1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your AECOJOY SS16334GY Outdoor Storage Cabinet. Please read this manual thoroughly before beginning assembly or use to ensure proper installation and safe operation. Retain this manual for future reference.

Figure 1.1: AECOJOY Outdoor Storage Cabinet with various items stored inside.
2. Safety Information
Observe the following safety precautions during assembly and use of the storage cabinet:
- Always wear appropriate personal protective equipment, such as gloves, during assembly to prevent injury from sharp edges.
- Ensure all parts are securely fastened according to the instructions. Loose components can lead to instability.
- Do not overload the shelves. Each shelf has a maximum weight capacity of 150 lbs (68 kg).
- Place the cabinet on a level, stable surface to prevent tipping.
- Keep children and pets away from the assembly area.
- Periodically inspect the cabinet for any signs of wear, damage, or loose fasteners.
3. Package Contents
Before beginning assembly, verify that all components listed in the included parts diagram are present and undamaged. The package typically includes:
- Metal panels for walls, roof, and door.
- Adjustable shelves (3 tiers).
- Hardware kit (screws, washers, nuts, hinges, lock mechanism).
- Assembly manual.
- Protective gloves (may be included).
If any parts are missing or damaged, contact AECOJOY customer support immediately.
4. Assembly Instructions
Assembly of the AECOJOY Outdoor Storage Cabinet requires careful attention to detail. It is recommended to have a clear, spacious area for assembly and consider having a second person assist.
- Preparation: Unpack all components and lay them out. Identify each part using the provided assembly manual's diagram. Note that metal panels may have a protective film that needs to be removed during assembly.
- Base Assembly: Begin by assembling the base frame according to the manual. Ensure all connections are firm.
- Wall Panel Installation: Attach the side and back panels to the base. Pay close attention to the orientation of each panel to ensure proper alignment for the roof and door.
- Roof Installation: Secure the sloped roof panels. The design is intended to prevent water accumulation.
- Door Assembly and Attachment: Assemble the door and attach it to the cabinet using the provided hinges. Ensure the door opens and closes smoothly and the lock mechanism aligns correctly.
- Shelf Installation: Install the adjustable shelves. Each shelf can be positioned at various heights, with a minimum adjustment increment of 5.9 inches (15 cm). Refer to the manual for specific shelf support placement.

Figure 4.1: Cabinet dimensions and adjustable shelf feature.
For detailed step-by-step visual guidance, refer to the comprehensive manual included with your product. AECOJOY's technical team is available for remote assistance if needed.
5. Operating Instructions
5.1. Adjusting Shelves
The cabinet features three adjustable shelves. To adjust a shelf:
- Empty the shelf of all contents.
- Carefully lift the shelf and disengage it from its current support brackets.
- Reposition the support brackets to the desired height. Each shelf height can be adjusted in 5.9-inch increments.
- Place the shelf back onto the brackets, ensuring it is level and securely seated.

Figure 5.1: Examples of adjustable shelf configurations for various storage needs.
5.2. Using the Lockable Door
The cabinet is equipped with a lockable door for securing contents. To lock the door, ensure it is fully closed and engage the latch mechanism. A padlock (not included) can be used with the integrated hasp for added security.
6. Maintenance
Regular maintenance will extend the lifespan of your AECOJOY Outdoor Storage Cabinet.
- Cleaning: Clean the exterior surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners that could damage the rust-resistant coating.
- Inspection: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
- Weather Protection: The cabinet's high-quality galvanized metal and rust-resistant coating provide protection against corrosion and fading. The sloped roof design helps prevent water buildup. Ensure the cabinet is placed on a level surface to maintain proper drainage and prevent water ingress.
- Door Mechanism: Lubricate hinges and the lock mechanism annually with a silicone-based lubricant to ensure smooth operation.

Figure 6.1: Cabinet features for indoor and outdoor durability.
7. Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty aligning panels during assembly. | Panels are not oriented correctly or fasteners are overtightened prematurely. | Review the assembly manual for correct panel orientation. Loosen fasteners slightly to allow for adjustment, then re-tighten once aligned. |
| Door does not close or lock properly. | Door hinges are misaligned or the cabinet is not on a level surface. | Check hinge alignment and adjust if necessary. Ensure the cabinet is on a perfectly level surface. |
| Water ingress inside the cabinet. | Improper assembly, gaps at the base, or cabinet not level. | Verify all seams are properly sealed and fasteners are tight. Ensure the cabinet is on a level surface to allow proper water runoff from the sloped roof. Consider sealing any gaps at the base if necessary. |
| Shelves are unstable. | Shelves not properly seated on support brackets or brackets are loose. | Ensure shelves are fully engaged with all four support brackets. Check that support brackets are securely fastened to the cabinet walls. |
8. Specifications
- Model: SS16334GY
- Brand: AECOJOY
- Material: Metal (Galvanized Steel)
- Color: Gray
- Product Dimensions (D x W x H): 21.5" x 34" x 70" (54.6 cm x 86.4 cm x 177.8 cm)
- Item Weight: 52.7 Pounds (23.9 kg)
- Door Width: 30 Inches (76.2 cm)
- Door Height: 54 Inches (137.2 cm)
- Shelf Capacity: 150 lbs (68 kg) per shelf
- Water Resistance Level: Waterproof
- Assembly Required: Yes
9. Warranty and Customer Support
AECOJOY is committed to providing high-quality products and excellent customer service. If you encounter any issues, have questions, or require assistance with missing parts, please contact our professional customer support team.
- Contact: Refer to the contact information provided in your product packaging or on the official AECOJOY website.
- Resolution: Our team aims to provide a satisfactory resolution within 24 hours for any product-related concerns.
Please have your model number (SS16334GY) and purchase details ready when contacting support.





