JeDEL WKL108P 3-Mode Gaming Mechanical Keyboard User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your JeDEL WKL108P 3-Mode Gaming Mechanical Keyboard. This keyboard features versatile connectivity options, an integrated LCD display, hot-swappable switches, and customizable RGB backlighting, designed for an enhanced user experience.

Image: The JeDEL WKL108P mechanical keyboard, showcasing its compact layout and RGB backlighting.

Package Contents

Verify that all items are present in the package:

• JeDEL WKL108P Keyboard
• Keycap Puller Tool
• Switch Puller Tool
• Type-C Cable
• 2.4GHz Wireless USB Receiver (typically stored in the keyboard's battery compartment or a dedicated slot)

Setup

1. Charging the Keyboard

Before first use, fully charge the keyboard. Connect the provided Type-C cable to the keyboard's Type-C port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The LCD display will indicate charging status. The keyboard features a 4000mAh battery for extended use.

Image: Illustration of the 4000mAh battery capacity, indicating smart power management.

2. Connecting the Keyboard

The JeDEL WKL108P keyboard supports three connection modes: Wired (Type-C), 2.4GHz Wireless, and Bluetooth 5.3. Use the switch on the keyboard to select the desired mode.

Image: Diagram illustrating the three connection modes: Wireless 2.4GHz, Bluetooth 3.0-5.0, and Type-C Wired.

2.1. Wired Connection (Type-C)

1. Ensure the mode switch on the keyboard is set to "Wired" or the corresponding icon.
2. Connect the Type-C cable to the keyboard's port and the other end to your computer's USB port.
3. The keyboard will be automatically recognized by your operating system.

Image: Close-up of the keyboard's Type-C port and non-slip foot mats, highlighting keyline separation.

2.2. 2.4GHz Wireless Connection

1. Locate the 2.4GHz USB receiver (dongle), typically found in a storage slot on the keyboard.
2. Plug the USB receiver into an available USB port on your computer.
3. Set the mode switch on the keyboard to "2.4G" or the corresponding icon.
4. The keyboard should connect automatically.

2.3. Bluetooth Connection

The keyboard supports connecting to up to 3 Bluetooth devices.

1. Set the mode switch on the keyboard to "BT" or the corresponding icon.
2. Press and hold Fn + 1, Fn + 2, or Fn + 3 for 3-5 seconds to enter pairing mode for the desired Bluetooth channel. The indicator light will flash rapidly.
3. On your device (computer, tablet, smartphone), enable Bluetooth and search for new devices.
4. Select "JeDEL WKL108P" (or similar name) from the list of available devices to pair.
5. Once paired, the indicator light will stop flashing and remain solid for a few seconds.
6. To switch between paired Bluetooth devices, press Fn + 1, Fn + 2, or Fn + 3 briefly.

Operating Instructions

Image: Top-down view of the JeDEL WKL108P keyboard, showing its 97-key layout with Arabic/English keycaps and RGB backlighting.

1. LCD Display and Knob Controller

The integrated LCD display provides real-time information such as connection mode, battery level, and active profile. The multi-function knob allows for quick adjustments:

• Rotate: Adjust volume (default) or backlight brightness (when in backlight mode).
• Press: Mute/unmute audio (default) or cycle through backlight effects (when in backlight mode).
• Specific functions may be customized via software (if available).

2. RGB Backlighting Control

The keyboard features customizable RGB backlighting. Use the following key combinations to control the lighting effects:

• Fn + \ |: Cycle through different backlight modes/effects.
• Fn + ↑ / ↓: Adjust backlight brightness.
• Fn + ← / →: Adjust backlight speed or direction.
• Specific color customization may be available through dedicated software.

3. Hot-Swappable Switches

The JeDEL WKL108P keyboard is designed with hot-swappable switches, allowing you to change mechanical switches without soldering. This enables customization of typing feel and sound.

1. Power off the keyboard or disconnect it from your device.
2. Use the provided keycap puller tool to carefully remove the desired keycap.
3. Use the provided switch puller tool to gently grip the switch from its top and bottom clips, then pull it straight up to remove it.
4. Align the pins of the new switch with the holes on the PCB (Printed Circuit Board). Ensure the pins are straight.
5. Gently push the new switch into place until it clicks. Do not force it.
6. Replace the keycap.

Image: Diagram illustrating the process of DIY hot-swapping mechanical switches on the keyboard.

Image: Close-up view of the keyboard's mechanical switches with keycaps removed, showing the switch housing.

4. Function Key Combinations (Fn)

The keyboard utilizes an Fn key for accessing secondary functions. Refer to the keycap legends for specific combinations. Common functions include:

• Fn + F1-F12: Multimedia controls (e.g., play/pause, volume up/down, mute).
• Fn + Win: Lock/unlock Windows key.
• Fn + Backlight Key: Adjust backlight modes/colors.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe the keyboard surface. For deeper cleaning, remove keycaps using the provided tool and use compressed air to clear debris from between switches. Avoid using liquid cleaners directly on the keyboard.
• Battery Care: To prolong battery life, avoid fully discharging the keyboard frequently. Store in a cool, dry place when not in use for extended periods.
• Storage: Store the 2.4GHz USB receiver in its designated slot on the keyboard to prevent loss.

Troubleshooting

Specifications

Image: Exploded view diagram showing the internal structure and layers of the mechanical keyboard.

Warranty and Support

This JeDEL WKL108P keyboard comes with a 14-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For technical support or warranty claims, please contact your retailer or the manufacturer's customer service with your purchase details.