1. Introduction
Thank you for choosing the Garvee 24-inch Pressure Washer Surface Cleaner. This manual provides essential information for the safe and efficient assembly, operation, maintenance, and troubleshooting of your new surface cleaner. Designed for large outdoor areas, this attachment significantly reduces cleaning time and effort on surfaces such as concrete, wood, tile, and brick.
2. Safety Information
Always prioritize safety when operating pressure washing equipment. Failure to follow these instructions may result in serious injury or property damage.
- Read Your Pressure Washer Manual: Always refer to your pressure washer's instruction manual for specific safety guidelines and operating procedures.
- Wear Protective Gear: Always wear appropriate eye protection, hearing protection, and sturdy footwear. Long pants and gloves are also recommended.
- Keep Hands Clear: Never place hands or any body part under the surface cleaner while it is connected to a pressure washer and operating. The rotating nozzles operate at high pressure.
- Secure Connections: Ensure all connections (hoses, nozzles, handles) are securely tightened before operation to prevent leaks and accidental disconnections.
- Operating Pressure: This surface cleaner is rated for a maximum pressure of 4900 PSI and 13.5 GPM. Ensure your pressure washer's output does not exceed these limits. Recommended for pressure washers above 2000 PSI & 2 GPM.
- Stable Surface: Operate the surface cleaner on stable, level surfaces. Avoid uneven terrain where the unit may tip.
- Children and Pets: Keep children and pets away from the operating area.
- Water Temperature: Suitable for cold water, hot water, and even soap water. Max water temperature: 168°F.
3. Product Overview & Components
The Garvee 24-inch Pressure Washer Surface Cleaner is constructed from durable stainless steel and brass, designed for longevity and effective cleaning. It features a 24-inch cleaning path, dual handles, and four universal wheels for enhanced mobility.

Figure 1: Garvee 24-inch Pressure Washer Surface Cleaner, showing the main unit with handles and wheels.
Key Components:
- 24-inch Cleaning Deck: Wide cleaning path for faster coverage.
- Dual Handles: Adjustable for comfortable operation and control, reducing strain.
- Four Universal Wheels: 360° swivel wheels for easy maneuverability and stability.
- Two High-Pressure Rotating Nozzles: Located underneath the deck for streak-free cleaning.
- Splash-Free Skirt: High-density nylon brush skirt minimizes overspray, keeping the user and surrounding areas drier.
- 3/8-inch Quick Plug Inlet: For quick and secure attachment to your pressure washer hose.
- Reinforced Bearing: Fully sealed bearings prevent leaks and blockages, ensuring longer service life.

Figure 2: Detailed view of the surface cleaner's components, highlighting durable materials and design features.
4. Setup
Follow these steps to assemble your Garvee Surface Cleaner:
- Attach the Handle: Secure the lower handle bars to the base unit using the provided pins or screws.
- Tighten Quick Plug: Ensure the 1/4-inch quick plug on the base is securely tightened.
- Connect Upper and Lower Handles: Link the upper and lower handle sections together, securing them with the appropriate fasteners.
- Route the Hose: Pass the high-pressure hose through the designated clips or holes in the handle assembly.
- Connect to Trigger Handle: Connect the high-pressure hose to the trigger handle.
- Connect to Pressure Washer: Attach the surface cleaner's trigger handle to your pressure washer's hose. Ensure all connections are tight to prevent leaks.

Figure 3: Visual guide for quick installation, showing handle attachment and hose connections.
Video 1: User-generated content demonstrating the ease of assembly and initial setup of the surface cleaner.
5. Operation
Operating the Garvee Surface Cleaner is designed to be straightforward and efficient:
- Start Pressure Washer: Turn on your pressure washer according to its manufacturer's instructions.
- Engage Trigger: Squeeze the trigger on the handle to start the water flow and activate the rotating nozzles. The unit will begin to hover slightly above the surface.
- Guide the Cleaner: Slowly walk behind the surface cleaner, guiding it across the area you wish to clean. The universal wheels allow for smooth movement and control.
- Overlap Passes: Overlap each cleaning pass slightly to ensure complete and streak-free coverage.
- Adjust Handle: Adjust the dual handles to a comfortable height to prevent strain on your back and arms.
- Edge Cleaning: For edges and corners, you may need to tilt the unit slightly or use a separate pressure washer wand for precision.

Figure 4: Operating the surface cleaner on a patio, highlighting its efficiency and user comfort.
Video 2: User-generated content showcasing the surface cleaner in action, demonstrating its effective cleaning on a concrete surface.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your surface cleaner:
- Clean After Each Use: Rinse the surface cleaner thoroughly with clean water after each use to remove dirt, debris, and chemical residues.
- Check Nozzles: Regularly inspect the rotating nozzles for clogs or damage. Clear any blockages using a nozzle cleaning tool (not included) or a thin wire. Replace worn or damaged nozzles promptly.
- Lubricate Bearings: The unit is equipped with fully sealed bearings. Periodically check for smooth rotation and lubricate if necessary, following general lubrication guidelines for pressure washer accessories.
- Inspect Hoses and Connections: Check all hoses and quick-connect fittings for wear, cracks, or leaks. Replace any damaged components.
- Storage: Store the surface cleaner in a clean, dry place, away from direct sunlight and extreme temperatures. Disconnect all hoses and drain any remaining water before storage.
7. Troubleshooting
If you encounter issues with your surface cleaner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or low pressure | Clogged nozzles; Kinked hose; Insufficient water supply; Pressure washer issue | Clean nozzles; Straighten hose; Ensure adequate water supply; Check pressure washer manual |
| Uneven cleaning or streaks | Clogged or damaged nozzles; Too fast movement; Insufficient overlap | Clean/replace nozzles; Slow down movement; Increase overlap between passes |
| Water leaks from connections | Loose connections; Worn O-rings or seals | Tighten all connections; Replace O-rings/seals as needed |
| Unit does not hover or move smoothly | Insufficient pressure from washer; Damaged wheels; Debris under skirt | Check pressure washer output; Inspect/clean wheels; Remove debris |
8. Specifications
Technical specifications for the Garvee 24-inch Pressure Washer Surface Cleaner:
| Feature | Specification |
|---|---|
| Brand | Garvee |
| Model Number | mNjVOkV-3WckXBBHq2IczANO0H |
| Product Dimensions (L x W x H) | 25.2"L x 25.2"W x 10.24"H |
| Item Weight | 31.17 Pounds |
| Maximum Pressure | 4900 PSI |
| Maximum Water Flow | 13.5 GPM |
| Connection Type | 3/8 in Quick Plug |
| Material | Stainless Steel, Brass |
| Number of Items | 1 |
9. Warranty & Support
For warranty information or product support, please refer to the documentation included with your purchase or visit the official Garvee store. General return policies may apply as per retailer terms.
Visit the official Garvee Store: Garvee Store on Amazon