Standifurno H01-DR-3-6-BK-1PC

Download PDF
Contents

Standifurno Curved Dresser with 6 Drawers

Model: H01-DR-3-6-BK-1PC

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Standifurno Curved Dresser with 6 Drawers. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This dresser is designed for clothing and accessory storage in bedrooms, living rooms, nurseries, or offices.

Safety Information

To prevent tipping and ensure the safety of your family, especially children and seniors, this dresser is equipped with an anti-tilt device. It is crucial to install this device correctly. A protruding metal plate at the bottom further enhances overall stability. Always place the dresser on a flat, stable surface.

Product dimensions and anti-tipping device illustration
Figure 1: Illustration showing the overall product dimensions and the anti-tipping device mechanism. The dresser measures 47.2 inches wide, 15.4 inches deep, and 32 inches high. The anti-tipping device is designed to secure the dresser to a wall, preventing accidental falls.

Package Contents

Before assembly, verify that all components are present and undamaged. The package includes all necessary panels, hardware (screws, cam locks, dowels, drawer slides), and an assembly manual. If any parts are missing or damaged, please contact customer support.

  • Dresser panels (top, bottom, sides, back, drawer fronts, drawer sides/backs)
  • 6 Drawer slides (left and right pairs)
  • Assembly hardware (screws, cam locks, dowels, etc.)
  • Anti-tilt device components
  • Assembly manual

Setup and Assembly

Assembly typically requires two adults and a clear, spacious area. A power drill can expedite the process. Follow the detailed steps provided in the included manual. For visual guidance, please refer to the official installation videos below.

Assembly Videos

Video 1: Comprehensive installation guide for the Standifurno Curved 6-Drawer Dresser. This video demonstrates the step-by-step assembly process from unboxing to final setup.

Video 2: Detailed instructions for installing the drawer rails. This video focuses specifically on the correct method for attaching and aligning the drawer slide mechanisms.

Key Assembly Steps:

  1. Prepare the Area: Clear a large, flat, and clean workspace.
  2. Identify Parts: Unpack all components and identify them using the parts list in the manual.
  3. Assemble the Frame: Connect the side panels, bottom panel, and back panel according to the instructions.
  4. Install Drawer Slides: Attach the drawer slides to the dresser frame and the drawer boxes. Ensure they are level and aligned for smooth operation.
  5. Assemble Drawers: Construct each of the six drawers, ensuring all connections are secure.
  6. Insert Drawers: Carefully insert the assembled drawers into the dresser frame.
  7. Install Anti-Tilt Device: Securely attach the anti-tilt device to the back of the dresser and to a wall stud.
Illustration of drawer dimensions and assembly
Figure 2: Detailed view of the drawer dimensions, showing the internal space and how they fit into the dresser frame. Each drawer has a depth of 13.5 inches and a width of 22.8 inches, with a height of 5.6 inches for the top drawers and 4.3 inches for the lower drawers.

Operating Instructions

The Standifurno Curved Dresser features 6 spacious drawers designed for easy access and organization. Each drawer is equipped with smooth slide rails for effortless opening and closing. The 45° angled drawer fronts allow for comfortable opening with a simple touch, eliminating the need for external handles.

  • Opening Drawers: Gently pull the top edge of the drawer front to open.
  • Closing Drawers: Push the drawer firmly until it is fully closed and flush with the dresser frame.
  • Weight Capacity: The dresser top can hold a maximum of 130 lbs. Each drawer has a weight capacity of 30 lbs. Do not exceed these limits to ensure stability and longevity.
Features of the dresser: curved design, smooth slide rails, angled drawer fronts
Figure 3: Close-up view highlighting the unique curved design, smooth slide rails for effortless operation, and the 45° angled drawer fronts for easy opening without handles.

Maintenance

To maintain the appearance and durability of your dresser, follow these care instructions:

  • Cleaning: Wipe the surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the wood sticker finish.
  • Spills: Promptly wipe away any spills to prevent staining or water damage.
  • Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading.
  • Humidity: Maintain a stable room temperature and humidity level to prevent warping or cracking of the engineered wood.

Troubleshooting

If you encounter any issues with your dresser, refer to the following common solutions:

  • Drawers sticking or not closing smoothly: Ensure the drawer slides are properly aligned and free of obstructions. Check that all screws on the slides are tightened.
  • Dresser feels unstable: Verify that the anti-tilt device is securely installed. Ensure the dresser is on a level surface. Re-tighten all assembly hardware.
  • Missing parts: If any parts were missing upon delivery, please contact customer support for replacements.

For further assistance, please contact Standifurno customer support.

Specifications

FeatureDetail
BrandStandifurno
Model NameH01-DR-3-6-BK-1PC
Product Dimensions (D x W x H)15.4" x 47.2" x 32"
Number of Drawers6
MaterialEngineered Wood
Finish TypeWood Sticker
ColorBlack
Item Weight114.6 Pounds
Mounting TypeFreestanding
Required AssemblyYes

Warranty and Support

Standifurno is committed to providing quality products. While specific warranty details are not provided in this manual, if you encounter any problems during the installation process or with the product itself, please feel free to contact our customer support team at any time. We are here to assist you.

For support, please refer to the contact information provided at the point of purchase or on the official Standifurno website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.