1. Introduction
Thank you for choosing the BORUIT U8 Flat EDC Flashlight. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.
2. Product Overview
2.1 Package Contents
- 1 x BORUIT U8 Flat EDC Flashlight
- 1 x USB-C Charging Cable
- 1 x User Manual
2.2 Key Features
- Powerful Multi-Colored Lighting: Combines 3 main white LEDs with warm yellow and RGB side lights for versatile illumination.
- Ultra-Bright & Compact: Delivers up to 650 lumens with a 100-meter beam distance in a slim, 68g frame.
- Fast USB-C Rechargeable: Features a 1000mAh built-in battery, fully charged in 2 hours via USB-C, offering up to 19.2 hours runtime on low mode.
- Pocket-Sized & Hands-Free: Ultra-thin aluminum body with a strong magnetic tail and dual-direction clip for convenient carrying and use.
- Sturdy & Outdoor-Ready: Constructed from tough aluminum alloy with IP67 waterproof rating, resistant to rain and splashes.
2.3 Product Diagram
3. Setup
3.1 Charging the Flashlight
The BORUIT U8 is equipped with a built-in 1000mAh rechargeable battery and a USB-C charging port. Before first use, fully charge the device.
- Locate the USB-C charging port on the side of the flashlight.
- Connect the provided USB-C cable to the flashlight and plug the other end into a compatible USB power source (e.g., wall adapter, computer USB port).
- The power indicator light will show the charging status:
- Red light flashing: Battery level below 10%.
- Red light constant: Battery level between 10% and 30%.
- Blue light constant: Battery level above 30%.
- Blue light constant (after charging): Fully charged.
- A full charge typically takes approximately 2 hours.
4. Operating Instructions
The BORUIT U8 features dual switch controls for the main light and side lights. The flashlight has a memory function, recalling the last used mode for both main and side lights when turned on.
4.1 Main Light Operation (Front LED)
The main light provides white illumination with multiple brightness levels and special modes.
- Turn ON/OFF: Single-click the power button (⏻).
- Switch Brightness (Low-Medium-High): When the main light is ON, press and hold the power button (⏻) to cycle through Low, Medium, and High brightness levels. Release the button to select the desired level.
- Turbo Mode: Double-click the power button (⏻) from any state (ON or OFF) to activate Turbo mode (650 lumens).
- Strobe Mode: Triple-click the power button (⏻) from any state to activate Strobe mode.
- SOS Mode: From Strobe mode, press and hold the power button (⏻) to switch to SOS mode.
4.2 Side Light Operation (RGB & Yellow LEDs)
The side light offers warm yellow, white, and various RGB color modes for ambient lighting, signaling, or specific tasks.
- Turn ON/OFF: Single-click the side light button (☰).
- Switch Modes (Warm/White/RGB): When the side light is ON, double-click the side light button (☰) to cycle through Warm Light, White Light, Colored Constant Light, Colored Breathing Light, Colored Dropflow Light, and Flowing Rainbow Light.
- Switch Colors/Speed: When in a colored mode (Constant, Breathing, Dropflow, Rainbow), press and hold the side light button (☰) to cycle through different colors or adjust the speed of flowing/breathing effects.
- Red and Blue Flashing Warning Light: Triple-click the side light button (☰) from any state to activate the red and blue flashing warning light.
4.3 Magnetic Tail and Two-Way Clip
The BORUIT U8 is designed for hands-free use:
- Magnetic Tail: The strong magnetic base allows you to attach the flashlight to metal surfaces for convenient, hands-free illumination during tasks like vehicle repair or working in dark spaces.
- Two-Way Clip: The versatile clip can be attached to a pocket, backpack strap, or the brim of a cap, providing directional lighting while keeping your hands free.
4.4 Product Video
5. Maintenance
- Cleaning: Wipe the flashlight with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To maintain battery health, charge the flashlight at least once every 3-6 months if not in regular use. Avoid fully depleting the battery for extended periods.
- Water Resistance: While IP67 rated, ensure the USB-C port cover is securely closed before exposing the flashlight to water to maintain its waterproof integrity.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | Low battery or incorrect operation. | Charge the flashlight fully. Ensure you are using a single-click for ON/OFF. |
| Light output is dim. | Currently in a low brightness mode. | For main light, press and hold the power button to cycle to higher brightness levels. Double-click for Turbo mode. For side light, double-click to cycle modes and press and hold to adjust colors/speed. |
| Flashlight not charging. | Cable or power source issue. | Ensure the USB-C cable is properly connected. Try a different USB-C cable or power adapter. |
| Side light RGB colors not changing. | Incorrect operation. | After selecting a colored mode (e.g., Constant Color), press and hold the side light button to cycle through colors. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | U8-1 |
| Brightness (Max) | 650 Lumens |
| Beam Distance (Max) | 100 Meters |
| Battery Capacity | 1000mAh Lithium Ion (Built-in) |
| Charging Port | USB-C |
| Material | Aluminum Alloy |
| Water Resistance | IP67 |
| Product Dimensions | 4.72"D x 1.18"W x 0.37"H (120mm x 30mm x 9.5mm) |
| Item Weight | 3.84 ounces (68g) |
| Special Features | White, Yellow & RGB LEDs, Magnetic Tail, Dual-Direction Clip |
8. Warranty and Support
BORUIT products are manufactured to high-quality standards. For warranty information, technical support, or any inquiries regarding your BORUIT U8 Flat EDC Flashlight, please refer to the contact information provided with your purchase or visit the official BORUIT website. Please retain your proof of purchase for warranty claims.
