HYTE X50 Modern Performance ATX Mid-Tower Gaming PC Case Instruction Manual

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your HYTE X50 Modern Performance ATX Mid-Tower Gaming PC Case. Please read this manual thoroughly before beginning assembly to ensure optimal performance and safety.

2. Safety Information

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the PC case.
• Handle tempered glass panels with care. Although designed to be durable, excessive force or impact can cause breakage.
• Avoid placing the PC case in areas with high humidity, extreme temperatures, or direct sunlight.
• Keep small parts and screws away from children.
• Ensure proper grounding to prevent electrical hazards.

3. Package Contents

Verify that all items listed below are present in your HYTE X50 package. If any items are missing or damaged, please contact HYTE customer support.

• HYTE X50 PC Case (Black X50 Glass model)
• Accessory Box (containing screws, zip ties, and other small parts)
• Instruction Manual (this document)

For a visual guide to the package contents, refer to the unboxing video below.

4. Product Overview

The HYTE X50 is an ATX Mid-Tower PC case designed for high airflow and modern aesthetics. It features a unique layout and premium materials to optimize cooling and showcase your components.

4.1 Key Features

• Optimized High Airflow Chassis: Designed for low-pressure, low-resistance air intake.
• Micro Mesh Panel: Enhances airflow and dust filtration.
• Tempered Acoustic Glass: 4mm thick laminated glass for sound dampening and shatter resistance.
• Top-Mounted PSU Shroud: Improves GPU airflow and simplifies cable management.
• Louvered Blade Ventilation: Patent-pending technology for efficient hot air exhaust.

4.2 Component Identification

Image: Main view of the HYTE X50 PC Case, showcasing its sleek design and tempered glass side panel.

Image: Exploded view of the HYTE X50, illustrating its modular components including mesh panels, glass panels, and internal frame.

Image: Close-up of the HYTE logo on the PC case, highlighting the brand's subtle integration into the design.

5. Setup

Follow these steps to assemble your PC components within the HYTE X50 case.

5.1 Preparing the Case

1. Place the case on a flat, stable surface.
2. Carefully remove the tempered glass side panels by unscrewing the retaining screws and gently pulling them away from the chassis.
3. Remove the top mesh panel by gently lifting it from the rear.

Image: Internal view of the HYTE X50 PC Case with panels removed, showing the motherboard tray and fan mounts.

5.2 Motherboard Installation

1. Install the I/O shield (if applicable) into the rear of the case.
2. Align your ATX or Micro ATX motherboard with the standoffs in the motherboard tray.
3. Secure the motherboard using the provided screws from the accessory box.

5.3 GPU Installation

The HYTE X50 supports vertical GPU mounting.

1. Locate the vertical GPU slot and the pre-installed PCIe 4.0 riser cable.
2. Carefully insert your graphics card into the riser cable slot.
3. Secure the graphics card to the chassis using the appropriate screws.

5.4 Power Supply Unit (PSU) Installation

1. The PSU shroud is located at the top of the case.
2. Slide your PSU into the designated top-mount area.
3. Secure the PSU with the provided screws from the rear of the case.

5.5 Cooling System Installation (Fans/AIO)

The case supports various cooling configurations:

• Bottom: Up to 3x 120mm fans for direct GPU airflow.
• Top: Radiator or fans can be mounted.
• Rear: Exhaust fan mount.

1. Install desired fans or AIO radiator(s) into the available mounting points.
2. Ensure fans are oriented correctly for optimal airflow (intake from bottom/side, exhaust from top/rear).

5.6 Cable Management

Utilize the space behind the motherboard tray and the top-mounted PSU shroud for efficient cable routing.

1. Connect all necessary power and data cables to your components.
2. Route cables through the designated cutouts and use zip ties to secure them neatly.

6. Operating Instructions

Once all components are installed and secured, reattach the side and top panels.

1. Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports.
2. Connect the power cable to the PSU and a wall outlet.
3. Press the power button on the front I/O panel to start your PC.

7. Maintenance

Regular maintenance helps ensure the longevity and performance of your PC.

• Dust Filters: The HYTE X50 features removable dust filters. Periodically remove and clean them with compressed air or water (ensure they are completely dry before reinstallation).
• Case Cleaning: Use a soft, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents.
• Internal Cleaning: Every 6-12 months, open the case and use compressed air to remove dust from fans, heatsinks, and other components.

8. Troubleshooting

If you encounter issues, refer to the following common solutions:

• PC not powering on: Check all power connections, including the PSU to the wall, PSU to motherboard, and front panel power switch header.
• No display: Ensure your monitor is connected to the graphics card (not the motherboard I/O) and that the graphics card is properly seated.
• Overheating: Verify fan orientation, ensure dust filters are clean, and check thermal paste application on CPU/GPU.
• Unusual noises: Inspect fans for obstructions or loose screws.

9. Specifications

10. Warranty and Support

The HYTE X50 PC Case comes with a 3-year protection plan. For detailed warranty information or technical support, please visit the official HYTE website or contact their customer service.

You can find additional support and product information by visiting the HYTE Store on Amazon.