T-SUN Rechargeable LED Wall Light with Motion Sensor

1. Introduction

Thank you for choosing the T-SUN Rechargeable LED Wall Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new wall light. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

• This product is designed for indoor use. While durable, avoid direct exposure to heavy moisture or extreme temperatures.
• Do not attempt to disassemble or modify the light. This may cause damage and void the warranty.
• Keep the light away from flammable materials.
• Use only the provided Type-C cable for charging.
• Ensure the mounting surface is clean and dry before installation.

3. Package Contents

Please check the package for the following items:

• T-SUN LED Wall Light (x2)
• Remote Control (x1)
• Type-C Charging Cable (x1)
• Mounting Plates (x2)
• Screws and Wall Plugs (for screw installation)
• Foam Adhesive Pads (for adhesive installation)
• User Manual (this document)

4. Product Overview

Familiarize yourself with the components and features of your T-SUN LED Wall Light.

Figure 1: Product Components
This diagram illustrates the key features of the wall light, including its matte black design, ABS+PC material construction, Type-C charging port, integrated on/off switch, motion sensor, and adjustable light design.

• Matte Black Design: Modern and minimalist aesthetic.
• ABS + PC Material: Durable and corrosion-resistant construction.
• Type-C Charging Port: For convenient and fast recharging.
• On/Off Switch: Manual control for power.
• Motion Sensor: Detects movement for automatic illumination.
• Adjustable Light Design: Allows customization of beam angle.

5. Charging Instructions

Before first use, fully charge the wall light. The light features a 3600mAh rechargeable battery.

Figure 2: Charging Process
This image shows the Type-C charging port and the indicator lights. A red light indicates charging, and a green light indicates a full charge. Compatible charging sources include standard chargers, laptops, power banks, and Type-C sockets.

1. Locate the Type-C charging port on the side of the wall light.
2. Connect the provided Type-C cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port, power bank).
3. A red indicator light will illuminate, indicating that the light is charging.
4. Charging typically takes approximately 7 hours for a full charge.
5. Once fully charged, the indicator light will turn green.

Battery Life:

• Continuous ON Mode: 14 to 60 hours (depending on brightness setting).
• Motion Sensor Mode: Over 1000 activations on a full charge.

6. Installation

The T-SUN wall light offers two installation methods: adhesive mounting or screw mounting.

Figure 3: Installation Steps
This image demonstrates both adhesive and screw-based installation methods. Both methods involve attaching a mounting plate to the wall first, then securely snapping the wall light onto the plate.

Method 1: Adhesive Mounting (for smooth surfaces)

1. Clean and dry the desired wall surface thoroughly.
2. Peel off the protective film from the foam adhesive pad and firmly press it onto the back of the mounting plate.
3. Remove the remaining protective film from the adhesive pad and press the mounting plate firmly onto the wall for at least 30 seconds.
4. Align the wall light with the mounting plate and snap it into place, ensuring the switch faces downwards.

Method 2: Screw Mounting (for all surfaces)

1. Mark the desired installation location on the wall.
2. Drill two holes at the marked positions, insert the wall plugs, and then secure the mounting plate to the wall using the provided screws.
3. Align the wall light with the mounting plate and snap it into place, ensuring the switch faces downwards.

The wireless design allows for versatile placement in areas such as living rooms, bedrooms, hallways, and staircases.

7. Operating Modes

The T-SUN wall light offers three operating modes, selectable via a toggle switch on the unit or the remote control.

Figure 4: Lighting Modes
This image illustrates the three available lighting modes: Auto Mode (motion-activated), Always ON Mode (continuous illumination), and OFF Mode (light is completely off).

• Auto Mode (Motion Sensor): In dark conditions, the light will automatically turn on for 20-30 seconds when motion is detected within a 3-5 meter range and a 120° detection angle. It will turn off automatically after 22 seconds of no movement.
• Always ON Mode: The light remains continuously illuminated until manually switched off or the battery depletes.
• OFF Mode: The light is completely off and will not activate.

8. Adjustable Settings

Customize your lighting experience with adjustable brightness and beam angle.

Figure 5: Adjustable Beam Angle and Brightness
This image demonstrates the flexibility of the light, allowing users to adjust the beam angle from 0° to 120° and select between high and low brightness modes. Various lighting patterns, including pure upward, pure downward, and combined, are shown.

• Beam Angle Adjustment: The internal light guide can be manually adjusted from 0° to 120°. This allows for pure upward, pure downward, or combined upward and downward lighting to suit your preference.
• Brightness Levels: The light offers two brightness levels (High and Low) for 3000K warm white illumination. These can be adjusted via the remote control.

9. Remote Control Usage

The included remote control provides convenient access to various functions of the wall light.

Figure 6: Remote Control Functions
This image displays the remote control, highlighting its various buttons for power on/off, brightness adjustment, switching between Auto and Continuous modes, and setting a timer for 10, 20, or 30 minutes.

• Power Button: Turns the light On or Off.
• Mode Selection: Switch between Auto (motion sensor) and Continuous (Always ON) modes.
• Brightness Adjustment: Increase or decrease the light intensity.
• Timer Function: Set the light to turn off automatically after 10, 20, or 30 minutes.

10. Maintenance

To ensure the longevity and optimal performance of your T-SUN wall light, follow these simple maintenance guidelines:

• Cleaning: Wipe the surface of the light with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
• Battery Care: For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
• Sensor Cleaning: Ensure the motion sensor lens is clean and free from dust or obstructions for accurate detection.

11. Troubleshooting

If you encounter any issues with your wall light, please refer to the following common problems and solutions:

• Light does not turn on:
  • Check if the battery is charged. Recharge if necessary.
  • Ensure the light is not in OFF mode. Switch to Auto or Always ON mode.
  • In Auto mode, verify there are no obstructions blocking the motion sensor.
• Motion sensor is not detecting movement:
  • Ensure the light is in Auto mode.
  • Check for obstructions in front of the sensor.
  • Verify the ambient light conditions; the sensor primarily activates in low light.
• Battery life is shorter than expected:
  • Ensure the light is fully charged.
  • Higher brightness settings consume more power. Try a lower brightness setting.
  • Frequent activations in Auto mode will reduce battery life.
• Remote control is not working:
  • Ensure there are no obstructions between the remote and the light.
  • Check if the remote control battery needs replacement.

12. Specifications

13. Warranty and Customer Support

T-SUN is committed to customer satisfaction. If you have any concerns regarding the quality or operation of your wall light, please do not hesitate to contact our dedicated customer service team. We are ready to assist you and ensure a positive experience with our product.

Please refer to your purchase documentation for specific warranty details and contact information.