Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Dapper Supply 22" Counter-Rotating Brush (CRB) Commercial Floor Cleaning Machine, Model DP-CRB1310. Please read this manual thoroughly before using the machine to ensure proper function and to prevent injury or damage.
Safety Information
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury. This machine is designed for commercial use by trained personnel.
- Read all instructions before operation.
- Ensure the power cord and plug are in good condition. Do not operate with a damaged cord or plug.
- Keep hands, feet, and loose clothing away from rotating brushes.
- Do not operate in wet conditions or near standing water unless specifically designed for such use. This machine is optimized for low-moisture cleaning.
- Disconnect power before performing any maintenance or cleaning.
- Store the machine in a dry, secure location when not in use.
Setup
1. Unpacking and Assembly
Carefully remove the machine and all components from the packaging. Inspect for any shipping damage. The machine typically arrives with the handle detached for compact shipping.
- Attach the handle assembly to the main unit using the provided fasteners. Ensure all connections are secure.
- Verify that the brushes are correctly installed. The machine includes a hard brush for hard floors.
Image: The Dapper Supply CRB machine with its handle fully assembled and ready for use.
2. Power Connection
Connect the 16 AWG 4.5 ft power cord to a standard 110V outlet. Ensure the outlet is grounded and capable of handling the machine's power requirements.
Image: The Dapper Supply CRB machine with its power cord visible, ready for connection to a 110V outlet.
Operating Instructions
1. General Operation
To start the machine, ensure it is plugged in and the power switch is in the 'ON' position. Guide the machine across the desired surface. The 19.5" extra-wide brushes rotate at 450 RPM for effective cleaning.
Video: This video demonstrates the Dapper CRB Machine in operation, showcasing its cleaning capabilities on various surfaces.
2. Carpet Cleaning (Low-Moisture Method)
For carpet cleaning, the machine is optimized for dry compound cleaning. Apply your preferred dry cleaning compound evenly over the carpet surface. The 4.3" brush diameter scrubs the cleaning powder deep into the carpet fibers, lifting out soil and debris. After cleaning, the carpet is refreshed and ready for immediate use.
Image: The Dapper Supply CRB machine actively cleaning a carpeted floor, demonstrating its effectiveness on soft surfaces.
3. Hard Floor Cleaning
The machine is versatile and effective on various hard surfaces including tile, grout, vinyl, rubber, and concrete. Ensure the appropriate brushes are installed for hard floor applications. The counter-rotating brushes provide thorough agitation to clean these surfaces.
Image: The Dapper Supply CRB machine cleaning a hard floor surface, highlighting its multi-surface versatility.
4. Edge-to-Edge Cleaning
The machine features a 22" cleaning path and can clean as close as 0.8" from walls, ensuring comprehensive coverage without missing edges. Its quiet 53 dBA operation makes it suitable for occupied facilities.
Image: A close-up view of the Dapper Supply CRB machine, illustrating its ability to clean close to edges and walls.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Dapper Supply CRB machine.
1. Brush Cleaning and Replacement
After each use, inspect the brushes for debris, hair, or tangled fibers. Remove any obstructions. Brushes can be easily detached for cleaning or replacement. Ensure brushes are dry before re-installation or storage.
Image: A detailed view of the Dapper Supply CRB machine's brushes, showing the area where debris collects and needs cleaning.
2. Machine Cleaning
Wipe down the stainless steel housing and aluminum frame with a damp cloth. Do not use abrasive cleaners or immerse the machine in water. Ensure all vents are clear of dust and debris.
3. Storage
Store the machine in a clean, dry environment. The handle can be folded for more compact storage if needed. Keep the power cord neatly wrapped to prevent damage.
Troubleshooting
If you encounter issues with your Dapper Supply CRB machine, refer to the following common solutions. For problems not listed here, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | Not plugged in; Power switch off; Circuit breaker tripped | Check power connection; Turn power switch on; Reset circuit breaker |
| Poor cleaning performance | Worn brushes; Brushes clogged with debris; Incorrect brush type for surface | Inspect and replace brushes if worn; Clean brushes thoroughly; Ensure correct brushes are installed |
| Excessive noise or vibration | Debris caught in brushes or motor; Loose components | Turn off and unplug machine, then inspect and remove debris; Check for loose fasteners |
Specifications
- Brand: Dapper Supply
- Model Number: DP-CRB1310
- Product Dimensions: 13.4"D x 22"W x 13.4"H
- Item Weight: 57 pounds
- Cleaning Path: 22 inches
- Brush Speed: 450 RPM
- Brush Diameter: 4.3 inches
- Noise Level: 53 dBA
- Power Source: Corded Electric
- Input Voltage: 110 volts
- Cord Length: 4.5 ft (16 AWG)
- Construction: Stainless Steel Housing, Aluminum Frame
- Wheels: 8" EVA wheels
- Included Components: Hard Brush for Hard Floors
- UPC: 850064526530
Warranty & Support
Your Dapper Supply CRB machine is backed by a comprehensive warranty and dedicated support.
- 2-Year Parts & Labor Warranty: Enjoy peace of mind with a 2-year warranty covering both parts and labor.
- U.S.-Based Expert Support: Access knowledgeable support from our U.S. service centers.
- Stocked Replacement Parts: Replacement parts are readily available to ensure minimal downtime.
- Nationwide Technician Network: A network of technicians is available for service needs.
2-Year Protection Plan
U.S.-Based Expert Support
Nationwide Technician Network
Replacement Parts Available
