1. Introduction
Thank you for choosing the Syntecno LF-C01 Under Desk Walking Pad. This compact and portable treadmill is designed to help you integrate physical activity into your daily routine, whether at home or in the office. Please read this manual thoroughly before initial use to ensure safe operation, proper setup, and effective maintenance of your device. Keep this manual for future reference.
2. Safety Instructions
To reduce the risk of serious injury, always follow basic precautions when using this walking pad. Read all instructions before use.
- Placement: Place the walking pad on a flat, stable surface. Ensure there is at least 0.6 meters (2 feet) of clear space behind the walking pad and 0.6 meters (2 feet) on each side.
- Power Source: Connect the walking pad to a properly grounded outlet. Do not use extension cords or adapters.
- User Weight: Do not exceed the maximum user weight capacity (refer to specifications).
- Children and Pets: Keep children and pets away from the walking pad during operation.
- Footwear: Always wear appropriate athletic footwear when using the walking pad.
- Health Conditions: Consult a physician before starting any exercise program, especially if you have pre-existing health conditions.
- Emergency Stop: Familiarize yourself with the emergency stop procedure.
- Maintenance: Unplug the walking pad before cleaning or performing any maintenance.
- Storage: Store the walking pad in a dry, safe place away from moisture and extreme temperatures.
3. Package Contents
Carefully unpack the box and ensure all the following items are present:
- Syntecno LF-C01 Under Desk Walking Pad
- Remote Control
- 2 x Lubricant Bottles
- Hexagonal Wrench
- Power Cord
- User Manual (this document)
If any items are missing or damaged, please contact customer support immediately.
4. Product Overview
The Syntecno LF-C01 Walking Pad features a robust design for comfortable and effective exercise.

Image: A woman in athletic wear running on the Syntecno LF-C01 Under Desk Walking Pad, demonstrating its use for active exercise.

Image: A woman walking on the Syntecno LF-C01 Under Desk Walking Pad while using a laptop at a standing desk, illustrating its suitability for office environments.

Image: A close-up view of the Syntecno LF-C01 Walking Pad's integrated LED display, showing real-time metrics such as time, distance, and calories burned.
5. Setup
The Syntecno LF-C01 Walking Pad comes pre-assembled for immediate use.
- Unpacking: Carefully remove the walking pad from its packaging.
- Placement: Position the walking pad on a firm, level surface. Ensure adequate clearance around the unit as described in the safety instructions.
- Power Connection: Plug the power cord into the walking pad's power input, then plug the other end into a standard electrical outlet.
- Remote Control: Ensure the remote control has working batteries. If not, insert or replace them according to the markings inside the battery compartment.
- Initial Check: Before stepping on, briefly turn on the walking pad at a low speed to ensure the belt moves smoothly and the display functions correctly.
6. Operating Instructions
The walking pad is controlled via the included remote control.
6.1 Powering On/Off
- Power On: Press the 'Power' button on the remote control. The LED display will illuminate.
- Power Off: Press the 'Power' button again to stop the walking pad and turn off the display.
6.2 Adjusting Speed
The walking pad offers a speed range of 1 to 6 km/h.
- Increase Speed: Press the '+' button on the remote control to increase the speed.
- Decrease Speed: Press the '-' button on the remote control to decrease the speed.
- Start/Pause: Use the 'Start/Pause' button to begin or temporarily stop your workout.
6.3 LED Display
The integrated LED display provides real-time feedback on your workout:
- SPD: Current speed (km/h)
- TIME: Duration of your workout (minutes:seconds)
- DIST: Distance covered (kilometers)
- CAL: Estimated calories burned
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your walking pad.
7.1 Lubrication
The walking belt requires periodic lubrication to reduce friction and wear. Use the provided silicone oil.
- Frequency: Lubricate every 30-50 hours of use, or every 1-2 months with regular use.
- Procedure:
- Unplug the walking pad from the power outlet.
- Lift one side of the walking belt.
- Apply a small amount of silicone oil (approx. 5-10 ml) evenly under the center of the belt.
- Repeat on the other side.
- Plug in the walking pad and run it at a low speed (e.g., 1 km/h) for 5 minutes without a user to distribute the lubricant.
7.2 Cleaning
- Exterior: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Belt: Periodically clean the walking belt to remove dust and debris.
- Underneath: Occasionally clean the area under the walking pad to prevent dust accumulation.
7.3 Storage
Thanks to its compact design and integrated wheels, the walking pad is easy to store.
- Ensure the walking pad is powered off and unplugged.
- Use the integrated wheels to move the unit.
- Store it under a bed, sofa, or desk in a dry, cool place.
8. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Walking pad does not power on | Power cord not connected; No power from outlet; Remote control batteries dead | Check power cord connection; Test outlet with another device; Replace remote control batteries |
| Belt stops or slips | Belt too loose; Insufficient lubrication; Overload | Adjust belt tension (refer to specific instructions in full manual if available); Lubricate the belt; Reduce user weight |
| Unusual noise during operation | Lack of lubrication; Loose components; Foreign object | Lubricate the belt; Check for loose screws and tighten; Inspect for and remove any foreign objects |
| Remote control not responding | Dead batteries; Obstruction between remote and sensor | Replace remote control batteries; Ensure clear line of sight to the walking pad's sensor |
If the problem persists after attempting these solutions, please contact customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | LF-C01 |
| Brand | Syntecno |
| Motor Power | 2.0 HP (2 Kilowatt) |
| Speed Range | 1 - 6 km/h |
| Frame Material | Alloy Steel |
| Product Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions (L x W x H) | 112 x 57 x 12 cm |
| Item Weight | 19 Kilograms |
| Power Source | Electric Cable |
| Display Features | LED (Speed, Time, Distance, Calories) |
| Special Features | Compact design, Portable, Remote Control, Shock Absorption |
| Assembly Required | No |
10. Warranty and Support
This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or contact Syntecno customer support for detailed information regarding warranty terms and conditions.
For technical assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please contact Syntecno customer support through the contact information provided with your purchase or on the official Syntecno website.