1. Introduction
Thank you for choosing the TODIMART T3 Electric Scooter. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your scooter. Please read this manual thoroughly before your first ride to ensure proper use and to maximize the lifespan of your device. Keep this manual for future reference.
The TODIMART T3 Electric Scooter in use, demonstrating its sleek design and portability.
2. Safety Information
Your safety is paramount. Always wear a helmet and appropriate protective gear (knee pads, elbow pads) when riding. Adhere to all local traffic laws and regulations regarding electric scooters. Do not ride in adverse weather conditions, on slippery surfaces, or at night without proper lighting. Avoid riding under the influence of alcohol or drugs. This scooter is designed for one rider only and has a maximum load capacity of 120 kg.
- Always wear a helmet and protective gear.
- Observe local traffic laws and regulations.
- Do not ride in rain, snow, or on icy surfaces.
- Ensure proper lighting for night riding.
- Maximum load capacity: 120 kg.
- Not suitable for children under 12 years old.
3. Package Contents
Upon opening the box, please verify that all items listed below are present and in good condition:
- TODIMART T3 Electric Scooter
- Power Charger
- Assembly Tools (Allen wrench, screws)
- User Manual
If any items are missing or damaged, please contact customer support immediately.
4. Assembly and Initial Setup
The TODIMART T3 Electric Scooter comes partially assembled. Follow these steps to complete the setup:
- Unboxing: Carefully remove the scooter and all accessories from the packaging.
- Handlebar Installation: Lift the handlebar stem to an upright position. Secure the folding mechanism latch. Attach the handlebars to the stem using the provided screws and Allen wrench. Ensure they are firmly tightened.
- Kickstand Deployment: Locate the kickstand on the side of the scooter deck and deploy it to keep the scooter upright during assembly.
- Initial Charge: Before first use, fully charge the scooter's battery. Connect the charger to the charging port located on the side of the deck, then plug it into a power outlet. The indicator light on the charger will change (e.g., red to green) when fully charged.
Video demonstrating the unboxing, assembly, folding, and initial charging process of the TODIMART T3 Electric Scooter.
Connecting the charger to the TODIMART T3 Electric Scooter.
5. Product Overview
Familiarize yourself with the main components of your TODIMART T3 Electric Scooter:
- Handlebar: Features non-slip grips, accelerator, brake lever, bell, and integrated display.
- Display: Digital screen showing speed, battery level, and driving mode.
- Headlight & Taillight: Integrated LED lights for visibility and safety. The taillight also functions as a brake light.
- Motor: 350W brushless motor for efficient propulsion.
- Battery: 36V 7.8Ah lithium-ion battery housed within the deck.
- Wheels: 8.5-inch solid honeycomb tires, puncture-resistant for durability.
- Brakes: Dual braking system with electronic front brake and mechanical disc rear brake.
- Folding Mechanism: Quick-release lever for easy folding and portability.
- Deck: Anti-slip surface for rider stability.
Detailed view of the handlebar and integrated display.
The scooter's digital display and app connectivity features.
The 8.5-inch puncture-resistant honeycomb tires.
6. Operation
6.1 Power On/Off
Press and hold the power button on the display for 2-3 seconds to turn the scooter on or off.
6.2 Driving Modes
The TODIMART T3 offers three driving modes:
- ECO Mode: Energy-saving mode for extended range and lower speeds (approx. 10 km/h).
- D Mode: Standard mode for balanced speed and range (approx. 20 km/h).
- S Mode: Sport mode for maximum speed and performance (up to 25 km/h).
Press the power button briefly to cycle through the modes. The current mode will be displayed on the screen.
6.3 App Control (Bluetooth)
Connect your TODIMART T3 to the dedicated mobile app via Bluetooth for enhanced control and features:
- Download the TODIMART app from your smartphone's app store.
- Ensure Bluetooth is enabled on your smartphone and the scooter is powered on.
- Open the app and follow the on-screen instructions to pair your scooter. You may need to reset the device by pressing the reset button (if applicable) to enter pairing mode.
- Once connected, you can access features such as locking/unlocking, customizing maximum speed, activating cruise control, and viewing ride statistics.
Video demonstrating the app connection process and various riding modes of the TODIMART T3 Electric Scooter.
7. Folding and Unfolding
The TODIMART T3 is designed for easy portability with its 3-second folding mechanism:
7.1 Folding
- Ensure the scooter is powered off.
- Locate the folding lever at the base of the handlebar stem.
- Pull the lever to release the stem and carefully fold it downwards until it clicks into place, securing it to the rear fender.
7.2 Unfolding
- Release the stem from the rear fender.
- Lift the handlebar stem upwards until the folding mechanism clicks securely into its upright position. Ensure the latch is fully engaged before riding.
Illustrations of the folding process for the TODIMART T3 Electric Scooter.
8. Maintenance
Regular maintenance ensures the longevity and safe operation of your scooter:
- Cleaning: Wipe the scooter with a damp cloth after each use. Do not use high-pressure water or corrosive cleaners.
- Tires: Although puncture-resistant, regularly inspect tires for wear and tear.
- Brakes: Check brake functionality before each ride. Adjust if necessary.
- Battery Care: Charge the battery regularly, even if not in use, to maintain its health. Avoid fully discharging the battery. Store the scooter in a cool, dry place.
- Fasteners: Periodically check all screws and bolts to ensure they are tight.
9. Troubleshooting
If you encounter issues with your TODIMART T3, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not turn on | Low battery; Loose connections | Charge the battery; Check all cable connections. |
| Reduced range/speed | Low battery; Heavy load; Uphill riding; Incorrect mode | Fully charge battery; Reduce load; Select Sport mode. |
| Brakes not effective | Brake cable loose; Worn brake pads | Adjust brake cable tension; Replace brake pads if worn. |
| App connection issues | Bluetooth off; Scooter not in pairing mode; App outdated | Ensure Bluetooth is on; Restart scooter and app; Update app. |
For issues not listed here, please contact TODIMART customer support.
10. Specifications
| Feature | Detail |
|---|---|
| Brand | TODIMART |
| Model Name | T3 |
| Motor Power | 350W (Brushless) |
| Max Speed | 25 km/h |
| Battery | 36V 7.8Ah Lithium-ion (280.8Wh) |
| Max Range | 30-35 km |
| Charging Time | 3 hours |
| Max Load Capacity | 120 kg |
| Tire Size | 8.5 inches (Solid Honeycomb) |
| Braking System | Electronic front, Mechanical disc rear |
| Frame Material | Aluminum |
| Product Dimensions (L x W x H) | 108L x 43W x 114H cm |
| Folded Dimensions (L x W x H) | 108L x 43W x 49H cm |
| Item Weight | 11.8 kg (Net) / 14 kg (Gross) |
| Special Features | Digital display, Speedometer, Lightweight, Foldable, Anti-slip surface, App control, Anti-theft |
11. Warranty and Support
The TODIMART T3 Electric Scooter comes with a limited 1-year warranty. Spare parts availability is guaranteed for 3 years. For warranty claims, technical support, or any inquiries, please contact TODIMART customer service through the details provided on your purchase receipt or the official TODIMART website.