1. Introduction
The ATOMSTACK F80 Air Assist Kit is designed to significantly improve the performance of your laser engraving and cutting machine. By providing a powerful and controlled airflow, this kit helps achieve cleaner cuts, reduce burn marks and carbonization, and increase cutting speeds. It also contributes to efficient dust removal and cooling, thereby extending the lifespan of your laser head and lens.
2. Setup
Follow these steps to set up your ATOMSTACK F80 Air Assist Kit:
- Unpack Components: Carefully remove all components from the packaging. Verify that all parts are present according to the packing list.
- Position the Unit: Place the F80 Air Assist unit on a stable surface near your laser engraving machine.
- Connect Power: Connect the independent 24V power supply to the F80 Air Assist unit. Ensure the power adapter is securely plugged into a suitable electrical outlet. The unit requires a 3A current.
- Connect Air Hose: Attach the air hose from the F80 unit to the air assist nozzle on your laser module. Ensure a tight and secure connection to prevent air leakage.
- Software Integration: For automatic control, connect the F80 Air Assist to your AtomStack laser machine and integrate it with the AtomStack software. This enables seamless control and optimization of your workflow.
3. Operating Instructions
The F80 Air Assist Kit is designed for ease of use and integration with your laser system:
- Manual Control: The F80 unit features a manual control knob to adjust the airflow intensity. Turn the knob to increase or decrease the air output as needed for your specific material and task.
- Automatic Control (Software Integration): For optimal performance and convenience, utilize the automatic control feature. When connected to AtomStack software, the air assist can be automatically turned on or off during different stages of your laser job, such as engraving or cutting. This is typically managed through specific commands or settings within the software (e.g., M7 mode in LightBurn).
- High Flow Rate: The F80 provides a powerful airflow of 60 liters per minute, capable of meeting intensive cutting demands and ensuring efficient material processing.
- Enhanced Cutting Speed: With the robust airflow, you can achieve up to 20% higher cutting speeds without compromising the quality of your work.
- Clean Edges: The continuous airflow effectively removes smoke and debris from the cutting area, preventing burn marks and carbonization, resulting in significantly smoother and cleaner edges.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your F80 Air Assist Kit:
- Regular Inspection: Periodically inspect the air hose and nozzle for any signs of wear, blockages, or damage. Ensure the connections remain secure.
- Cleaning: Keep the F80 Air Assist unit clean and free from dust and debris. Use a soft, dry cloth for cleaning the exterior. Avoid using harsh chemicals or abrasive materials.
- Dust Removal Benefits: The F80's efficient dust removal and cooling capabilities help protect your laser head and lens from accumulating debris, thereby extending their operational life and reducing the frequency of their cleaning.
5. Troubleshooting
If you encounter issues with your F80 Air Assist Kit, consider the following:
- No Airflow:
- Check if the power adapter is securely connected to the F80 unit and the electrical outlet.
- Ensure the F80 unit is powered on.
- Inspect the air hose for any kinks, blockages, or disconnections.
- Reduced Airflow:
- Verify that the air nozzle on the laser module is not obstructed by debris.
- Ensure the air hose is clear and free of internal blockages.
- If using manual control, adjust the knob to increase airflow.
- Automatic Control Not Working:
- Confirm that the F80 is correctly integrated with your laser machine and software.
- Check the software settings (e.g., M7 command in LightBurn) to ensure the air assist function is enabled for the specific operation.
- Ensure the communication cable between the F80 and the laser machine is properly connected.
6. Specifications
Detailed specifications for the ATOMSTACK F80 Air Assist Kit:
| Feature | Detail |
|---|---|
| Product Dimensions | 150 x 188 x 98 mm |
| Net Weight | 1.14 kg |
| Power Supply | Independent Power Supply |
| Input Voltage | 24 V |
| Rated Current | 3 A |
| Airflow Rate | 60 L/min |
| Material | Plastic |
| Model Number | T-F80 (or F80) |
7. Compatibility
The ATOMSTACK F80 Air Assist Kit is compatible with a wide range of ATOMSTACK laser machines:
- Compatible Models: All AtomStack frame machines with less than 70W laser power, including but not limited to: A40 Pro V2, A20 Pro V2, A10 Pro V2, A48 Ultra, A24 Ultra, A24 Pro, A12 Ultra, A12 Pro, A40 Max, A40 Pro, A30 Pro, A20 Pro.
- Incompatible Models: This accessory is not compatible with the AtomStack Hurricane 55W CO2 laser cutter.
8. Warranty and Support
For warranty details, please refer to the specific warranty information provided with your purchase or contact the retailer. For technical support, product inquiries, or further assistance, please visit the official ATOMSTACK website or contact their customer service department through the channels provided on their website or in your product documentation.
