1. Introduction
Thank you for choosing the Grandder 47 Inch Electric Standing Desk. This manual provides essential information for the safe and efficient use of your new desk. Please read it thoroughly before assembly and operation, and retain it for future reference.
Important Safety Information
- Always ensure the desk is properly anchored to the floor to prevent tipping, especially when adjusting the height or using the desk's maximum weight capacity.
- Keep children and pets away from the desk during operation.
- Ensure no obstacles are in the path of the desk's movement (up or down).
- Do not overload the desk; adhere to the maximum weight capacity specified in the 'Specifications' section.
- Disconnect power before cleaning or maintenance.
2. Setup and Assembly
This desk requires self-assembly. While instructions are not included in this document, please refer to the separate assembly guide provided with your product packaging for detailed step-by-step instructions. Ensure all components are present before beginning assembly.
Components Overview
Familiarize yourself with the desk's main components and dimensions to ensure proper placement and assembly.

Image: Product dimensions for the Grandder 47 Inch Electric Standing Desk. The desk measures 47 inches in width, 27.6 inches in depth, and has a height range of 28 to 45.7 inches. The upper shelf is 8.9 inches deep, and the drawers are 13.7 inches deep.
Tools Required
Assembly tools are not included with the product. Please ensure you have the necessary tools as specified in the separate assembly instructions.
3. Operating Instructions
Your Grandder Electric Standing Desk features an intuitive control panel for height adjustment and preset memory functions.
Height Adjustment
The desk offers a wide height range, allowing you to switch between sitting and standing positions comfortably. The height can be adjusted from 28.3 inches (minimum) to 45.7 inches (maximum).

Image: The desk's height can be adjusted to accommodate various user preferences, ranging from a sitting height of approximately 27.9 inches to a standing height of 45.6 inches.
Control Panel Functions
The hand controller, located on the underside of the desk, allows for precise height adjustments and memory presets.

Image: The Grandder hand controller features a digital display showing the current height, along with buttons for up/down adjustment and memory presets for sitting and standing positions.
- Up/Down Arrows: Press and hold to manually adjust the desk height.
- Memory Presets: The controller includes buttons to save and recall preferred sitting and standing heights. To save a height, adjust the desk to the desired level, then press and hold a preset button (e.g., 'Sit' or 'Stand') until the display flashes.
- Anti-Collision Feature: The desk is equipped with an anti-collision system that automatically stops movement if it encounters an obstacle during adjustment.

Image: The desk supports various office setups, including multiple monitors, keyboards, and other accessories, up to its maximum weight capacity of 220 lbs.
Storage Drawers
The desk features four integrated drawers for convenient storage of office supplies and personal items.

Image: The four storage drawers provide organized space for items such as notebooks, watches, game controllers, and books, helping to keep the desktop clear.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Grandder Electric Standing Desk.
Cleaning
- Before cleaning, unplug the desk from the power outlet.
- Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Ensure no liquid enters the control panel or motor components.
General Care
- Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
- Avoid placing extremely hot or cold items directly on the desk surface without protection.
- Do not drag the desk across the floor; lift it when moving to prevent damage to the legs and floor.
5. Troubleshooting
If you encounter issues with your Grandder Electric Standing Desk, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected; motor overload; control panel error. | Check power connection. Unplug and replug after 10 seconds. Reduce weight on desk. Consult assembly guide for reset procedure if available. |
| Desk moves unevenly or makes unusual noise. | Uneven load; loose fasteners; motor issue. | Distribute weight evenly. Check and tighten all assembly fasteners. If problem persists, contact customer support. |
| Height display shows an error code. | System fault; motor protection activated. | Refer to the specific error code in your assembly manual. Often, unplugging and replugging the power cable can reset the system. |
| Anti-collision feature triggers too easily or not at all. | Sensitivity setting; sensor obstruction. | Ensure no objects are near the desk's path. Some models allow sensitivity adjustment (refer to assembly guide). |
6. Specifications
Detailed technical specifications for the Grandder 47 Inch Electric Standing Desk (Model A205-47DX).
| Feature | Detail |
|---|---|
| Model Number | A205-47DX |
| Brand | Grandder |
| Desk Design | Standing Desk |
| Product Dimensions (D x W x H) | 27.6"D x 47"W x 37"H (Overall) |
| Adjustable Height Range | 28.3" (Min) - 45.7" (Max) |
| Color | Oak |
| Top Material Type | Engineered Wood |
| Base Material | Metal |
| Maximum Weight Recommendation | 220 Pounds |
| Number of Drawers | 4 |
| Lifting Mechanism | Electric |
| Item Weight | 41 Pounds |
| Special Feature | Ergonomic |

Image: The desk is constructed with a robust industrial-grade steel frame and a powerful lift motor, capable of supporting up to 220 lbs.

Image: The desk's high-quality frame and motor undergo over 50,000 lift tests under full load, ensuring super stability and long-term durability.
7. Warranty Information
Grandder provides a warranty for this product against defects in materials and workmanship under normal use. The specific duration and terms of your warranty may vary. Please refer to the warranty card included with your product or contact Grandder customer support for detailed information.
Optional protection plans may be available for extended coverage. Please check with your retailer for details.
8. Customer Support
If you have any questions, require assistance with assembly, or need troubleshooting support, please contact Grandder customer service.
- Online Support: Visit the official Grandder website for FAQs and support resources.
- Email: Refer to your product packaging or the Grandder website for customer service email contact.
- Phone: Refer to your product packaging or the Grandder website for customer service phone number.
When contacting support, please have your model number (A205-47DX) and purchase date ready.





