Furmax OD0565 Glass Standing Desk Instruction Manual

1. Introduction

Thank you for choosing the Furmax OD0565 Electric Adjustable Glass Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read it thoroughly before use and retain it for future reference.

Figure 1: Furmax Glass Standing Desk (White Glass, 48 Inch)

2. Safety Information

• Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Keep children and pets away from the desk during operation to prevent injury.
• Do not overload the desk. The maximum weight capacity is 110 lbs (50 kg).
• Keep hands and fingers clear of moving parts during height adjustment.
• Only use the provided power adapter. Disconnect power before cleaning or maintenance.
• Avoid placing liquids directly on the desk surface without coasters to prevent potential damage to electronics or the glass.
• Ensure the desk is placed on a level surface to maintain stability.

3. Package Contents

Verify that all parts are included in your package before beginning assembly:

• Desk Frame Components (Legs, Crossbars)
• Tempered Glass Desktop
• Control Panel with Digital Display
• Power Adapter and Cables
• 4-Zone Storage Drawer
• Assembly Hardware (Screws, Allen Wrenches)
• Cable Management Clips
• Mobile Phone Support

4. Assembly Instructions

Follow these steps to assemble your Furmax Glass Standing Desk. It is recommended to have two people for assembly.

4.1. Assembly Video Guide

Video 1: Detailed step-by-step installation guide for the Furmax Glass Standing Desk.

4.2. General Assembly Steps

1. Attach Crossbar to Table Legs: Secure the ends of the crossbar to the table legs using the provided hardware. Ensure the iron tabs on the crossbar are on the outside.
2. Secure Leg Base to Table Leg: Attach the leg bases to the table legs. The long side of the base should be on the same side as the motor.
3. Secure Left Crossbar: Secure the left crossbar to the left table leg. Repeat for the other side.
4. Insert Transmission Rod: Insert the transmission rod into the hex hole and turn it clockwise until the left leg reaches its lowest position. Insert the other end of the transmission rod into the slot on the leg and tighten the knob.
5. Secure Crossbar to Tabletop: Carefully place the tabletop upside down and secure the assembled crossbar and legs to the tabletop using the designated screws.
6. Secure Drawer to Tabletop: Attach the 4-zone storage drawer to the underside of the tabletop.
7. Connect Power and Motor Plugs: Plug the power cord and motor plug into the control panel. Use the provided cable clips to neatly gather and secure all cables.
8. Install Mobile Phone Support: Unfold the mobile phone support and place it in the desired position on the desk.

Figure 2: Desk Dimensions and Load Capacity (Max Load: 110 LBS)

5. Operating Instructions

Your Furmax Glass Standing Desk is designed for ease of use with its electric height adjustment and integrated features.

5.1. Height Adjustment and Presets

• Adjusting Height: Use the UP and DOWN arrow buttons on the control panel to smoothly adjust the desk height between 28.3 and 46.5 inches.
• Memory Presets: The desk features three programmable height presets (buttons 1, 2, 3). To save a preferred height, adjust the desk to the desired level, then press and hold one of the preset buttons until the display flashes or beeps, indicating the height is saved. To recall a saved height, simply press the corresponding preset button.

Figure 3: Multifunctional Control Panel

5.2. Desktop Digital Display

The current desk height is displayed directly on the tempered glass desktop. This integrated display shows the height in a clear, wood-grain effect, protected by the glass surface.

5.3. USB Charging Ports

The desk is equipped with both USB and Type-C charging ports, located on the control panel. These ports provide a total output of 10W, allowing you to charge up to two devices simultaneously.

5.4. 4-Zone Drawer Storage

Utilize the integrated 4-zone drawer to organize your office supplies and keep your workspace tidy. The partitioned design helps categorize items efficiently.

Figure 4: 4-Zone Storage Drawer

5.5. Tempered Glass Desktop

The ultra-white tempered glass desktop provides a smooth, durable, and scratch-resistant surface. It can also be used as a dry-erase board for notes and brainstorming.

Video 2: Overview of the Furmax Glass Standing Desk's key features, including height adjustment, charging ports, and glass desktop functionality.

6. Maintenance

• Cleaning the Glass Surface: Use a soft, damp cloth and a mild glass cleaner to clean the tempered glass desktop. Avoid abrasive cleaners or harsh chemicals that could scratch or damage the surface.
• Cleaning the Frame: Wipe the metal frame with a soft, dry cloth.
• Cable Management: Periodically check and reorganize cables to prevent tangles and ensure smooth operation of the desk's moving parts.
• Regular Inspection: Routinely check all screws and connections to ensure they are tight. Tighten if necessary.

7. Troubleshooting

If you encounter any issues with your Furmax Glass Standing Desk, refer to the following common troubleshooting tips:

• Desk Not Moving:
  • Check if the power cord is securely plugged into both the desk and the wall outlet.
  • Ensure all motor and control panel cables are properly connected.
  • If the desk has been overloaded, remove some weight and try again.
• Uneven Movement:
  • Verify that the desk is on a level surface.
  • Check for any obstructions under or around the desk legs.
  • Ensure the transmission rod is correctly inserted and tightened.
• Digital Display Not Working:
  • Confirm the desk is powered on.
  • If the issue persists, try unplugging the desk for 30 seconds and then plugging it back in to reset the system.
• USB/Type-C Ports Not Charging:
  • Ensure the desk is powered on.
  • Check if the charging cable is properly connected to both the device and the desk port.
  • Test with a different device or cable to rule out external issues.

If these steps do not resolve the issue, please contact Furmax customer support for further assistance.

8. Specifications

9. Warranty Information

This Furmax Glass Standing Desk comes with a Limited Warranty. Please refer to the warranty card included in your package or contact Furmax customer support for specific terms and conditions regarding coverage and duration.

10. Contact and Support

For any questions, technical support, or warranty claims, please contact Furmax customer service. You can typically find contact information on the product packaging, the official Furmax website, or through your point of purchase.

Please have your model number (OD0565) and purchase details ready when contacting support.