DEWENWILS B0FPXF5RYK

DEWENWILS Outdoor Digital Power Strip Timer Instruction Manual

Model: B0FPXF5RYK

1. Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your DEWENWILS Outdoor Digital Power Strip Timer. This device is designed to automate the power supply to outdoor electrical appliances, offering convenience and energy management. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Safety Information

To prevent personal injury or property damage, always observe the following safety precautions:

3. Product Overview

The DEWENWILS Outdoor Digital Power Strip Timer features a robust design suitable for various outdoor applications. It includes a digital display for programming and multiple grounded outlets.

DEWENWILS Outdoor Digital Power Strip Timer with weatherproof housing and stake, showing the digital display and three grounded outlets.

Image 1: DEWENWILS Outdoor Digital Power Strip Timer. The image displays the timer unit with its weatherproof housing open, revealing the digital display and three grounded outlets. A ground stake is attached, and a power cord with a 3-prong plug is visible. An additional indoor-style timer with a single outlet is also shown for comparison, though the manual focuses on the outdoor unit.

Key Components:

4. Setup and Initial Configuration

4.1 Physical Installation

  1. Assemble Stake: Connect the ground stake to the bottom of the timer unit.
  2. Positioning: Choose a suitable outdoor location where the timer can be securely wedged into the ground. Ensure it is close enough to a grounded outdoor power outlet.
  3. Plug In: Plug the timer's power cord into a grounded outdoor electrical outlet.

4.2 Setting Current Time

The timer operates on a 24-hour system (military time) and does not display AM/PM indicators.

  1. Enter Clock Mode: Press and hold the CLOCK button for approximately 3 seconds until the display flashes.
  2. Set Day: While in Clock Mode, press the WEEK button repeatedly to select the current day (e.g., MO, TU, WE, TH, FR, SA, SU).
  3. Set Hour: Press the HOUR button repeatedly to set the current hour (00-23).
  4. Set Minute: Press the MIN button repeatedly to set the current minute (00-59).
  5. Exit Clock Mode: Press the CLOCK button once to save the settings and return to normal display.

5. Operating Instructions

5.1 Programming On/Off Settings

The timer supports up to 20 ON/OFF programs. Each program consists of an ON time and an OFF time.

  1. Enter Program Mode: Press the PROG button. The display will show "1 ON".
  2. Set Program 1 ON Time:
    • Press WEEK to select the day(s) for this program. Options include individual days, weekdays, weekends, or all days.
    • Press HOUR to set the desired ON hour.
    • Press MIN to set the desired ON minute.
  3. Set Program 1 OFF Time: Press PROG again. The display will show "1 OFF". Repeat the steps above to set the OFF day(s), hour, and minute.
  4. Continue Programming: Press PROG to cycle through programs 2 ON, 2 OFF, up to 20 ON, 20 OFF. Repeat the setting steps for each desired program.
  5. Exit Program Mode: Press the CLOCK button to save all programs and return to the current time display.

5.2 Random Function

The random function can be used to make your home appear occupied by turning lights ON at random times. It activates up to 5 events daily, with each event remaining ON for 15 minutes.

5.3 Manual Override (ON/AUTO/OFF)

The ON/AUTO/OFF button allows you to manually control the timer's output, overriding programmed settings temporarily.

Press the ON/AUTO/OFF button repeatedly to cycle through these modes.

6. Maintenance

The DEWENWILS Outdoor Digital Power Strip Timer requires minimal maintenance.

7. Troubleshooting

Problem Possible Cause Solution
Timer display is blank. No power to the unit. Check if the timer is properly plugged into a live outlet. Verify the outlet has power.
Appliances do not turn ON/OFF as programmed.
  • Incorrect program settings.
  • Timer is in ON or OFF manual mode.
  • Current time is incorrect.
  • Review and re-enter program settings (Section 5.1).
  • Ensure the timer is in AUTO mode (Section 5.3).
  • Verify and correct the current time (Section 4.2).
Random function not working. Random function not activated. Activate the random function using the MODE button (Section 5.2).
Unit feels warm. Overload or normal operation. Ensure total wattage of connected devices does not exceed 1875W. Slight warmth during operation is normal. If excessively hot, disconnect immediately.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact DEWENWILS customer service directly. Contact details are typically available on the manufacturer's official website or through your point of purchase.

Related Documents - B0FPXF5RYK

Preview Dewenwils Power Saving Strip Timer HPST16M Instruction Manual
User manual for the Dewenwils Power Saving Strip Timer, model HPST16M. Learn about product features, installation, operation, and specifications for this 24-hour programmable timer.
Preview Dewenwils Power Saving Strip Timer Instruction Manual
Comprehensive instruction manual for the Dewenwils Power Saving Strip Timer (Model HPST16D), covering setup, programming, features, safety information, and warranty.
Preview Dewenwils HOMT01B Outdoor Mechanical Timer Box Instruction Manual
Comprehensive instruction manual for the Dewenwils HOMT01B Outdoor Mechanical Timer Box, detailing specifications, installation steps, wiring diagrams, operating instructions, and warranty information for reliable outdoor electrical timing applications.
Preview Dewenwils Outdoor Mechanical Timer Box HOMT01A Installation and Operation Manual
Comprehensive guide for the Dewenwils Outdoor Mechanical Timer Box (SKU: HOMT01A), covering installation instructions, specifications, wiring diagrams for various applications (120VAC, 240VAC, 277VAC), operating instructions, and a one-year limited warranty.
Preview Dewenwils Outdoor Mechanical Pin Timer HOMT11A Instruction Manual
Instruction manual for the Dewenwils Outdoor Mechanical Pin Timer, model HOMT11A. Includes safety warnings, product layout, installation, operation instructions, specifications, and warranty information.
Preview Dewenwils Indoor Mechanical Pin Timer Instruction Manual
Instruction manual for the Dewenwils Indoor Mechanical Pin Timer, detailing operation, specifications, and warranty information.