BEPER P203TER350 Mini Ceramic Heater Fan

Introduction

Thank you for purchasing the BEPER P203TER350 Mini Ceramic Heater Fan. This compact and efficient heater is designed to provide supplemental warmth in small spaces such as bathrooms, offices, or bedrooms. Please read this manual thoroughly before use to ensure safe and optimal operation. Keep this manual for future reference.

Image: Front and side view of the BEPER P203TER350 Mini Ceramic Heater Fan, showcasing its compact design and plug orientation.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury. This appliance is for indoor use only.

• Do not cover the heater. Overheating can occur.
• Do not use in wet or damp locations, such as bathrooms near bathtubs or showers.
• Ensure the power outlet matches the voltage specified on the heater's rating label.
• Keep flammable materials at least 1 meter (3 feet) away from the heater.
• Do not insert objects into any ventilation or exhaust opening.
• Unplug the heater when not in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Product Overview

The BEPER P203TER350 features a ceramic heating element, an LED display, and a 90° rotating plug for versatile placement. It offers two power levels and a programmable timer.

Image: Diagram illustrating the BEPER P203TER350 heater's dimensions (16 cm height, 10 cm depth, 8.5 cm width) and key features including 500W/1000W power, ceramic heating, 2 power levels, fan, and 24-hour timer.

Key Components:

• LED Display: Shows temperature and timer settings.
• Control Buttons: For power, temperature adjustment (+/-), and timer.
• Ceramic Heating Element: Efficient and rapid heating.
• Air Outlet Grille: For heat distribution.
• 90° Rotating Plug: Allows for flexible positioning in various outlets.
• Power Switch: Main on/off switch.

Setup

1. Unpack: Carefully remove the heater from its packaging. Retain packaging for storage or transport.
2. Placement: Choose a stable, flat surface or a wall outlet where the heater can operate safely, away from water and flammable materials. Ensure there is adequate clearance around the heater for proper airflow.
3. Plug In: Insert the heater directly into a suitable wall power outlet. Do not use extension cords or power strips.
4. Adjust Plug Orientation: The plug can rotate 90 degrees to accommodate horizontal or vertical outlets. Gently rotate the plug to the desired position before inserting it into the wall socket.

Image: Close-up view of the BEPER P203TER350's 90-degree rotating plug, demonstrating how it can be adjusted for different outlet orientations.

Operating Instructions

1. Power On/Off

• Flip the main power switch located on the side of the unit to the 'ON' position.
• Press the power button (⏻) on the LED display panel to turn the heater on. The display will illuminate.
• To turn off, press the power button (⏻) again. The fan may continue to run briefly to cool down the heating element before shutting off completely.

2. Setting Temperature

• When the heater is on, the LED display will show the current temperature.
• Use the '+' and '-' buttons to adjust the desired temperature. The temperature range is typically between 6°C and 32°C.
• The heater will automatically cycle on and off to maintain the set temperature.

3. Power Levels

The heater offers two power levels (500W and 1000W). The specific button to switch between these modes may vary, but it is typically indicated by a fan icon or a 'MODE' button. Refer to the display for the active power level.

4. Timer Function

• Press the timer button (often indicated by a clock icon) to activate the timer function.
• Use the '+' and '-' buttons to set the desired operating duration, from 1 to 24 hours.
• The heater will automatically shut off once the set time has elapsed.

Image: The BEPER P203TER350 heater plugged into a wall outlet in a bathroom, providing warmth. Note: Ensure safe distance from water sources.

Image: The BEPER P203TER350 heater plugged into a wall outlet in a living room, demonstrating its use for personal heating.

Image: The BEPER P203TER350 heater plugged into a wall outlet in an office environment, providing localized warmth.

Maintenance

Regular cleaning helps maintain the heater's efficiency and extends its lifespan.

1. Disconnect Power: Always unplug the heater from the wall outlet and allow it to cool completely before cleaning.
2. Clean Exterior: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic.
3. Clean Air Inlet/Outlet: Use a vacuum cleaner with a brush attachment to gently remove dust and debris from the air inlet and outlet grilles. Ensure these areas are clear to prevent overheating.
4. Storage: When not in use, store the heater in a cool, dry place, preferably in its original packaging.

Troubleshooting

If you encounter issues with your BEPER P203TER350 heater, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact BEPER customer support.

Specifications

Warranty and Support

BEPER products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official BEPER website. Please have your model number (P203TER350) and purchase details ready when contacting support.