1. Overview
This manual provides instructions for the Merax Full Size Corner Bed Frame. This L-shaped daybed features integrated storage drawers, a headboard with a USB charging port, LED downlight, and a bookcase. It is designed to optimize space and functionality in various room settings.
Image 1: Merax Full Size Corner Bed Frame with storage drawers open, displaying its integrated features.
2. Safety Information
Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Exercise caution around sharp edges during assembly to prevent cuts or scrapes.
- Ensure all components are properly assembled and tightened according to the instructions to maintain stability and prevent collapse.
- Do not exceed the maximum weight capacity of 400 pounds for the bed frame.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Place the bed frame on a flat, level surface to ensure proper stability.
- Do not allow children to climb on the headboard or bookcase sections.
3. Package Contents
Verify that all parts and hardware are present before beginning assembly. If any items are missing or damaged, please contact customer support.
- Bed Frame Components (Headboard, Footboard, Side Rails, Slats)
- Storage Drawers (3 units)
- L-Shaped Bookcase Unit
- USB Charging Port and Power Outlets
- LED Downlight
- Hardware Pack (screws, bolts, nuts, etc.)
- Assembly Tools (Allen wrench, screwdriver, etc.)
- Assembly Instruction Guide
Image 2: Exploded view of the bed frame components, illustrating parts for assembly.
4. Assembly Instructions
Assembly of the Merax Full Size Corner Bed Frame requires two adults. Please follow the detailed assembly instruction guide included in your package. All necessary tools are provided.
General Steps:
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in your assembly guide to identify each piece.
- Assemble the Main Frame: Connect the headboard, footboard, and side rails using the provided hardware. Ensure all connections are secure but do not fully tighten screws until the frame is stable.
- Install Slats: Place the wooden slats across the bed frame. The slats are designed to support the mattress directly, eliminating the need for a box spring. Secure them as instructed.
- Attach Bookcase and Headboard Features: Mount the L-shaped bookcase unit to the headboard. Install the USB charging port, power outlets, and LED downlight into their designated slots. Connect any necessary wiring as per the guide.
- Assemble and Insert Drawers: Assemble the three storage drawers. Once assembled, slide them into the designated compartments beneath the bed frame.
- Final Tightening: Once the entire structure is assembled and stable, go back and fully tighten all screws and bolts.
Image 3: Detailed views of the storage drawer, bedside shelf, handle, and slat system.
Image 4: Assembly tools icon.
5. Operating Instructions
5.1 Storage Drawers
The bed frame includes three spacious storage drawers located beneath the bed. These drawers are designed for easy access and can be used to store bedding, clothing, books, or other personal items. Simply pull the handles to open and push to close.
Image 5: Demonstration of opening and closing a storage drawer.
5.2 USB Charging Port & Power Outlets
The headboard features a built-in panel with two USB charging ports and two standard three-prong power outlets. To use, ensure the bed frame's power cord is plugged into a wall outlet. You can then connect your electronic devices for charging or power.
Image 6: Close-up of the USB charging ports and power outlets on the headboard.
Image 7: Demonstration of using the USB charging port and power outlets.
5.3 LED Downlight
An LED downlight is integrated into the headboard's bookcase section. This light provides ambient illumination. Locate the switch, typically on the headboard panel, to turn the light on or off.
Image 8: Demonstration of the LED downlight functionality.
5.4 Bookcase
The L-shaped bookcase provides open compartments for displaying books, decorative items, or storing frequently used essentials within easy reach.
6. Maintenance
Regular maintenance helps prolong the life and appearance of your bed frame.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Hardware Check: Periodically check all screws, bolts, and connections to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
- Drawer Care: Ensure drawers slide smoothly. If they become stiff, check for obstructions or apply a small amount of silicone lubricant to the runners.
- Electrical Components: Keep the USB port, power outlets, and LED downlight free from dust and debris. Do not attempt to repair electrical components yourself; contact qualified personnel if issues arise.
7. Troubleshooting
If you encounter any issues with your Merax bed frame, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame feels wobbly or unstable. | Loose hardware. | Check and tighten all screws and bolts. Ensure all connections are properly seated. |
| Drawers are difficult to open or close. | Obstruction in the drawer runners; misaligned. | Remove any items obstructing the runners. Check if the drawers are properly aligned on their tracks. |
| USB port or power outlets are not working. | Bed frame not plugged in; loose connection; power outage. | Ensure the bed frame's power cord is securely plugged into a functional wall outlet. Check the connection of the power strip within the headboard. Test the wall outlet with another device. |
| LED downlight does not turn on. | Power issue; faulty switch or light. | Verify the bed frame is plugged in and receiving power. Check the light switch for proper operation. If the issue persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Merax |
| Model Number | B0FQNDC45T |
| Size | Full |
| Product Dimensions (L x W x H) | 79.1" x 63.7" x 36" |
| Material | Pine Wood + MDF |
| Color | White |
| Finish Type | Polished |
| Weight Capacity | 400 lbs |
| Item Weight | 145 lbs |
| Special Features | Bookcases, LED Downlight, Storage Drawers, USB Port |
| Assembly Required | Yes |
| Compatible Mattress Size | Full |
| UPC | 196986962781 |
Image 9: Product dimensions and weight capacity diagram.
9. Warranty and Support
Merax products are manufactured with quality and care. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official Merax website.
If you have any questions regarding assembly, missing parts, operation, or require technical assistance, please do not hesitate to contact Merax customer service. We are committed to providing prompt and helpful support.
Contact Information:
- Refer to your purchase documentation for specific contact methods.
- Visit the Merax Store on Amazon for additional information and support resources.
