Cosmic Byte Starforge Tri-Mode Controller User Manual

Introduction

This manual provides detailed instructions for the Cosmic Byte Starforge Tri-Mode Controller. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the controller.

Image: Front view of the Cosmic Byte Starforge Tri-Mode Controller, showcasing its ergonomic design and button layout.

Key Features

Optical Triggers with Locks: Provides ultra-fast actuation with two-level trigger locks for customizable response in various game genres.
TMR Joysticks: Tunable Magnetic Resistance joysticks offer drift-free accuracy, customizable tension, and swappable modules (60gf, 70gf, 120gf, 150gf).
Impulse Triggers & HD Vibration: Dual voice coil HD vibration motors deliver immersive haptic feedback.
Tri-Mode Connectivity: Supports 2.4GHz Wireless (USB dongle), Bluetooth 5.3, and USB-C wired connections.
Back Macro Buttons: Four programmable M1-M4 rear macro buttons for advanced inputs, alongside 18 total programmable keys, turbo/auto-fire modes, and joystick/trigger calibration.
Full Customization: Allows switching ABXY layouts, adjusting vibration strength (5 levels), and fine-tuning RGB lighting effects.
Ergonomic Design: Lightweight (255g) with a textured grip for comfortable extended use.
Long Battery Life: 1200mAh battery provides 10-12 hours of playtime, with 3-4 hours USB-C charging.
6-Axis Gyroscope: Built-in motion sensing for enhanced control and precise movements.

Setup Guide

1. Charging the Controller

Before first use, fully charge the controller using the provided USB-C cable. Connect the cable to the controller's USB-C port and to a power source (e.g., PC USB port, USB wall adapter). The indicator light will show charging status and turn off when fully charged. A full charge typically takes 3-4 hours.

Controller charging with 1200mAh battery

Image: Illustration of the controller's 1200mAh battery and USB-C charging port.

2. Connecting the Controller

The Starforge controller supports three connection modes: 2.4GHz Wireless, Bluetooth 5.3, and USB-C Wired.

Controller connection mode toggle switch and compatibility

Image: Rear view of the controller showing the connection mode toggle switch, and a front view illustrating compatibility with PC, iOS, and Android.

2.1. 2.4GHz Wireless Mode (PC/Desktop)

Locate the 2.4GHz USB dongle (usually stored in the controller or packaging).
Plug the USB dongle into an available USB port on your PC.
Set the connection mode toggle switch on the back of the controller to the 2.4GHz wireless icon.
Press and hold the Home button on the controller until the indicator light flashes, then becomes solid, indicating a successful connection.

2.2. Bluetooth 5.3 Mode (PC, Android, iOS)

Set the connection mode toggle switch on the back of the controller to the Bluetooth icon.
On your device (PC, Android, iOS), enable Bluetooth and search for new devices.
Select "Cosmic Byte Starforge" from the list of available devices.
The indicator light on the controller will become solid once paired.
For iOS devices, ensure MFi (Made For iPhone/iPad) support is enabled in your device settings if required by the game.

2.3. USB-C Wired Mode (PC)

Connect the USB-C cable to the controller and the other end to your PC's USB port.
The controller will automatically switch to wired mode. No additional pairing is required.

Operating Instructions

1. TMR Replaceable Joysticks

The Starforge controller features Tunable Magnetic Resistance (TMR) joysticks with swappable modules. This allows you to customize joystick tension for different gaming preferences.

Replaceable TMR Joysticks with 60gf, 70gf, 120gf, 150gf modules

Image: Diagram showing the replaceable TMR joysticks and the four swappable modules with different resistance levels (60gf, 70gf, 120gf, 150gf).

Swapping Joystick Modules:

Gently pull the joystick cap upwards to remove it.
Carefully remove the existing joystick module.
Insert the desired new joystick module (60gf, 70gf, 120gf, or 150gf) into the slot, ensuring it is seated correctly.
Replace the joystick cap.

2. Optical Triggers with Trigger Locks

The optical triggers provide precise and rapid actuation. The trigger locks allow you to adjust the travel distance of the triggers.

Trigger locks on the back of the controller

Image: Rear view of the controller highlighting the trigger lock switches, allowing instant adjustment of trigger sensitivity.

