SuperRC V86 Drone with HD Dual Cameras User Manual

1. Introduction

Thank you for purchasing the SuperRC V86 Drone. This quadcopter is designed for adult beginners, featuring HD dual cameras, propeller safety protection, and user-friendly controls like Headless Mode and One-Key Takeoff/Landing. Please read this manual thoroughly before operating the drone to ensure safe and optimal performance.

Image 1.1: The SuperRC V86 Drone in flight, highlighting its fully protected design.

2. Safety Guidelines

Operating a drone requires responsibility. Adhere to the following safety guidelines to prevent injury or damage:

• Read the Manual: Understand all instructions and warnings before use.
• Age Requirement: This product is intended for adults.
• Flight Environment: Fly in open, unobstructed areas, away from people, animals, buildings, and power lines. Avoid flying in strong winds or adverse weather conditions.
• Line of Sight: Always maintain visual line of sight with the drone during flight.
• Propeller Safety: Keep hands, face, and loose clothing away from rotating propellers. The drone includes propeller guards for added safety.
• Battery Safety: Use only the provided batteries and charging cable. Do not overcharge or puncture batteries. Discontinue use if batteries show signs of damage or swelling.
• Privacy: Respect the privacy of others when using the camera function.
• Legal Compliance: Be aware of and comply with local drone regulations and laws.

Image 2.1: Detail of the drone's propeller protection, designed for collision resistance.

3. Package Contents

Verify that all items listed below are present in your package:

• SuperRC V86 Drone (1)
• Remote Control (1)
• Drone Batteries (3)
• Micro-USB Charging Cable (1)
• Spare Propellers (4)
• Propeller Guards (4)
• Screwdriver (1)
• Handbag (1)

Image 3.1: Overview of the SuperRC V86 Drone and its included accessories.

Image 3.2: A closer look at the drone, remote control, three batteries, spare propellers, charging cable, and screwdriver.

4. Component Identification

4.1 Drone Components

• Propellers: Four rotating blades for lift.
• Propeller Guards: Protective frames around the propellers.
• HD Dual Cameras: Front-facing camera for photo and video capture, with 90° adjustable angle.
• Battery Compartment: Located on the drone's body for battery insertion.
• Power Button: To turn the drone on/off.
• Optical Flow Sensor: Located on the bottom for stable hovering.

Image 4.1: Front view of the SuperRC V86 Drone, showing the camera and propeller guards.

4.2 Remote Control Components

• Left Joystick: Controls ascend/descend and yaw (rotation).
• Right Joystick: Controls forward/backward and left/right flight.
• One-Key Takeoff/Landing Button: Initiates automatic takeoff or landing.
• Headless Mode Button: Activates/deactivates Headless Mode.
• Speed Switch Button: Adjusts flight speed (low/medium/high).
• Photo/Video Button: Captures photos or starts/stops video recording.
• Power Button: To turn the remote control on/off.
• Phone Holder: For mounting a smartphone to view FPV feed (if applicable).

5. Setup

5.1 Charging Batteries

1. Connect the Micro-USB charging cable to a USB power adapter (not included) and to the drone battery.
2. The indicator light on the battery will show charging status (e.g., red for charging, green for fully charged).
3. Charging typically takes approximately 60-90 minutes per battery. Do not leave batteries unattended while charging.

5.2 Installing Drone Battery

1. Ensure the drone is powered off.
2. Carefully insert a fully charged battery into the battery compartment on the drone until it clicks into place.

5.3 Installing Propeller Guards

1. Align each propeller guard with the corresponding arm of the drone.
2. Gently push the guards onto the arms until they are securely attached.

5.4 Remote Control Battery Installation

1. Open the battery compartment on the back of the remote control.
2. Insert 3 AAA batteries (not included), ensuring correct polarity.
3. Close the battery compartment.

5.5 Pairing the Drone and Remote Control

1. Place the drone on a flat, level surface.
2. Power on the drone. The drone's indicator lights will flash.
3. Power on the remote control.
4. Push the left joystick up to its maximum position, then pull it down to its minimum position. The remote control will beep, and the drone's lights will become solid, indicating successful pairing.

6. Operating Instructions

6.1 Pre-Flight Check

• Ensure drone and remote control batteries are fully charged.
• Check that propellers and propeller guards are securely attached and undamaged.
• Confirm the drone is paired with the remote control.
• Choose a safe, open flying area.

