AVENLI Inflatable Air Bed Instruction Manual

Introduction

This manual provides essential instructions for the safe and effective use of your AVENLI Inflatable Air Bed. Please read this manual thoroughly before setup and operation, and retain it for future reference. This air bed is designed for temporary sleeping arrangements, suitable for indoor and outdoor use as a guest bed or camping mattress.

Safety Information

• Adult Supervision: Children should always be supervised when near the air bed.
• Sharp Objects: Keep the air bed away from sharp objects, heat sources, and open flames to prevent punctures and damage.
• Weight Capacity: Do not exceed the maximum weight capacity of 200 kg (440 lbs).
• Inflation: Do not over-inflate the air bed. Over-inflation can cause damage and reduce product lifespan.
• Pump Use: Use only a hand or electric pump designed for inflatable products. Do not use an air compressor. Pump is not included.
• Surface: Ensure the air bed is placed on a flat, clean, and smooth surface free of debris.
• Chemicals: Avoid contact with harsh chemicals or solvents, which can damage the PVC material.

Package Contents

• 1 x AVENLI Inflatable Air Bed (Model 24495-2450X)
• Note: Air pump is not included and must be purchased separately.

Image: The AVENLI Inflatable Air Bed packaging box, showing the product and key features.

Setup

1. Unpacking and Placement

1. Carefully remove the air bed from its packaging.
2. Unfold the air bed completely and lay it flat on a clean, level surface. Ensure there are no sharp objects underneath that could puncture the material.

2. Inflation

1. Locate the 2-in-1 inflation/deflation valve on the side of the air bed.
2. Open the outer cap of the valve.
3. Insert the nozzle of your hand or electric pump (not included) into the valve. Ensure a snug fit to prevent air leakage during inflation.
4. Begin inflating the air bed. Inflate until the bed is firm to the touch but not rigid. Avoid over-inflation.
5. Once inflated, quickly remove the pump nozzle and securely close the inner and outer valve caps to prevent air from escaping.

Image: A close-up view of the dual-function valve used for inflating and deflating the air bed.

Operating the Air Bed

Deflation and Storage

1. Ensure the air bed is clean and dry before deflation.
2. Open both the outer and inner caps of the 2-in-1 valve.
3. Allow the air to escape naturally. For faster deflation, you can gently roll the air bed from the opposite end towards the valve, or use the deflation function of an electric pump.
4. Once fully deflated, fold or roll the air bed neatly.
5. Close the valve caps securely and store the air bed in a cool, dry place, away from direct sunlight and extreme temperatures.

Maintenance

• Cleaning: To clean the air bed, wipe the surface with a damp cloth and mild soap. Do not use abrasive cleaners or harsh chemicals. Allow to air dry completely before storing.
• Repairs: In case of a small puncture, a repair patch kit (not included) can be used. Follow the instructions provided with the repair kit.
• Regular Inspection: Periodically inspect the air bed for any signs of wear, damage, or air leaks, especially around the seams and valve.

Troubleshooting

Specifications

• Model: 24495-2450X
• Dimensions (Inflated): Approximately 191 cm (L) x 137 cm (W) x 22 cm (H) / 75.2" (L) x 53.94" (W) x 8.66" (H)
• Material: Durable Polyvinyl Chloride (PVC) with flocked top surface
• Weight Capacity: 200 kg (440 lbs)
• Features: Dual Valve, Flocked Top, Inflatable, Quick Deflation, Quick Inflation
• Color: Blue

Image: A diagram illustrating the length, width, and height dimensions of the AVENLI Inflatable Air Bed.

Warranty and Support

For warranty information or product support, please refer to the contact details provided on the product packaging or visit the official AVENLI website. Keep your purchase receipt as proof of purchase.