Mova Z60 Ultra Roller SA Robot Vacuum and Mop Instruction Manual

1. Product Overview

The Mova Z60 Ultra Roller SA is an advanced 2-in-1 robot vacuum and mop designed for comprehensive floor cleaning. It features powerful suction, warm water mopping, and an all-in-one self-cleaning station for a hands-free experience.

2. What's in the Box

Carefully unpack all components and ensure everything is present before setup.

• Robot Vacuum (x1)
• Base Station (x1)
• Base Station Ramp Extension Plate (x1) - Install before use
• Auto Solution Dispenser (Single Compartment) (x1) - Pre-installed
• Dust Bag (x2) - 1 pre-installed
• Roller Mop (x1) - Pre-installed
• Side Brush (x1) - Pre-installed
• Wash Board (x1) - Pre-installed
• Main Brush (x1) - Pre-installed
• Dust Box (x1) - Pre-installed
• Dust Box Filter (x1) - Pre-installed
• Scale Inhibitor (x1) - Pre-installed
• Cleaning Solution (x1)
• User Manual (x1)

Image: All components included in the Mova Z60 Ultra Roller SA package.

3. Setup

1. Unpacking and Placement: Remove all packaging materials. Place the Base Station on a hard, flat surface against a wall, ensuring adequate space around it for the robot to maneuver. Install the Base Station Ramp Extension Plate if needed.
2. Power Connection: Connect the power cord to the Base Station and plug it into a power outlet.
3. Initial Charge: Place the robot vacuum onto the Base Station to charge. Ensure the charging contacts align. The robot will automatically turn on.
4. Fill Water Tanks & Solution Dispenser: Open the top cover of the Base Station. Fill the clean water tank with fresh water and the auto solution dispenser with the provided cleaning solution.
5. App Installation & Mapping: Download the MOVAhome App from your device's app store. Follow the in-app instructions to connect your robot. The app will guide you through the initial mapping process of your home.

4. Operating Instructions

4.1 Cleaning Modes

• 2-in-1 Vacuum and Mop: The Z60 Ultra Roller SA combines vacuuming and mopping simultaneously. It features a HydroForce 12-nozzle spray system and real-time fresh and dirty water separation for continuous mop cleaning.
• Vacuum Only: For dry debris collection.
• Mop Only: For wet cleaning without vacuuming.

4.2 Smart Navigation & Obstacle Avoidance

The robot utilizes FlexScope AI navigation, laser mapping, and a triple sensor system (RGB camera + dual lasers) for efficient movement and obstacle detection.

• Obstacle Avoidance: The system is designed to avoid common household obstacles such as cables, furniture, and pet waste.
• Edge Cleaning: MaxiReach technology allows the roller and side brush to extend, ensuring thorough cleaning along walls and corners.
• Carpet Detection & AutoShield: The AI-powered system automatically lifts the mop by 14 mm and activates a moisture-blocking shield when carpets are detected, preventing them from getting wet.

Image: AutoShield Tech automatically lifts the mop on carpets.

4.3 Suction Power & Mopping

• Powerful Suction: The robot features 26,000Pa suction power with a TurboForce motor for deep cleaning of various floor types.
• Warm Water Mopping: The HydroForce system uses warm water for effective stain removal.

Image: The robot vacuum's powerful 26,000Pa suction in action.

4.4 Voice Control & App Features

• Voice Control: Compatible with voice assistants for hands-free operation.
• MOVAhome App: Personalize cleaning schedules, adjust settings, and monitor cleaning progress remotely. Features include AI-PetMate mode for pet zone cleaning and interaction.

5. Maintenance

5.1 All-in-One Base Station Maintenance

The Base Station provides hands-free maintenance for the robot.

• Auto-Empty: The base automatically collects dust from the robot's dustbin into a large dust bag, requiring emptying only every 100 days (depending on usage).
• Auto Solution Refill: The base refills the robot's clean water tank and solution dispenser.
• Auto Mop Wash: Mop pads are washed using 176°F hot water to remove dirt and odors.
• Auto Mop Drying: Mop pads are dried with 145°F hot air to prevent mildew and maintain freshness.

Image: All-in-One Base Station features.

5.2 Robot Vacuum Maintenance

• Triple Anti-Tangle Mechanisms: The TroboWave™ DuoBrush, Anti-Tangle Side Brush, and Anti-Wrap Omni-Wheel are designed to prevent hair entanglement, reducing manual cleaning.
• Filter: The robot uses a HEAP filter. Regularly check and clean the filter as per the app's instructions.

6. Troubleshooting

If you encounter issues, refer to the following common solutions:

• Robot Stuck: Clear any obstacles around the robot. Check if the wheels or brushes are tangled with hair or debris.
• Cleaning Performance Issues: Ensure water tanks are filled, cleaning solution is present, and mop pads are clean. Check if the dustbin is full or the filter is clogged.
• App Connectivity Problems: Ensure your Wi-Fi network is stable and the robot is within range. Restart the app and the robot if necessary.
• Mop Error: If a mop replacement error occurs, ensure the mop pads are correctly installed and the auto-mop switching mechanism is clear of obstructions.

For persistent issues, consult the MOVAhome App for detailed diagnostics or contact customer support.

7. Specifications

8. Warranty and Support

• Warranty: Up to 36-Month Warranty.
• Money Back Service: 30-Day Money Back Service.
• Support: 24/7 Rapid Responding Service Team.

For detailed warranty information or to contact support, please refer to the official MOVA website or the MOVAhome App.