Using Trigger Locks:

Locate the trigger lock switches on the underside of the controller.
Toggle the switch to reduce trigger travel for faster response in games like FPS.
Toggle the switch back for full trigger travel, suitable for racing games or precise control.

3. Macro Back Buttons (M1-M4)

The four programmable back buttons (M1, M2, M3, M4) allow you to assign complex button combinations or single functions for quick access.

Four macro back buttons on the controller

Image: Rear view of the controller highlighting the M1, M2, M3, and M4 macro buttons.

Programming Macro Buttons:

Refer to the official Cosmic Byte software for detailed instructions on programming these buttons. The software allows for comprehensive customization of key assignments, turbo functions, and calibration.

4. ABXY Button Switching

The controller supports switching the layout of the ABXY buttons to match different gaming conventions (e.g., Nintendo vs. Xbox layouts).

Image: Illustration showing the ABXY buttons and how their functions can be switched.

How to Switch ABXY Layout:

Consult the controller's software or specific key combination instructions for this function.

5. 6-Axis Gyroscope

The integrated 6-axis gyroscope enables motion-sensing controls in compatible games, allowing for precise aiming, steering, and other movements through tilting and rotation.

Controller with 6-axis gyroscope functionality

Image: Controller with an overlay illustrating the 6-axis gyroscope's motion-sensing capabilities.

6. RGB Lighting and Vibration Adjustment

The controller features customizable RGB lighting and adjustable vibration intensity (5 levels). These settings can typically be managed through the dedicated software.

Controller with RGB lighting and indicator light

Image: Top view of the controller highlighting the RGB lighting strips and indicator light.

Maintenance

Cleaning: Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in use for extended periods.
Joystick Modules: When swapping joystick modules, handle them carefully to avoid damage to the internal components.

Troubleshooting

Problem	Possible Cause	Solution
Controller does not power on.	Low battery or no charge.	Connect the controller to a power source using the USB-C cable and allow it to charge for at least 30 minutes before attempting to power on.
Cannot connect wirelessly (2.4GHz or Bluetooth).	Incorrect mode selected, pairing issue, or interference.	Ensure the connection mode toggle switch is set to the correct mode (2.4GHz or Bluetooth). For 2.4GHz, ensure the USB dongle is securely plugged into the device. For Bluetooth, ensure Bluetooth is enabled on your device and the controller is in pairing mode. Try restarting both the controller and the host device. Move closer to the host device to reduce interference.
Vibration not working or weak.	Vibration setting too low, game incompatibility, or hardware issue.	Check the vibration intensity settings in the controller software or game settings. Ensure the game supports vibration feedback. If the issue persists, contact customer support.
Joystick drift or inaccurate input.	Joystick calibration needed or module issue.	Perform joystick calibration using the controller's software. Ensure joystick modules are correctly seated. If using swappable modules, try a different module to see if the issue is specific to one.
Trigger input issues (e.g., constantly pressed).	Trigger lock setting or hardware issue.	Check the trigger lock switches on the underside of the controller and ensure they are in the desired position. Calibrate triggers using the controller's software. If the problem persists, contact customer support.

Specifications

Feature	Detail
Brand	Cosmic Byte
Model Name	Starforge
Compatible Devices	Android, iOS, PC, Windows
Controller Type	Gamepad
Connectivity Technology	Bluetooth 5.3, USB-C, 2.4GHz Wireless
Product Features	Ergonomic, Wireless, Optical Triggers, TMR Joysticks, Impulse Triggers, HD Vibration, Macro Buttons, 6-Axis Gyroscope, RGB Lighting
Hardware Platform	Desktop
Power Source Type	Battery Powered
Battery Capacity	1200mAh
Playtime	10-12 hours
Charging Time	3-4 hours (USB-C)
Item Weight	255g (approx. 0.5 Kilograms)
Item Dimensions (L x W x H)	15.6 x 10.5 x 6.6 Centimeters
Colour	Black

Warranty and Support

The Cosmic Byte Starforge Tri-Mode Controller comes with a 1 Year Warranty against Manufacturing Defects.

For warranty claims, technical support, or any product-related inquiries, please contact Cosmic Byte customer service. Keep your purchase invoice handy for warranty validation.

Manufacturer/Importer Contact Information:

Cosmic Byte, Prakash Warehousing, S. No.163, Hissa No 1-2-3-4-5A-5B/2/1, Phursungi, Pune 412308, Maharashtra, India.