iWALK 10000mAh 45W PD Portable Charger (Model UBM003) User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient use of your iWALK 10000mAh 45W PD Portable Charger, Model UBM003. Please read this manual thoroughly before use and retain it for future reference.

2. Package Contents

• iWALK 45W Power Bank (10000mAh)
• 9.84 inch Cable x 2 (one USB-C to USB-C, one USB-C to Lightning)
• User Manual

3. Product Overview

Familiarize yourself with the components of your portable charger.

Image: The iWALK 10000mAh 45W PD Portable Charger in pink, showing the integrated USB-C cable and digital display.

• Digital Display: Shows remaining battery percentage.
• Integrated USB-C Cable: For charging devices or recharging the power bank.
• Additional USB-C Port: For connecting the second detachable cable or other USB-C devices.
• Foldable Phone Stand: Located on the back for hands-free viewing.
• Power Button: To check battery level or initiate charging.

4. Setup

4.1 Initial Charging of the Power Bank

1. Connect the integrated USB-C cable or one of the provided detachable USB-C cables to the power bank's USB-C input port.
2. Connect the other end of the cable to a compatible USB wall charger (not included).
3. The digital display will show the charging progress. Charge the power bank fully before first use.

Image: Illustration demonstrating the recharging process of the power bank using a wall adapter.

5. Operating Instructions

5.1 Charging Your Devices

1. Using the Integrated Cable: Pull out the integrated USB-C cable and connect it to your device's charging port.
2. Using the Detachable Cables: Connect one of the provided 9.84-inch cables (USB-C to USB-C or USB-C to Lightning) to the power bank's additional USB-C port and then to your device.
3. The power bank will automatically begin charging. The digital display will show the power bank's remaining battery percentage.
4. To charge two devices simultaneously, use both the integrated cable and one of the detachable cables via the additional USB-C port.

Image: The iWALK power bank connected to an iPhone and an iPad, demonstrating simultaneous charging.

5.2 Using the Phone Stand

• Locate the foldable stand on the back of the power bank.
• Gently pull it out to deploy the stand.
• Place your smartphone or tablet horizontally into the stand's groove for hands-free viewing while charging.

Image: The iWALK power bank with its built-in stand extended, supporting a smartphone for viewing.

5.3 Power Bank Recharging

When the power bank's battery level is low, indicated by the digital display, recharge it using a compatible USB wall adapter as described in Section 4.1.

6. Maintenance

• Keep the power bank away from water, fire, and extreme temperatures.
• Avoid dropping or subjecting the device to strong impacts.
• Clean the device with a dry, soft cloth. Do not use corrosive cleaners.
• Store in a cool, dry place when not in use.
• For optimal battery life, fully charge the power bank at least once every three months if not used regularly.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Your iWALK 45W Power Bank (10000mAh) comes with an 18-month worry-free warranty.

For customer service and support, please refer to the contact information provided on the product packaging or visit the official iWALK website.

10. Safety Information

• Do not disassemble, modify, or repair the device.
• Do not expose to direct sunlight or high temperatures.
• Dispose of the power bank according to local regulations. Do not dispose of with household waste.
• Keep out of reach of children.

11. Product Video