SHPAVVER Head Shaver MS-672 Instruction Manual

1. Introduction

The SHPAVVER MS-672 is a versatile 5-in-1 electric head shaver designed for efficient and comfortable grooming. This device features a 7D floating rotary shaving system, IPX7 waterproofing for wet and dry use, and a convenient Type-C quick charge with an LED display. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your SHPAVVER head shaver.

2. Safety Information

Always keep the shaver away from water while charging. Be cautious when handling the detachable blades to avoid injury. Charge the shaver on a flat, dry surface and store it in a cool, dry place when not in use. Always follow the cleaning instructions to prevent bacterial growth.

3. What's Included

Your SHPAVVER MS-672 5-in-1 grooming kit includes the following components:

• Main Shaver Body: The core unit with the motor and LED display.
• 7D Floating Rotary Shaver Head: For smooth and close shaving of the head and face.
• Hair Trimmer Head: For general hair trimming.
• Nose Hair Trimmer Head: For precise trimming of nose and ear hair.
• Facial Cleansing Brush Head: For deep cleaning of the face.
• Facial Massager Head: For skin massage.
• USB Type-C Charging Cable: For recharging the device.
• Cleaning Brush: For removing hair residue from the blades.

Image: The SHPAVVER 5-in-1 Grooming Kit, illustrating the main shaver body along with its various interchangeable heads: the 7D rotary shaver, hair trimmer, nose hair trimmer, facial cleansing brush, and facial massager.

4. Setup

4.1 Initial Charging

Before first use, fully charge the shaver. Connect the USB Type-C charging cable to the shaver's port and plug the other end into a compatible USB power source (e.g., laptop, power bank, wall adapter). The LED display will show the charging progress. A full charge takes approximately 1.5 hours and provides up to 90 minutes of working time.

Image: The SHPAVVER head shaver in use, with icons indicating its suitability for various scenarios like business trips, travel, daily home use, and vehicle travel, emphasizing its 90-minute usage time after a 1.5-hour charge.

4.2 Attaching/Detaching Heads

The shaver features a unique magnetic design for easy attachment and detachment of the various heads. To attach a head, align it with the main body and it will snap into place magnetically. To detach, gently pull the head away from the body. Ensure the shaver is turned off before changing heads.

Image: A close-up view demonstrating the unique magnetic design of the SHPAVVER shaver head, showing how it easily detaches from the main body for cleaning under running water.

5. Operating Instructions

5.1 Power On/Off

Press the power button to turn the shaver on or off. The LED display will activate upon powering on, showing battery level and usage time.

5.2 Shaving Your Head/Face

Attach the 7D Floating Rotary Shaver Head. The ultra-flexible 7D pivoting blade design increases the shaving area and adapts to the contours of your head and face for a smooth and close shave. You can use the shaver for both wet and dry shaving. For wet shaving, apply shaving foam or gel. For dry shaving, ensure your skin is clean and dry.

Image: A diagram illustrating the advanced 7D floating head technology, highlighting its ability to adapt to the contours of the head for a comprehensive 360-degree shave and increased shaving area.

5.3 Wet Use (IPX7 Waterproof)

The shaver is IPX7 waterproof, allowing for safe use in the shower or with shaving foam/gel. This design enables efficient trimming even under running water.

Image: A man shaving his head in the shower, demonstrating the IPX7 waterproof capability of the SHPAVVER head shaver, with foam covering his head.

6. Maintenance & Cleaning

Regular cleaning ensures optimal performance and hygiene of your shaver.

6.1 Daily Cleaning

1. Turn off the shaver.
2. Detach the shaver head by gently pulling it off the main body.
3. Tap the head gently to dislodge any trapped hair.
4. Rinse the shaver head under running water. The IPX7 waterproof design allows for thorough rinsing.
5. Use the included cleaning brush to remove any stubborn hair particles from the blades and inside the head.
6. Allow the head to air dry completely before reattaching it to the shaver body or storing.

Image: A close-up view demonstrating the unique magnetic design of the SHPAVVER shaver head, showing how it easily detaches from the main body for cleaning under running water.

6.2 Blade Replacement

It is recommended to change the replacement head every 3 to 6 months for optimal performance and hygiene. Replacement heads can be purchased separately from SHPAVVER.

7. Troubleshooting

• Shaver not turning on: Ensure the shaver is fully charged. If the LED display shows low battery, recharge the device.
• Reduced shaving performance: Clean the shaver head thoroughly. If performance does not improve, consider replacing the shaver head.
• Irritation during shaving: Ensure the blades are clean and sharp. Try wet shaving with foam or gel for sensitive skin.
• Charging issues: Verify that the USB Type-C cable is properly connected to both the shaver and the power source. Try a different charging cable or adapter if necessary.

8. Specifications

9. Warranty & Support

The SHPAVVER Head Shaver MS-672 comes with a 12-month warranty. For any product-related inquiries or support, please contact SHPAVVER customer service. Additionally, protection plans are available for purchase:

• 2-Year Protection Plan
• 3-Year Protection Plan
• Complete Protect (monthly plan covering eligible past and future purchases)