Tribesigns 2-Tier Round Side Table Instruction Manual

Introduction

Thank you for choosing the Tribesigns 2-Tier Round Side Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Safety Information

• Weight Limit: Do not exceed the maximum weight recommendation of 50 pounds (22.6 kg) on the tabletop or any shelf. Overloading can cause instability and damage.
• Stable Placement: Always place the table on a flat, level, and stable surface to prevent tipping.
• Children Safety: Keep children away from the assembly area. Do not allow children to climb on or play with the table.
• Liquid and Heat: Avoid placing hot items directly on the surface. Use coasters for drinks to prevent water rings and stains.
• Regular Checks: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as necessary.
• Indoor Use Only: This product is designed for indoor use. Do not expose it to outdoor elements.

Package Contents

Before assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Tabletop (1)
• Lower Shelf (1)
• Support Legs (4)
• Assembly Hardware (screws, dowels, etc.)
• Installation Tool (Screwdriver)
• Assembly Guide

Setup and Assembly

Assembly is required for this product. All necessary tools and detailed instructions are provided. It is recommended that one person assemble this table.

Assembly Steps:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches. Identify each part using the provided assembly guide.
2. Attach Support Legs to Lower Shelf: Secure the support legs to the lower shelf using the designated hardware. Ensure all connections are firm but do not overtighten.
3. Attach Tabletop: Align the tabletop with the top of the support legs. Secure the tabletop using the appropriate screws.
4. Final Tightening: Once all parts are assembled, gently tighten all screws to ensure stability. Do not overtighten to avoid damaging the engineered wood.
5. Placement: Carefully move the assembled table to its desired location.

Operating and Usage

The Tribesigns 2-Tier Round Side Table is designed for versatile use in various indoor settings.

• Multi-Functional: Use it as an end table next to a sofa, a compact nightstand beside a bed, or an accent table in a living room or balcony.
• Storage: The two-tier design provides ample space for storing books, remote controls, decorative items, or small baskets.
• Surface Use: The tabletop is suitable for holding drinks (use coasters), lamps, small plants, or electronic devices like laptops and tablets.

Maintenance

Proper care will ensure the longevity and appearance of your Tribesigns side table.

• Cleaning: Wipe the surface with a damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Stain Resistance: The table is designed to be stain-resistant. For spills, wipe immediately with a clean, dry cloth.
• Dusting: Regularly dust with a soft, dry cloth.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the wood finish.

Troubleshooting

If you encounter any issues with your side table, refer to the following common solutions:

• Wobbling Table:
  • Ensure the table is placed on a completely flat and level surface.
  • Check all assembly screws and re-tighten them if they have become loose.
• Loose Parts:
  • If any part feels loose, carefully re-tighten the corresponding screws using the provided tool.
• Scratches or Dents:
  • For minor scratches, wood repair markers or furniture polish designed for engineered wood may help.

Specifications

Warranty

This Tribesigns product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty information included with your purchase or contact Tribesigns customer support directly.

Customer Support

For any questions, assistance with assembly, missing parts, or warranty inquiries, please contact Tribesigns customer support. Refer to the contact information provided in your product packaging or visit the official Tribesigns website for support options.