Introduction
The Bebeconfort Artemis 360 i-Size car seat is designed to provide safe and comfortable travel for children from birth up to approximately 12 years of age (40-150 cm). This car seat meets the highest i-Size safety standards (R129/04) and features advanced side impact protection. Its 360° rotation function simplifies placing and removing your child, while the integrated support leg ensures enhanced stability during installation. The adjustable headrest and multiple recline positions adapt to your child's growth and comfort needs.
This manual provides essential information for the correct installation, operation, and maintenance of your Bebeconfort Artemis 360 i-Size car seat. Please read it thoroughly before first use and keep it for future reference.
Setup and Installation
The Artemis 360 i-Size car seat offers versatile installation options to accommodate your child's age and size.
1. ISOFIX Installation with Support Leg
The car seat is equipped with ISOFIX attachment points and an integrated support leg for secure installation. Always ensure both ISOFIX connectors are correctly engaged and the support leg is firmly extended to the vehicle floor.
- Rear-Facing (40-105 cm, approx. 0-4 years): Use the 5-point harness.
- Forward-Facing (76-105 cm, approx. 15 months - 4 years): Use the 5-point harness.
Image: Close-up view of the ISOFIX connectors and the integrated support leg, showing the secure attachment points for vehicle installation.
Image: Side profile of the car seat, illustrating the fully extended support leg providing stability to the base.
2. Booster Mode (100-150 cm, approx. 4-12 years)
For older children, the car seat transitions into a high-back booster. In this mode, the child is secured using the vehicle's 3-point seat belt. The 5-point harness and infant insert should be removed.
Image: Front view of the car seat configured for older children in booster mode, highlighting the adjustable headrest.
Operating Instructions
1. 360° Rotation Function
The car seat can rotate 360 degrees on its base, allowing for easy access when placing or removing your child. This feature is particularly useful for rear-facing installation.
- To rotate, locate the rotation lever (usually at the front of the base) and pull it.
- Turn the seat to the desired position (towards the car door for loading/unloading, or to the rear/forward-facing travel position).
- Ensure the seat clicks securely into place before driving.
Image: Angled view of the car seat, illustrating the rotating base mechanism for easy child placement.
2. Recline Positions
The Artemis 360 i-Size offers 8 recline positions for optimal comfort:
- 4 recline positions for rear-facing use.
- 4 recline positions for forward-facing use.
Adjust the recline by locating the recline lever (typically under the front edge of the seat) and selecting the desired angle. Ensure the seat is securely locked in the chosen recline position.
Image: Side view demonstrating the various recline angles available for both rear and forward-facing modes.
3. Headrest and Harness Adjustment
The headrest and 5-point harness can be adjusted simultaneously with one hand to 12 different positions, ensuring a perfect fit as your child grows.
- To adjust, locate the headrest adjustment lever (usually at the top of the headrest).
- Pull the lever and slide the headrest up or down to the correct height, ensuring the shoulder straps are at or just below your child's shoulders for rear-facing, and at or just above for forward-facing.
- For newborns and smaller infants, use the integrated infant insert and cushion. Remove these as your child grows.
Image: Detailed view of the headrest adjustment mechanism, showing how to raise or lower it.
Image: Front view of the car seat configured for infants, showing the infant insert and the 5-point harness system.
Maintenance
Cleaning Instructions
To keep your car seat clean and hygienic:
- Fabric Covers: The fabric covers are removable and machine washable. Remove the covers from the car seat and wash them in a washing machine at a maximum temperature of 30°C (86°F) on a gentle cycle. Do not tumble dry, bleach, or iron.
- Plastic Parts: Wipe plastic parts with a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
- Harness: Wipe the harness straps with a damp cloth. Do not machine wash or submerge the harness straps in water, as this can weaken the material.
Always ensure all parts are completely dry before reassembling and using the car seat.
Troubleshooting
If you encounter any issues with your Bebeconfort Artemis 360 i-Size car seat, please refer to the following common solutions:
- Car Seat Not Rotating Smoothly: Ensure no fabric or debris is obstructing the rotation mechanism. Check that the seat is not under tension from the vehicle's seat belt if it's in booster mode.
- ISOFIX Indicators Not Green: Make sure the ISOFIX connectors are fully extended and pushed firmly into the vehicle's ISOFIX anchor points until both indicators turn green. Ensure the support leg is correctly extended and stable.
- Harness Too Tight/Loose: Adjust the headrest and harness simultaneously using the headrest adjustment lever. Ensure the harness is snug against your child's body, with no more than one finger's space between the harness and the child's collarbone.
- Seat Wobbles After Installation: Recheck the ISOFIX installation and support leg extension. Ensure the car seat is pressed firmly against the vehicle seat back. There should be minimal movement (less than 1 inch) at the belt path.
For persistent issues or concerns, please consult the full product manual or contact Bebeconfort customer support.
Product Specifications
| Brand | Bebeconfort |
| Model Number | 8619288210 |
| Installation Type | ISOFIX |
| Material | Polyurethane Plastic |
| Color | Black |
| Orientation | Rear-facing (40-105 cm), Forward-facing (76-150 cm) |
| Product Dimensions (DxWxH) | 51P x 44l x 78H cm (51 cm Depth x 44 cm Width x 78 cm Height) |
| Item Weight | 10.75 Kilograms |
| Maximum Recommended Weight | 36 Kilograms |
| Harness Type | 5-point (up to 105 cm), 3-point vehicle belt (100-150 cm) |
| Age Range Description | Children (General, suitable for all genders 0-12 years) |
Warranty Information
Specific warranty details for the Bebeconfort Artemis 360 i-Size car seat are typically provided with the product packaging or available on the official Bebeconfort website. Please retain your proof of purchase for any warranty claims. For detailed information regarding warranty periods and conditions, please refer to the documentation included with your product or visit the official Bebeconfort support page.
Customer Support
For further assistance, product registration, or to view frequently asked questions, please visit the official Bebeconfort website or contact their customer service department. Contact information can usually be found on the product packaging or on the brand's official website.
You can visit the Bebeconfort store on Amazon: Bebeconfort Store
