Introduction
Thank you for purchasing the EUHOMY HZB-10M Ice Maker. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and keep it for future reference.
This ice maker produces clear, crescent-shaped ice cubes with adjustable thickness, features a timer function, automatic cleaning, and operates quietly, making it ideal for home use.
Safety Instructions
- Ensure the appliance is placed on a stable, level surface away from direct sunlight and heat sources.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Use only potable water in the water tank.
- Keep children away from the appliance during operation.
- Unplug the ice maker before cleaning or when not in use for extended periods.
- Do not operate the appliance with a damaged cord or plug. Contact customer support for repairs.
- Do not block ventilation openings.
- This appliance is for household use only.
Product Overview
Familiarize yourself with the components of your EUHOMY HZB-10M Ice Maker.
Image: Front view of the EUHOMY HZB-10M Ice Maker, showing the control panel and ice viewing window.
Components:
- Control Panel: Located on the top front, with LED indicators and buttons.
- Water Tank: 1.8L capacity, located inside the unit.
- Ice Basket: Removable basket for collecting ice, with 1.1kg capacity.
- Ice Scoop: Included for convenient ice retrieval.
- Transparent Window: Allows monitoring of ice production.
- Drain Plug: Located at the bottom for easy water drainage.
Control Panel and Indicators:
Image: Close-up of the LED indicator panel, showing various status lights.
- Blue Light: Indicates ice making is in progress.
- Purple Light: Indicates the ice basket is full.
- Orange Light: Indicates low water level, requiring refill.
- Power Button: To turn the unit on/off.
- "+" / "-" Buttons: To adjust ice thickness and set timer.
Setup
- Unpacking: Carefully remove the ice maker from its packaging. Remove all packing materials and ensure no parts are missing.
- Initial Cleaning: Before first use, clean the interior of the ice maker. Refer to the "Maintenance" section for detailed cleaning instructions.
- Placement: Place the ice maker on a flat, stable surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides).
- Water Filling:
Image: Illustration showing two ways to fill the water tank: pouring directly into the small opening or removing the lid for easier access.
Open the water tank lid and fill with potable water up to the MAX fill line. Do not overfill. You can also pour water through the small opening.
- Power Connection: Plug the power cord into a grounded electrical outlet.
Operating Instructions
Starting Ice Production:
- Press the Power button to turn on the ice maker. The blue LED indicator will light up, signifying that ice production has started.
- The first batch of ice may take slightly longer to produce and might be smaller. Discard the first few batches of ice.
- The ice maker can produce 16 ice cubes in approximately 12 minutes.
Image: Graphic illustrating the high-efficiency ice production, showing 16 ice cubes in 12 minutes.
Adjusting Ice Thickness:
The ice maker allows you to adjust the thickness of the ice cubes to your preference.
Image: Visual representation of three ice thickness options: 6.5mm, 10mm, and 14mm.
- Press the "+" or "-" buttons to cycle through the available ice thickness settings (6.5mm, 10mm, 14mm).
- Thinner ice cools faster, while thicker ice melts slower, maintaining drink temperature longer.
Using the Timer Function:
The ice maker features a convenient timer function to schedule ice production.
Image: Diagram showing how to set the timer for delayed ice production, for example, setting it at 10 PM to have ice ready by 8 AM.
- While the unit is on standby, press and hold the "-" button for 3 seconds to activate the timer setting.
- Use the "+" or "-" buttons to set the desired delay time, up to 24 hours.
- The ice maker will automatically start producing ice after the set delay.
Monitoring Ice Production:
- The transparent window allows you to visually check the ice level without opening the lid.
- The purple LED indicator will light up when the ice basket is full, and the machine will pause production.
- The orange LED indicator will light up when the water level is low, and the machine will pause production until water is refilled.
Maintenance
Automatic Cleaning Function:
The ice maker is equipped with a one-touch automatic cleaning function for convenience and hygiene.
Image: Diagram illustrating the internal water circulation during the 20-minute automatic deep cleaning cycle.
- Ensure the water tank is filled with clean water.
- Press the dedicated cleaning button (refer to your control panel for the specific icon, often a water drop or brush symbol) to start the 20-minute automatic cleaning cycle.
- After the cycle, drain the water as described below.
Draining Water:
Regularly drain the water from the unit to maintain hygiene and prevent mineral buildup.
Image: Close-up view of the drain plug at the bottom of the ice maker, showing water being released.
- Unplug the ice maker from the power outlet.
- Locate the drain plug at the bottom of the unit.
- Place a container under the drain plug and remove the plug to allow water to drain completely.
- Once drained, securely replace the drain plug.
General Cleaning:
- Wipe the exterior with a soft, damp cloth.
- Clean the ice basket and ice scoop with mild detergent and rinse thoroughly.
- For internal cleaning, use a solution of water and vinegar or a mild descaling agent, run the automatic cleaning cycle, and then drain and rinse several times with clean water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not turning on. | No power, loose plug. | Check power connection, ensure outlet is functional. |
| Orange LED (Low Water) is on. | Water tank is empty or below minimum level. | Refill the water tank with potable water. |
| Purple LED (Ice Full) is on. | Ice basket is full. | Remove ice from the basket. The machine will resume production. |
| No ice production or small ice cubes. | Insufficient water, ambient temperature too high, ventilation blocked. | Check water level, ensure proper ventilation, operate in a cooler environment. |
| Ice has an unusual taste or odor. | Stale water, dirty water tank. | Drain old water, clean the water tank and internal components thoroughly, use fresh potable water. |
Specifications
- Model: HZB-10M
- Brand: EUHOMY
- Product Dimensions: 35.8 x 24 x 40 cm (Length x Width x Height)
- Product Weight: 11.4 Kilograms
- Water Tank Capacity: 1.8 Liters
- Ice Basket Capacity: 1.1 kg (approx. 160 ice cubes)
- Ice Production Speed: 16 cubes in approximately 12 minutes
- Ice Thickness Settings: 6.5mm, 10mm, 14mm
- Noise Level: Below 42dB
- Refrigerant: R290 (environmentally friendly)
- Power Consumption: Approximately 120W
- Included Accessories: Ice maker, ice basket, ice scoop, user manual.
Warranty and Support
One-Year Quality Guarantee:
Image: Graphic displaying "ONE YEAR GUARANTEE" and PSE certification for product safety.
EUHOMY products undergo strict quality inspection before shipment. We offer a one-year quality guarantee from the date of purchase. This ensures peace of mind for our customers.
The product is also PSE certified, complying with technical standards to prevent hazards and failures related to electrical products.
Customer Support:
Image: Image showing customer support representatives and contact details.
Should you encounter any issues or have questions regarding your EUHOMY ice maker, please do not hesitate to contact our customer support team. We are committed to providing prompt and thorough assistance.
Contact Method:
- Go to "Order History" > "Problem with order" > "View Profile" > "Ask a question".
- Alternatively, refer to the customer-specific contact window mentioned in the Japanese instruction manual.