YUYIU Wireless 2.4GHz Controller (Model: B0GQZLQT44) Instruction Manual

1. Product Overview

The YUYIU Wireless 2.4GHz Controller is designed for an enhanced gaming experience across multiple platforms. It features 7-color RGB lighting, a 1000mAh rechargeable battery, dual vibration motors, Turbo function, and programmable keys. This controller connects wirelessly via a 2.4GHz adapter and is compatible with Xbox One, Xbox Series X|S, and Steam PC (Windows 10 and above).

Note: This controller requires a 2.4G receiver for wireless connection and does not support Bluetooth. It is not compatible with TV or phone devices.

2. Key Features

• 2.4GHz Wireless Connectivity: Enjoy lag-free gaming within a 33-foot range using the included wireless adapter.
• Wide Compatibility: Works with Xbox One, Xbox One S, Xbox One X, Xbox Series X, Xbox Series S consoles, and Steam PC (Windows 10 and above). Supports both wired and wireless modes.
• 7-Color RGB Lighting Modes: Customize your gaming experience with monochrome constant light, breathing mode, and circular marquee changing mode for the joysticks.
• 3.5mm Stereo Jack: Connect headphones and microphones for simultaneous audio input and output.
• 1000mAh Lithium Battery: Built-in rechargeable battery provides 10-14 hours of play time with a 2-3 hour charging time via Type-C port.
• Dual Vibration Motors: Experience realistic feedback for weapons, impacts, and vibrations, enhancing immersion.
• 360° Joystick: Omnidirectional joystick with rapid rebound and high accuracy for precise control.
• Programmable Keys: "ML" and "MR" buttons on the back can map basic function keys (A/B/X/Y/LB/RB/L3/R3/D-PAD) for 1-16 combination functions.
• AUTO TURBO Function: Set Turbo or Auto Turbo for rapid-fire actions.

3. Package Contents

The package includes:

• YUYIU Wireless 2.4GHz Controller
• 2.4GHz Wireless Adapter
• USB-C to USB-A Charging Cable
• User Manual (this document)

4. Setup and Connection

4.1 Wireless Connection (2.4GHz Adapter)

1. Insert the 2.4GHz wireless adapter into an available USB port on your Xbox console or PC (Windows 10 or above). The receiver's indicator light will flash slowly.
2. On the controller, press the Home button (the button with the house icon) to power it on. The joystick lights will illuminate.
3. Press and hold the small black button on the side of the controller (next to the charging port) until the joystick lights flash quickly.
4. Simultaneously, long press the button on the 2.4GHz receiver until its light flashes quickly.
5. Wait for a few seconds. Once connected, both the controller's Home button light and the receiver's indicator light will remain solid, and the controller will vibrate once, indicating a successful connection.

Image: The YUYIU Wireless Controller shown connected to various platforms including Xbox consoles and PC via its 2.4GHz wireless adapter, emphasizing plug-and-play functionality.

4.2 Wired Connection

To use the controller in wired mode, simply connect the USB-C to USB-A cable from the controller's Type-C port to a USB port on your Xbox console or PC. The system will automatically install necessary drivers. The controller's indicator light will remain on once connected, signifying readiness for use.

5. Operating Instructions

5.1 RGB Lighting Control

The controller features 7-color RGB lighting around the joysticks with multiple modes:

• Monochrome Constant Light Mode: Press the Light Setting Key + A button. Each subsequent press of the Light Setting Key will cycle through different colors (Blue, Ice Blue, Green, Orange, Yellow, Red, Pink).
• Breathing Mode: Press the Light Setting Key + B button. The lights will breathe and change colors in sequence (Blue, Ice Blue, Green, Orange, Yellow, Red, Pink).
• Circular Marquee Changing Mode: Press the Light Setting Key + Y button. The lights will rotate and change colors in sequence (Blue, Ice Blue, Green, Orange, Yellow, Red, Leaf Green).
• To turn off the RGB lights, press and hold the Light Setting Key for 3 seconds.

Image: Visual representation of the controller's four lighting modes, 3.5mm audio jack, and dual vibration feature.

5.2 Turbo and Auto Turbo Function

The Turbo function allows for rapid, repeated button presses with a single hold. Auto Turbo provides continuous rapid-fire without holding the button.

1. Setting Turbo: In any mode, press the desired function key (A/B/X/Y/L1/L2/R1/R2) once, then press the Turbo key. The Turbo light will flash.
2. Setting Auto Turbo: Press the same function key and Turbo key again. The Turbo light will continue to flash, indicating Auto Turbo is active.
3. Clearing Turbo/Auto Turbo: Press the function key and Turbo key a third time to clear the Turbo function for that specific button.
4. Adjusting Turbo Speed: Hold the Turbo button and press the D-pad Up/Down to adjust the speed (2 preset rates).

Image: Illustration of the Turbo and Auto Turbo functions, highlighting how they simplify rapid actions in games.

5.3 Programmable Keys (ML/MR)

The "ML" and "MR" buttons on the back of the controller can be programmed to perform single or combination functions of other basic keys (A/B/X/Y/LB/RB/L3/R3/D-PAD).

1. Entering Programming Mode: Press and hold the programming key (small button between ML and MR) for 3 seconds. The controller will vibrate once.
2. Recording Sequence: Press the button sequence you wish to record (e.g., A, B, X).
3. Confirming Assignment: Press either the ML or MR button to assign the recorded sequence. The controller will vibrate once to confirm.
4. To execute the recorded combo, simply press the assigned ML or MR button.

Image: An exploded view of the controller highlighting the programmable ML/MR buttons and other key components.

Image: Close-up of the controller's back, illustrating the programmable ML and MR buttons for custom key assignments.

5.4 Dual Vibration

The controller is equipped with dual vibration motors that provide tactile feedback for in-game actions, such as impacts, explosions, and weapon recoil. This enhances the immersive gaming experience.

Image: Depiction of the controller's dual vibration motors and their effect, emphasizing realistic feedback during gameplay.

Image: Further illustration of the vibration feature, along with a summary of wired and wireless connection options.

6. Charging the Controller

The controller has a built-in 1000mAh lithium battery. To charge:

1. Connect the provided USB-C cable to the Type-C port on the top of the controller.
2. Plug the other end (USB-A) into a USB port on your computer or console.
3. The controller's indicator light will flash slowly during charging.
4. Once fully charged, the indicator light will remain solid.

A full charge typically takes 2-3 hours and provides 10-14 hours of gameplay.

Image: Illustration of the controller's internal 1000mAh battery, Type-C charging port, and expected play/charge times.

7. Product Specifications

8. Troubleshooting

• Controller not connecting:
  • Ensure the 2.4GHz receiver is securely plugged into a USB port.
  • Verify both the controller and receiver are in pairing mode (lights flashing quickly).
  • Confirm the controller is charged.
  • For PC, ensure Windows 10 or above is used.
  • Try connecting via USB-C cable to check if the controller functions in wired mode.
• RGB lights not working:
  • Press the Light Setting Key + A/B/Y to cycle through modes.
  • Ensure the controller is powered on.
• Turbo/Programmable keys not responding:
  • Re-program the keys following the instructions in Section 5.2 and 5.3.
  • Ensure the controller is in the correct mode for programming.
• No audio from 3.5mm jack:
  • Check headphone/microphone connection.
  • Verify audio settings on your console or PC.

9. Warranty and Support

YUYIU is committed to providing high-quality products and customer service. If you encounter any issues with your controller, please contact us via email. Our customer service team will assist you as soon as possible.

For additional support or inquiries, please refer to the contact information provided with your purchase or visit the official YUYIU store page.