Furmax OD0565

Furmax OD0565 Height Adjustable Computer Desk User Manual

Model: OD0565

Introduction

Welcome to your new Furmax OD0565 Height Adjustable Computer Desk. This manual provides essential information for the safe assembly, efficient operation, and proper maintenance of your desk. Please read through these instructions carefully before use to ensure optimal performance and longevity of your product.

White Furmax height adjustable computer desk with two monitors, a laptop, and a phone on a wireless charger, showcasing its spacious glass top and integrated drawer.

Image: Furmax OD0565 Height Adjustable Computer Desk in a modern office setting.

Important Safety Information

To prevent injury and damage to your desk, please observe the following safety guidelines:

Package Contents

Please verify that all the following components are present in your package before proceeding with assembly:

Assembly Instructions

For a visual guide to assembly, please watch the official installation video below. Detailed steps are also provided.

Video: Step-by-step guide on how to assemble the Furmax height adjustable computer desk, detailing the connection of the crossbar, table legs, and tabletop.

  1. Step 1: Attach Crossbar to Table Legs. Secure the ends of the crossbar to the table legs using the provided screws (A) and Allen wrench (E). Ensure the iron tabs on the crossbar are facing outwards.
  2. Step 2: Secure Leg Base to Table Legs. Attach the leg bases (3) to the bottom of the table legs (1 and 2) using the provided screws (C) and Allen wrench (E). Note: The long side of the base should be on the same side as the motor.
  3. Step 3: Connect Left Crossbar. Secure the left crossbar (7) to the left table leg (2) using the provided screws (A) and Allen wrench (E). Repeat for the other side.
  4. Step 4: Insert Transmission Rod. Insert the transmission rod (4) into the hex hole and turn it clockwise until the left leg reaches its lowest position. Then, insert the other end of the transmission rod into the slot on the right leg and tighten the knob.
  5. Step 5: Secure Crossbar to Tabletop. Carefully place the tabletop (9) upside down. Secure the assembled crossbar to the tabletop using the provided screws (B) and Allen wrench (E).
  6. Step 6: Secure Drawer to Tabletop. Position the drawer (10) onto the designated area on the underside of the tabletop (9) and secure it with the provided screws (B) and Allen wrench (E).
  7. Step 7: Connect Power and Motor Plugs. Plug the power cord (5) and motor plug into the control panel. Remove the sticker from the back of the cable clips (F) and attach them to the underside of the desk to neatly gather and secure both cables.
  8. Step 8: Unfold Mobile Phone Support. Unfold the mobile phone support (11) and place it in the desired position on the desktop.

Operating Instructions

Your Furmax Height Adjustable Computer Desk features an intuitive control panel for easy height adjustments and convenient charging options.

Video: Demonstration of the key features of the Furmax glass standing desk, including its programmable height presets, USB charging ports, dual-zone drawer, and smooth writing glass surface.

Maintenance

Proper care and maintenance will help extend the life of your Furmax desk:

Troubleshooting

If you encounter any issues with your Furmax Height Adjustable Computer Desk, please refer to the following common problems and their solutions:

Specifications

BrandFurmax
Model NumberOD0565
Furniture FinishGlass, Wood
Maximum Weight Recommendation110 Pounds
Base TypeMetal
Minimum Height28 Inches
Maximum Height27.56 Inches (Note: There might be a slight discrepancy in provided data, generally adjustable desks have a wider range)
Number of Height Positions3 (Programmable Presets)
Storage OptionsBuilt-in drawers
Mounting TypeFreestanding
ColorWhite

Warranty and Support

Your Furmax OD0565 Height Adjustable Computer Desk comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions regarding coverage and duration.

For technical support, replacement parts, or warranty claims, please contact Furmax customer service through the retailer where you purchased the product or visit the official Furmax website for contact information.

Related Documents - OD0565

PreviewFurmax Electric Height Adjustable Standing Desk Instruction Manual
Comprehensive instruction manual for the Furmax Electric Height Adjustable Standing Desk, detailing assembly, operation, and features for home and office use. Includes parts list and step-by-step assembly guide.
PreviewDigital Control Panel for Electric Height Adjustable Desk User Guide
User guide for the Digital Control Panel for Electric Height Adjustable Desks, covering lifting, memory preset, desktop reset, child safety lock, anti-collision, overheat, and motor abnormal protection functions.
PreviewFurmax Bar Stool Assembly Instructions
Detailed assembly instructions for the Furmax Bar Stool with Armrest, featuring a modern PU leather design, swivel and adjustable hydraulic lift, X-large base, and square counter height seat. This guide covers the assembly process for a set of two black bar stools.
PreviewFurmax Electric Standing Desk Assembly Instructions
Step-by-step guide to assembling your Furmax electric height adjustable standing desk, including parts list and hardware.
PreviewFurmax Electric Height Adjustable Standing Desk Assembly Instructions
Comprehensive guide for assembling your Furmax electric height adjustable standing desk. Includes a detailed parts list, hardware specifications, and step-by-step instructions for a smooth setup.
PreviewFurmax Ergonomic Gaming Chair Installation and User Manual
Comprehensive installation guide, safety warnings, and parts list for the Furmax ergonomic gaming computer chair. Learn how to assemble your chair, understand its features, and ensure safe usage.