BLOKEES Transformers Devastator Defender Version Combining Accessory

Introduction

This instruction manual provides detailed guidance for assembling the BLOKEES Transformers Devastator Defender Version Combining Accessory Kit. This 28-piece kit is designed to combine with your existing Defender Version Series 01-03 construction vehicles (Scavenger, Bonecrusher, Hook, Long Haul, Scrapper, and Mixmaster) to form the complete Devastator robot figure. Please read all instructions carefully before beginning assembly.

Safety Information

• Recommended Age: This product is suitable for ages 8 and up.
• Small Parts: The kit contains small parts which may pose a choking hazard for children under 3 years of age. Keep out of reach of small children.
• Adult Supervision: Adult supervision is recommended during assembly, especially for younger users.
• Handling: Handle parts with care to avoid breakage. Do not apply excessive force during assembly or posing.

Package Contents

Verify that all components are present before starting assembly:

• Devastator Combining Accessory Kit (28 pieces)
• Instruction Manual (this document)
• Exclusive Collector's Card

If any parts are missing or damaged, please contact customer support.

Setup and Assembly

This kit enhances your existing Defender Version construction vehicles to form the mighty Devastator. Ensure you have all six individual vehicles (Scavenger, Bonecrusher, Hook, Long Haul, Scrapper, Mixmaster) ready for combination.

Image 1: The BLOKEES Devastator Combining Accessory Kit packaging alongside the fully assembled Devastator robot.

1. Prepare Individual Vehicles: Transform each of your six Defender Version construction vehicles (Scavenger, Bonecrusher, Hook, Long Haul, Scrapper, Mixmaster) into their robot modes, or their designated limb/torso modes as per their individual instructions for combination.
2. Identify Combining Parts: The 28-piece accessory kit includes various connectors, chest plates, head, hands, and feet designed to integrate with the individual vehicles. Refer to the diagrams in the included physical instruction manual for specific part identification.
3. Assemble Torso Components: Attach the central chest and back plate accessories to the designated core vehicle(s) (typically Long Haul and Hook). Ensure secure connections.
4. Form Arms: Connect the arm extension and hand accessories to the vehicles designated as arms (typically Scavenger and Bonecrusher). The kit provides specific hand molds for each arm.
5. Form Legs: Attach the leg extension and foot accessories to the vehicles designated as legs (typically Scrapper and Mixmaster). The feet are designed to provide stability for the combined form.
6. Attach Head: Securely attach the Devastator head accessory to the combined torso section.
7. Final Connections: Carefully combine all the enhanced individual vehicles using the kit's connectors to form the complete Devastator figure. Ensure all joints are firmly connected.

Image 2: The BLOKEES Devastator Defender Version fully assembled, showcasing its combined form.

Operating and Posing

Once assembled, your Devastator figure is ready for display and imaginative play. The combined form retains articulation from the individual vehicles and the added accessory parts. Carefully adjust joints to achieve desired poses. Avoid forcing joints beyond their natural range of motion to prevent damage.

Maintenance and Care

• Cleaning: Use a soft, dry cloth to gently wipe dust from the figure. For stubborn dirt, a slightly damp cloth can be used, but avoid harsh chemicals or abrasive cleaners.
• Storage: Store the figure away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
• Disassembly: If disassembling, do so carefully by reversing the assembly steps. Do not pull parts apart forcefully.

Troubleshooting

• Parts Not Fitting: Ensure you are using the correct accessory part for the corresponding vehicle. Refer to the diagrams in the physical instruction manual. Apply gentle, even pressure.
• Figure Feels Fragile: The combined figure, due to its intricate nature, may have some delicate joints. Avoid rough handling. If a joint feels loose, ensure it is fully seated. If a part breaks, adhesive designed for plastic models may be used for repair, but this may affect articulation.
• Stability Issues: Ensure the feet are properly attached and positioned flat on the surface. Adjust leg poses to distribute weight evenly for better balance.

Specifications

Warranty and Support

This BLOKEES product is manufactured to high-quality standards. For information regarding warranty coverage or to obtain support for missing or damaged parts, please refer to the contact information provided on the product packaging or visit the official BLOKEES website. Keep your proof of purchase for warranty claims.