Genmitsu Kortek 10W Laser Engraver Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective operation of your Genmitsu Kortek 10W Laser Engraver. Please read this manual thoroughly before operating the machine to ensure proper setup, usage, and maintenance. The Genmitsu Kortek 10W is a versatile laser engraver designed for precision engraving and cutting on a wide range of materials, featuring a 10W laser module and an additional 1064nm infrared laser module for specialized applications.

An overview of the Genmitsu Kortek laser engraver, showcasing its compact design and main components.

2. Safety Information

Operating a laser engraver requires strict adherence to safety protocols. Failure to follow these guidelines can result in serious injury or damage to the equipment.

• Class 1 Laser Certification: The Kortek engraver is designed with Class 1 laser certification, indicating a high level of safety under normal operating conditions.
• Automatic Tilt-Stop Protection: The machine is equipped with a sensor that automatically stops operation if the engraver is tilted or moved unexpectedly, preventing accidental laser exposure.
• Emergency Safety Switch: An easily accessible emergency stop button is provided to immediately halt all operations in case of an emergency.
• Protective Laser Shield: The laser module includes a protective shield to minimize direct laser exposure during operation.
• Laser Goggles Included: Always wear the provided laser safety goggles when the machine is in operation, even with the protective shield in place.
• Ventilation: Ensure adequate ventilation in your workspace to dissipate fumes and smoke produced during engraving and cutting.
• Flammable Materials: Do not engrave or cut highly flammable materials without proper precautions and supervision.

Visual representation of the Kortek's safety features: Class 1 laser certification, automatic tilt-stop protection, the integrated protective laser shield, and included laser goggles for user safety.

3. Setup

Follow these steps to set up your Genmitsu Kortek Laser Engraver.

3.1 Initial Assembly

Installation of the Kortek laser engraver typically involves three simple steps. Refer to the quick start guide or the full assembly video (if available) for detailed visual instructions.

3.2 Software and Driver Installation

1. Connect the Kortek to your PC using the provided USB cable.
2. Install the corresponding driver for your operating system (macOS or Windows). All necessary files can be found on the included SD card.
3. For PC software like Cutlabx or Lightburn, ensure the correct COM number is selected in the console. For Windows, this is typically CH341 COM under Port in Device Manager. For macOS, it may appear as Wchusbserial or similar.

3.3 Wi-Fi Connection (Genmitsu APP)

1. Download the Genmitsu APP from your device's app store.
2. Connect your mobile device to the Wi-Fi network named "Genmitsu-Kortek".
3. Ensure both your device and the Kortek engraver are on the same Wi-Fi network.
4. Open the Genmitsu APP and select your machine model (Kortek 200 x 200 mm).
5. You can now control the Kortek through the app for previewing, positioning, and engraving.

A setup showing the laser engraver with an optional honeycomb working bed and an external air pump, which can enhance cutting performance and reduce charring.

4. Operating Instructions

The Genmitsu Kortek 10W Laser Engraver offers versatile capabilities for various projects.

4.1 General Operation

• Working Area: The machine provides a working area of 200 x 150mm.
• Fixed Focus Module: The built-in fixed focus module allows for quick and easy focusing.
• Offline Engrave Button: For TF card files, a short press previews and resets, while a long press initiates engraving. During operation, a short press pauses, and a long press stops the process.
• Precision: Driven by 35mm stepper motors, the Kortek achieves ±0.01mm repeatability and 0.01mm accuracy with a laser spot smaller than 0.05 × 0.05mm.

Close-up of the 35mm stepper motor, highlighting its role in achieving ultra-precise engraving with ±0.01mm repeatability.

4.2 Engraving and Cutting Capabilities

The 10W laser module is capable of cutting up to 10mm of wood and opaque acrylic. The 1064nm infrared laser module is specifically designed for engraving metals, plastics, glass, and leather.

Illustration of the 10W laser module's ability to cut through 10mm pine wood in a single pass.

Supported Materials:

A visual guide to the diverse materials compatible with the Kortek engraver, including gold, silver, copper, titanium, acrylic, silicone, leather, and paper.

Metal Engraving:

The 1064nm infrared laser module is ideal for marking metals such as stainless steel, aluminum, and brass. Ensure the metal surface is not reflective before engraving.

Showcase of various items engraved on metal, such as pendants, cups, and keychains, demonstrating the machine's capability for detailed metal work.

An image highlighting the 1W 1064nm infrared laser module, specifically designed for engraving on various metals and non-reflective materials.

4.3 Software Control (Genmitsu APP)

The Genmitsu APP provides wireless control for previewing, positioning, and engraving directly from your smartphone or tablet.

A smartphone screen displaying the Genmitsu app interface, demonstrating its "All in One" functionality for previewing, positioning, and engraving designs.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your laser engraver.

• Cleaning: Regularly clean the laser lens and the machine's working area to prevent debris buildup, which can affect laser performance and accuracy. Use a soft, lint-free cloth and appropriate cleaning solutions for optical components.
• Lubrication: Periodically check and lubricate the guide rails and moving parts as recommended in the detailed product manual (if available) to ensure smooth operation.
• Firmware Updates: Check the Genmitsu website or app for any available firmware updates to ensure your machine has the latest features and performance enhancements.

6. Troubleshooting

This section addresses common questions and issues you might encounter.

6.1 Can Kortek engrave metal?

Yes, the Kortek can engrave metal, especially when using a 10W laser module. It is effective on materials such as brass, aluminum, and stainless steel. Ensure the metal surface is not reflective before engraving.

Recommended settings for metal engraving:

• Titanium alloy: Power 100%, Speed 40%
• Stainless steel: Power 100%, Speed 70%

A graphic detailing recommended power and speed settings for engraving titanium alloy and stainless steel.

6.2 How to connect Kortek to PC software (Cutlabx)?

1. Connect the Kortek to your PC using a USB cable.
2. Install the corresponding driver according to your PC's operating system. Drivers for macOS and Windows are available on the SD card.
3. Open the Cutlabx software.
4. Select the correct COM number in the console. For Windows, this is typically CH341 COM under Port in Device Manager. For macOS, it should be Wchusbserial or a similar number.
5. Enter the home page and click on the beginning of the creation process.
6. Select the correct COM and connect.

Step-by-step instructions for connecting the Kortek engraver to Cutlabx PC software via USB, including driver installation and COM port selection.

6.3 How to connect Kortek to PC software (Lightburn)?

1. Connect the Kortek to your PC using a USB cable.
2. Install the corresponding driver according to your PC's operating system. Drivers for macOS and Windows are available on the SD card.
3. Open the Lightburn software.
4. Select the correct COM number in the console. For Windows, this is typically CH341 COM under Port in Device Manager. For macOS, it should be Wchusbserial or a similar number.
5. Click 'Devices', then 'Import' to add the file named 'Kortek Lightburn Firmware.lbdev'. This file can be found under the SD card file folder: Kortek_04_Software_GRBL - Lightburn Parameter.
6. If the status shows 'Ready', the connection is successful.

Step-by-step instructions for connecting the Kortek engraver to Lightburn PC software, including driver installation, COM port selection, and device import.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Genmitsu website or contact Genmitsu customer service directly. Keep your purchase receipt for warranty claims.