6.2 Takeoff

• Manual Takeoff: After pairing, push both joysticks down and outwards simultaneously to unlock the motors. Then, slowly push the left joystick up to ascend.
• One-Key Takeoff: After pairing, press the One-Key Takeoff/Landing button. The drone will automatically ascend and hover at a stable altitude.

6.3 Basic Flight Controls

• Ascend/Descend: Push the Left Joystick up/down.
• Forward/Backward: Push the Right Joystick up/down.
• Turn Left/Right (Yaw): Push the Left Joystick left/right.
• Fly Left/Right (Sideways): Push the Right Joystick left/right.

6.4 Landing

• Manual Landing: Slowly pull the Left Joystick down until the drone lands. Once landed, pull both joysticks down and inwards to stop the motors.
• One-Key Landing: Press the One-Key Takeoff/Landing button. The drone will automatically descend and land.

7. Flight Modes and Features

• Headless Mode: Press the Headless Mode button. In this mode, the drone's orientation is relative to the pilot, regardless of the drone's front direction. Press again to exit.
• Altitude Hold: The drone automatically maintains its altitude, allowing for easier control of horizontal movement.
• Optical Flow Positioning Hover: Utilizes a downward-facing sensor to maintain a stable position, especially useful indoors or in areas with good ground texture.
• Obstacle Avoidance: The drone is equipped with sensors to detect and avoid obstacles, enhancing flight safety.
• Rolling/3D Flips: Consult the remote control diagram for the specific button to perform 360-degree flips. Ensure sufficient altitude before attempting.
• Speed Adjustment: Use the Speed Switch button to cycle through low, medium, and high-speed modes.

Image 7.1: The drone's optical flow positioning and obstacle avoidance features in action.

8. Camera Operation

The SuperRC V86 Drone features HD dual cameras with a 90° adjustable angle for capturing photos and videos.

• Adjusting Camera Angle: The camera angle can be adjusted manually or via the remote control (refer to remote control diagram for specific button).
• Taking Photos: Press the Photo/Video button once to capture a photo.
• Recording Video: Press and hold the Photo/Video button to start recording video. Press and hold again to stop recording.
• Viewing Footage: Footage is typically stored on a microSD card (not included) inserted into the drone, or streamed to a connected smartphone via Wi-Fi and the companion app (download instructions usually found in a separate quick start guide or on the product packaging).

Image 8.1: The drone's HD camera, highlighting its 90-degree adjustable angle.

9. Battery Charging and Care

Proper battery care extends battery life and ensures safe operation.

• Always use the provided Micro-USB charging cable.
• Do not leave charging batteries unattended.
• Store batteries in a cool, dry place away from direct sunlight and heat.
• If the drone will not be used for an extended period, charge the batteries to approximately 50% before storage.
• Do not attempt to charge damaged or swollen batteries. Dispose of them properly according to local regulations.

10. Maintenance

• Cleaning: Use a soft, dry cloth to clean the drone and remote control. Avoid using water or solvents.
• Propeller Replacement: If a propeller is damaged, use the included screwdriver to carefully remove the old propeller and install a new one from the spare set. Ensure the correct propeller (A or B) is installed on the corresponding motor.
• Storage: Store the drone and its accessories in the provided handbag in a cool, dry place when not in use.

11. Troubleshooting

12. Specifications

• Brand: SuperRC
• Model Name: V86
• Manufacturer Part Number: M9
• UPC: 738253954299
• Color: Grey
• Item Weight: 0.2 Kilograms (7 ounces)
• Product Dimensions: 7"L x 6"W x 2"H
• Video Capture Resolution: 720p
• Video Capture Format: MP4
• Connectivity Technology: Wi-Fi
• Control Type: Remote Control
• Material: Plastic
• Battery Type: Lithium Ion
• Battery Capacity: 1000 Amp Hours (per drone battery)
• Remote Control Batteries: 3 AAA batteries (not included)
• Skill Level: Beginner
• Special Features: Adjustable Camera, One Button Return, One Key Rotation, Rechargeable, Speed Adjustment, Optical Flow Hover, Obstacle Avoidance, Headless Mode, One-Key Takeoff/Landing.

13. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official SuperRC website. Keep your proof of purchase for any warranty claims.