remove the nozzle from the item's valve.

6.3. Using the Camp Light

The ETENWOLF AIR 3 features an integrated LED camp light with three brightness modes:

  • Soft Light (60 Lumens): Ideal for ambient lighting, up to 40 hours of use.
  • Reading Light (200 Lumens): Suitable for reading, up to 10 hours of use.
  • Outdoor Light (600 Lumens): Brightest setting for general outdoor illumination, up to 3 hours of use.

To operate the light:

  1. Press the light button once to turn on the Soft Light mode.
  2. Press again to switch to Reading Light mode.
  3. Press a third time to switch to Outdoor Light mode.
  4. Press a fourth time to turn off the light.
ETENWOLF AIR 3 used as a camp light inside a tent.

Image: The ETENWOLF AIR 3 hanging inside a tent, illuminating the space, demonstrating its use as a camp light.

7. Charging

The ETENWOLF AIR 3 is equipped with a 2600 mAh lithium battery and supports Type-C quick charging.

  • Connect the provided Type-C cable to the charging port on the device and to a USB power source (e.g., wall adapter, power bank, computer USB port).
  • The battery indicator lights will show the charging progress.
  • A full charge allows for inflating up to 16 sleeping pads or 4 inflatable swimming pools.
  • Do not operate the pump while it is charging.

8. Maintenance

  • Cleaning: Wipe the exterior of the pump with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the pump and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Battery Care: For optimal battery life, charge the device at least once every three months if not in regular use.

9. Troubleshooting

ProblemPossible CauseSolution
Pump does not turn on.Low battery.
Power button not held long enough.
Charge the device.
Press and hold the power button for 2-3 seconds.
Weak airflow during inflation/deflation.Incorrect nozzle size.
Air intake/outlet blocked.
Low battery.
Ensure nozzle fits snugly.
Clear any obstructions.
Charge the device.
Device overheats.Prolonged continuous use.Turn off the device and allow it to cool down before resuming use.
Light does not turn on.Low battery.
Light button not pressed correctly.
Charge the device.
Press the light button to cycle through modes.

10. Specifications

FeatureSpecification
ModelAIR 3
BrandETENWOLF
Air Pressure4.5 kPa (0.65 PSI)
Airflow360 L/min (13 CFM)
Battery Capacity2600 mAh Lithium Battery
Voltage3.7 Volts
Light Output60 / 200 / 600 Lumens
Dimensions (L x W x H)5.4 x 6.5 x 9.1 cm
MaterialPlastic
Included ComponentsAIR 3 Air Pump, 5 Nozzles, Charging Cable, Storage Bag, User Manual
Country of OriginChina

11. Warranty and Support

The ETENWOLF AIR 3 comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For warranty claims, technical support, or any questions regarding your product, please contact ETENWOLF customer service through the retailer where you purchased the product or visit the official ETENWOLF website for contact information.

Please retain your proof of purchase for warranty validation.

© 2026 ETENWOLF. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.