Introduction
Thank you for choosing the OILSAO Electric Flosser. This manual provides essential information for the safe and effective use of your new device. Please read it thoroughly before first use and keep it for future reference. The OILSAO Electric Flosser is designed to provide a deep and gentle clean, removing plaque and food particles from between teeth and along the gumline, contributing to improved oral hygiene.
Safety Information
May contain general safety warnings about proper use and handling, including keeping it away from water when not in use and not using it with damaged cords or with certain medical conditions.
Package Contents
Your OILSAO Electric Flosser package includes the following items:
- 1 x OILSAO Electric Flosser device
- 54 x Refill Floss Heads (in a travel-friendly box)
- 1 x USB-C Charging Cable
- 1 x Storage Base

Setup
1. Charging the Device
Before initial use, fully charge the device. The flosser features a USB-C charging port located at the bottom, covered by a protective cap. A full charge provides approximately 60 days of battery life. Ensure the charging port is dry before connecting the USB-C cable.

2. Attaching a Floss Head
- Align a new floss head with the top of the flosser handle.
- Gently push the floss head onto the handle until it clicks into place. Ensure it is securely attached.

Operating Instructions
1. Powering On and Selecting Speed
- Press the power button to turn on the device. It will start at the lowest speed setting.
- Press the speed button repeatedly to cycle through the 5 adjustable speeds. Choose a speed that is comfortable for your gums and cleaning needs.
2. Flossing Technique
Wet the floss head and your teeth before use. Place the floss head at a 90-degree angle to your teeth. Follow the dentist-recommended Bass Method, moving the tip in a gentle, circular motion. While flossing, gently pull the floss head to form a 'C' shape around the tooth. The 60° oscillation technology helps reach deep between teeth and below the gumline.


3. Powering Off
Press and hold the power button to turn off the device.
Official Product Video
Maintenance
1. Cleaning the Device
The OILSAO Electric Flosser has an IPX7 waterproof rating, allowing it to be rinsed clean under tap water. After each use, rinse the floss head and the device under running water. Store it in the provided storage box to keep it hygienic.
2. Replacing Floss Heads
Replace the floss head every 2 weeks or as needed, depending on usage and wear. To remove a used floss head, place the head against a flat surface and push down on the handle to detach it. Align the groove of a new floss head and snap it into place.

3. Battery Care
Charge the device before first use and every 60 days for optimal performance. Avoid using the device with hot water or near a heat source to prevent damage.
Troubleshooting
If you encounter any issues with your OILSAO Electric Flosser, please try the following:
- Device not turning on: Ensure the device is fully charged. Check the charging cable and adapter for any damage.
- Weak vibrations: The battery might be low. Recharge the device.
- Floss head not staying on: Ensure the floss head is correctly aligned and snapped into place. If the issue persists, try a new floss head.
- Unusual noise: Turn off the device and check if the floss head is properly attached. If the noise continues, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 5.41 x 8.84 x 1.42 inches; 11.36 ounces |
| Item Model Number | ABB992 |
| Batteries | 1 Lithium Ion battery required (included) |
| Manufacturer | OILSAO |
| Power Source | Battery Powered |
| Special Features | 5 adjustable speeds, 54 refill heads, 5X plaque removal, Dual-floss design, Gentle on gums |
| Product Benefits | Fights Bad Breath Source, No More Bleeding Gums, Perfect for Sensitive Gums, Removes Plaque |
| Unit Count | 1.00 Count |
Warranty and Support
OILSAO offers a lifetime smile guarantee and dedicated support for your Electric Flosser. If you have any questions, concerns, or require assistance, please contact our customer support team. Our support ensures help is available, even after the standard return period ends.
