1. Introduction
This manual provides comprehensive instructions for the safe and efficient operation of your T238 Electric BB Speed Loader PRO Edition. Please read this manual thoroughly before use to ensure optimal performance and longevity of the device. This speed loader is designed for rapid and consistent loading of airsoft BBs into various magazine types.
2. Package Contents
Verify that all items listed below are included in your package:
- T238 Electric Speed Loader PRO Edition Main Unit (x1)
- Adapter Set (Type A/B/C/D) (x1)
- 11.1V 1100mAh Lipo Battery (x1)
- Product Manual (x1)
Image: The package contents including the main loader unit, adapter set, 11.1V 1100mAh Lipo Battery, and the product manual.
3. Product Features
The T238 Electric BB Speed Loader PRO Edition incorporates advanced features for superior performance:
- High-Speed Loading: Capable of loading up to 21 BBs per second.
- Smart OLED Display: Provides real-time information on voltage, BB count, and loading speed. Includes empty loader alerts with buzzer and warning messages.
- Multiple Loading Modes: Supports both manual and fixed-count loading modes for versatile use.
- Strong Thrust Power: Delivers 23.5N thrust, ensuring smooth feeding even for high-capacity magazines like PTS EPM1 250-rd mags.
- Built-in Safety Features: Includes anti-stall protection, jam-clearing vibration, low/high voltage cutoff, overheat protection, and auto shutdown.
- Universal Compatibility: Comes with 4 adapters (Type A, B, C, D) for various airsoft magazines, including AEG, gas shotgun shells, bolt-action spring replicas, and GBB magazines.
Image: Detailed view of the loader's components and the adapter types.
4. Setup
4.1 Battery Installation
- Locate the battery compartment on the side of the loader unit.
- Carefully open the battery compartment cover.
- Connect the included 11.1V 1100mAh Lipo Battery to the internal connector. Ensure correct polarity.
- Gently place the battery inside the compartment and close the cover securely.
4.2 Loading BBs into the Loader Unit
- Open the BB loading hatch located on the top of the unit.
- Pour 6mm airsoft BBs into the compartment. The loader has an approximate capacity of 1800 BBs.
- Close the BB loading hatch securely to prevent spills.
Image: Demonstrates loading BBs into the main unit and shows the included adapters.
5. Operating Instructions
5.1 Selecting the Correct Adapter
Choose the appropriate adapter from the included set based on your magazine type:
- Type A: For most AEG magazines (e.g., AK, AR series).
- Type B: For gas shotgun shells.
- Type C: For bolt-action spring replica magazines.
- Type D: For Gas Blowback (GBB) magazines (e.g., WE/GHK/MWS/MARUI).
Attach the selected adapter to the loading port of the speed loader.
5.2 Powering On and Mode Selection
- Press the 5-way button to power on the device. The OLED display will activate.
- Use the 5-way button to navigate through the display options and select your desired loading mode:
- Preset Mode (Fixed Quantity): Allows you to set a specific number of BBs (1-99 BBs) to be loaded. The loader will stop automatically once the set count is reached. Ideal for competition ammo checks.
- Dynamic Manual Mode: Activates loading when the magazine is pressed against the port and stops when released. Ideal for speed reloads during gameplay.
5.3 Loading Magazines
- Ensure the correct adapter is attached and the loader is powered on with the desired mode selected.
- Align your airsoft magazine with the adapter on the loading port.
- Firmly press the magazine onto the adapter. The loader will begin feeding BBs.
- Monitor the OLED display for BB count and loading status.
- Once the desired amount is loaded (or the preset count is reached), remove the magazine.
Video: Demonstrates the T238 Electric BB Speed Loader PRO Edition in action, highlighting its smart features and ease of use for various magazines.
Video: Shows the versatility of the T238 Electric BB Speed Loader PRO Edition with multiple adapters for different magazine types.
Video: A quick overview of the T238 Smart Speed Loader's functions and operation.
6. Maintenance
- Keep the loader clean and free from dirt, dust, and debris.
- Regularly inspect the loading mechanism for any obstructions.
- Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
- Ensure the battery is fully charged before extended storage and periodically recharge it to maintain battery health.
7. Troubleshooting
If you encounter issues with your T238 Electric BB Speed Loader PRO Edition, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| BBs not feeding or jamming | Incorrect adapter, low battery, BBs stuck, foreign object. | Ensure correct adapter is used. Charge the battery. The anti-stall and jam-clearing vibration features should help. If not, clear any visible obstructions. |
| OLED display not working | Low battery, device not powered on. | Charge the battery. Press the 5-way button to power on. |
| Loader stops unexpectedly | Low/high voltage cutoff, overheat protection activated, gear stall. | Check battery voltage. Allow the unit to cool down if it feels warm. The device has auto-reverse to clear stalls. |
If problems persist, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Dimensions | 95 x 95 x 147 mm |
| Weight | 670g |
| Materials | PC/ABS/POM/Aluminum |
| Loading Rate | 21 BBs/sec @12.6V |
| Operating Temperature | -20°C ~ 45°C |
| Capacity | Approx. 1800 (6mm BB) |
| Loading Thrust | Approx. 23.5N |
| Battery | T-shaped plug, max supported size 122x19x16mm (11.1V 1100mAh Lipo Battery included) |
| Power Consumption | Max. 30W |
Image: Overview of the technical specifications of the speed loader.
9. Safety Information
WARNING: Failure to follow these safety guidelines may result in injury or damage to the device.
- Never insert fingers, hair, or clothing into the loading nozzle while the device is running.
- Do not modify motor voltage; this may cause gearbox damage.
- Unauthorized disassembly is strictly prohibited and may cause irreversible damage.
- For 6mm plastic BBs ONLY. Do not load projectiles of other diameters or metal ammunition.
- Children under 14 must use under adult supervision.
Image: Important safety warnings and prohibited actions for the speed loader.
10. Warranty and Support
The T238 Electric BB Speed Loader PRO Edition comes with a 6-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
