Introduction
Thank you for choosing LUE BONA Bar Stools. This manual provides detailed instructions to ensure safe assembly, proper use, and effective maintenance of your new bar stools. Please read this guide thoroughly before beginning assembly or use, and retain it for future reference.
Important Safety Information
- Always use within the maximum weight limit of 350 lbs (158 kg). Exceeding this limit may result in damage to the stool or personal injury.
- Do not move the stool while seated to prevent tipping and potential falls.
- Ensure all screws and bolts are securely tightened before each use. Periodically check and re-tighten as necessary.
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Assemble the stool on a soft, clean surface to prevent scratching the product or flooring.
Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Bar Stool Seat (x3)
- Wooden Legs (x12, 4 per stool)
- Footrest Bars (x12, 4 per stool)
- Assembly Hardware (screws, washers, Allen wrench)
- Instruction Manual (this document)
Assembly Instructions
Assembly typically takes 10-15 minutes per stool. It is recommended to assemble on a soft, flat surface to prevent damage.
- Unpack all components and lay them out on a clean, soft surface.
- Attach the four wooden legs to the underside of the bar stool seat using the provided screws and washers. Ensure the legs are oriented correctly, with the wider end at the top connecting to the seat. Do not fully tighten screws yet.
- Connect the footrest bars between the legs. Each leg typically has pre-drilled holes for the footrest bars. Secure them with the remaining hardware.
- Once all legs and footrest bars are in place, gradually tighten all screws evenly until secure. Avoid over-tightening.
- Place the assembled stool on a level surface and check for stability. Adjust leg levelers if necessary.
Figure 1: Illustration of the stool's stable wooden leg structure and footrest for assembly reference.
Usage Guidelines
These bar stools are designed for comfortable seating at bar-height counters.
- Recommended Counter Height: These 27.6-inch seat height stools are suitable for bar counters between 36-39 inches high.
- Comfort: The thick cushioning and ergonomic design provide back support for extended periods of sitting.
- Placement: Ideal for kitchen islands, home bars, counters, or recreation rooms.
Figure 2: Proper usage of the bar stool at a kitchen counter.
Video 1: Overview of the LUIGI Bar Stools Series, showcasing design and features.
Video 2: Detailed look at the LUIGI Bar Stools, highlighting key aspects.
Care and Maintenance
Proper care will extend the life and appearance of your bar stools.
- Cleaning Fabric: For spills, blot immediately with a clean, dry cloth. For general cleaning, use a mild fabric cleaner or a damp cloth with a small amount of mild soap. Test on an inconspicuous area first. Avoid harsh chemicals.
- Cleaning Wooden Legs: Wipe with a soft, damp cloth. Avoid abrasive cleaners.
- Regular Checks: Periodically inspect all connections and tighten any loose screws to maintain stability.
- Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fabric fading and wood discoloration.
Figure 3: Detail of the premium fabric and sturdy wooden legs.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles after assembly. | Screws are not evenly tightened; uneven floor. | Loosen all screws slightly, sit on the stool to settle the legs, then re-tighten all screws evenly. Use leg levelers if available, or place on a flat surface. |
| Parts are missing or damaged. | Shipping damage or packaging error. | Do not proceed with assembly. Contact LUE BONA customer support immediately for replacement parts. |
| Difficulty tightening screws. | Misaligned parts or cross-threaded screws. | Ensure parts are correctly aligned before inserting screws. Do not force screws; if resistance is met, unscrew and re-align. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | YB-293-02 |
| Product Dimensions (D x W x H) | 21.3"D x 19.7"W x 36.2"H |
| Seat Height | 27.6 inches |
| Seat Depth | 16.9 inches |
| Seat Width | 19.7 inches |
| Color | Navy Blue |
| Frame Material | Rubberwood |
| Seat Material | Linen |
| Maximum Weight Capacity | 350 lbs (158 kg) |
| Item Weight (per stool) | 21.8 pounds (9.9 kg) |
| Number of Items in Set | 3 |
Figure 4: Comprehensive dimensions of the bar stool.
Warranty and Customer Support
LUE BONA is committed to providing quality products and customer satisfaction.
- Return Policy: This product is eligible for a 30-day free return, refund, or replacement policy from the date of purchase. Please refer to your retailer's specific return guidelines.
- Customer Support: For any questions, concerns, or assistance with assembly or parts, please contact LUE BONA customer support. Our team is available to help.
- Contact Information: Refer to your purchase documentation or the LUE BONA official website for current customer support contact details.
