Introduction
Thank you for choosing the Amseatec Criss Cross Office Chair. This chair is designed for comfort and versatility, featuring 5-level adjustable armrests, a swivel base, and a wide seat to accommodate various sitting positions, including cross-legged. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure a long-lasting and comfortable experience with your new chair.
Safety Information
- Always assemble the chair according to the provided instructions.
- Do not exceed the maximum weight capacity of 300 pounds.
- Be cautious when using the adjustable armrests and swivel feature to prevent injury.
- This chair is intended for indoor use only.
Setup and Assembly
The Amseatec Criss Cross Office Chair is designed for quick and easy assembly, typically taking less than 15 minutes for one person. All necessary parts and tools are included. Please follow the detailed instructions provided in the separate assembly guide included in your package.
General Assembly Steps:
- Unpack all components and verify against the parts list in your assembly guide.
- Attach the casters to the star base.
- Insert the gas lift cylinder into the center of the star base.
- Attach the seat plate mechanism to the underside of the seat cushion.
- Place the assembled seat onto the gas lift cylinder.
- Attach the backrest to the seat assembly.
- Secure the armrests to the chair frame.
Operating Instructions
Height Adjustment
To adjust the chair's height, locate the lever under the seat on the right side. While seated, pull the lever up to lower the chair. To raise the chair, stand up slightly and pull the lever up. Release the lever at your desired height.
5-Level Adjustable Armrests
The armrests can be adjusted to five different positions, including a flat position, to accommodate various sitting styles or to create space for pets. To adjust, press the button or lever located on the side of each armrest and move it to the desired angle. Ensure both armrests are set symmetrically for balanced support.
Swivel Function
The chair features a full 360-degree swivel function, allowing for easy movement and access to different areas of your workspace without needing to reposition the entire chair.
Tilt/Rocking Function
To activate the rocking function, pull out the lever located under the seat (usually the same lever for height adjustment). Push the lever in to lock the chair in an upright position. The resistance of the tilt can be adjusted by turning the tension knob located at the front underside of the seat mechanism.
Versatile Seating Positions
The wide seat design allows for comfortable cross-legged sitting, lounging, or traditional upright office posture. Adjust the armrests as needed to optimize your comfort for each position.
Maintenance
Cleaning
The chair is upholstered with premium PU leather, which is waterproof and wear-resistant. For general cleaning, simply wipe the surface with a clean, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the material. For spills, wipe immediately to prevent staining.
General Care
- Regularly check all bolts and screws to ensure they are tight. Retighten if necessary.
- Avoid exposing the chair to direct sunlight for prolonged periods to prevent fading and material degradation.
- Keep sharp objects away from the PU leather to prevent scratches.
Troubleshooting
Chair Does Not Tilt or Recline
If the tilt function is not working, ensure the tilt lock lever (usually the same as the height adjustment lever) is pulled out to enable rocking. Also, check the tension knob located under the seat; if it's tightened too much, it may restrict tilting. Loosen the knob by turning it counter-clockwise.
Armrests Feel Loose
If the adjustable armrests feel loose, check the screws securing them to the chair frame. Tighten any loose screws. If the issue persists, ensure the armrest adjustment mechanism is fully engaged in one of its five positions.
Lack of Back Support
While the chair is designed for comfort and versatility, individual preferences for back support vary. If you require additional lumbar support, consider using a supplementary lumbar pillow. Ensure you are sitting correctly with your back against the backrest.
Specifications
| Feature | Detail |
|---|---|
| Brand | amseatec |
| Model Name | LY-8267-GRN |
| Color | Green |
| Material | Faux Leather, High-density Supportive Foam |
| Product Dimensions (D x W x H) | 27.2"D x 32.7"W x 36.5"H |
| Item Weight | 40.8 Pounds |
| Maximum Weight Recommendation | 300 Pounds |
| Arm Style | 5-position Adjustable, Fully Wrapped Armrests |
| Furniture Base Movement | Swivel |
| Tilting | Yes |
| Recommended Uses | Gaming, Lounging, Office, Reading, Relaxing |
| Room Type | Bedroom, Dressing Room, Living Room, Office |
| Product Care Instructions | Wipe Clean |
Warranty Information
Amseatec provides a 5-year warranty on this product, ensuring quality and durability. Additionally, a 30-day return policy is available for your peace of mind. For specific terms and conditions regarding your warranty, please refer to the documentation included with your purchase or contact customer support.
Customer Support
Should you have any questions, require assistance with assembly, or need to address any issues with your Amseatec Criss Cross Office Chair, please do not hesitate to contact our customer support team.
Email: Amseatecservice@outlook.com
For Amazon purchases, you can also contact the seller directly through your Amazon account:
- Login to your Amazon Account.
- Go to 'Your Orders'.
- Find your order for the Amseatec Criss Cross Office Chair.
- Click 'Contact Seller'.