Memobarco Vanity Desk with Mirror and Lights

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Memobarco Vanity Desk with Mirror and Lights. Please read all instructions carefully before assembly and use to ensure safe and proper functionality.

Figure 1: Fully assembled Memobarco Vanity Desk with Mirror and Lights.

Safety Information

WARNING: Assembly may require tools and should be done with care to avoid injury. Keep electrical components away from water and follow manufacturer's instructions for safe use. Always ensure the anti-tip device is properly installed to prevent accidental tipping.

Package Contents

Before beginning assembly, verify that all parts listed below are present. If any parts are missing or damaged, please contact customer support.

• Wooden Panels (various sizes for desk, shelves, drawers)
• Mirror with Integrated Lights
• Vanity Stool Components
• Hardware Pack: Cam Locks (A), Screws (B, F, J, M, P), Cam Dowels (C), Wooden Dowels (D), Allen Wrench (E), Drawer Slide Pins (G), Drawer Knobs (H), Drawer Slide Rails (I, N, O), Anti-tip Bracket (K), Wall Anchor (L)

Setup and Assembly

Follow the steps outlined in the assembly video for detailed visual guidance. It is recommended to have two people for assembly.

Key Assembly Steps:

1. Prepare Components: Lay out all panels and hardware. Identify each piece using the labels.
2. Assemble Desk Frame: Connect the main desk panels using screws, cam locks, and wooden dowels as shown in the video.
3. Install Drawer Slides: Secure the drawer slide rails (I, N, O) to the designated sections of the desk frame using screws (F, P).
4. Assemble Drawers: Construct the large and small drawers (26, 27, 31, 32, 33, 34, 35) using the provided panels, cam locks (A), and screws (B, P). Attach drawer knobs (H).
5. Attach Mirror Unit: Secure the mirror unit (21) to the main desk structure.
6. Assemble Stool: Construct the vanity stool (22, 23, 24) using the provided panels and hardware.
7. Install Anti-Tip Device: Drill a hole in the wall at the required position and install the wall anchor (L) and screw (M). Attach the anti-tip bracket (K) to the desk and then to the wall.

Operating Instructions

1. Mirror Lighting

The mirror features integrated LED lights with 3 adjustable color modes (warm, cool, and natural) and adjustable brightness. Connect the vanity to a power outlet to activate the lights.

Figure 2: Touch switch for changing light color and adjusting brightness.

• Change Color Mode: Short touch the power button on the mirror to cycle through warm, cool, and natural light modes.
• Adjust Brightness: Long press the power button to adjust the brightness level within the selected color mode.

2. Sliding Mirror

The mirror unit is designed to slide horizontally, revealing hidden storage shelves behind it. This allows for flexible viewing angles and discreet storage.

Figure 3: Sliding mirror mechanism for accessing hidden storage.

3. Storage Drawers and Shelves

The vanity desk includes 4 drawers (1 large, 3 small) and 7 shelves (3 hidden behind the mirror, 4 open shelves) for organizing makeup, accessories, and other essentials.

Figure 4: Overview of the vanity desk's storage compartments.

Maintenance

To maintain the quality and appearance of your vanity desk:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Mirror Care: Use a glass cleaner specifically designed for mirrors. Do not spray cleaner directly onto the mirror; apply it to a cloth first.
• Electrical Components: Ensure the power cord and connections are free from damage. Disconnect from power before cleaning or moving.

Troubleshooting

If you encounter any issues with your vanity desk, please refer to the following common solutions:

• Lights Not Working: Check if the power cord is securely plugged into both the vanity and the wall outlet. Ensure the wall outlet is functional.
• Sliding Mirror Sticking: Inspect the sliding tracks for any obstructions or debris. Clean the tracks if necessary.
• Drawers Not Closing Smoothly: Check the drawer slides for proper alignment and ensure no items are blocking the drawer's path.

For further assistance, please contact Memobarco customer support.

Specifications

Figure 5: Product dimensions diagram.

Warranty and Support

Memobarco products are designed for quality and durability. For information regarding warranty coverage, returns, or customer support, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.