1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your EmpireTech Panoramic & PTZ Wired IP POE Camera (Model: PTZ3E10X-T180). This advanced surveillance camera features an 8MP+4MP dual-lens system, 10x optical zoom, Starlight technology, Smart Dual Light, 180° wide-angle panoramic view, and Intelligent Video System (IVS) capabilities.
Key Features:
- Panoramic View: Outputs a 180° wide-angle splicing image for comprehensive coverage.
- High-Resolution Detail: Features a 1/2.8" 4 Megapixel STARVIS CMOS sensor.
- Optical Zoom: Equipped with 10x optical zoom for detailed distant viewing.
- Starlight Technology: Provides superior low-light performance for clear images in challenging conditions.
- High Frame Rate: Achieves a maximum of 25/30 frames per second at 8 Megapixels.
- Smart Dual Light: Intelligent lighting system for enhanced night vision.
- Intelligent Video System (IVS): Supports advanced analytics like Tripwire and Intrusion detection.
- Two-Way Talk: Built-in microphone and speaker for audio communication.
- Power over Ethernet (PoE): Simplifies installation by providing power and data over a single cable.
Figure 1: EmpireTech Panoramic & PTZ Wired IP POE Camera (Model: PTZ3E10X-T180)
2. Setup and Installation
2.1 Unboxing and Components
Upon unboxing, ensure all components are present. The package typically includes the camera unit, a mounting plate, screws, and a waterproof connector for the Ethernet cable. The camera is designed for Power over Ethernet (PoE), simplifying wiring by delivering both power and data through a single Ethernet cable.
Figure 2: Side view of the camera showing connection points.
2.2 Physical Installation
- Mounting Location: Choose a suitable outdoor location that provides the desired 180° panoramic view and is within range of your PoE network.
- Secure Mounting: Use the provided mounting plate and screws to securely attach the camera to a wall or ceiling. Ensure the mounting surface is strong enough to support the camera's weight.
- Cable Connection: Connect a standard Ethernet cable from your PoE switch/NVR to the camera's Ethernet port. Use the waterproof connector to protect the connection from environmental elements.
2.3 Initial Configuration (EPTZ Function)
To fully utilize the camera's EPTZ (Electronic Pan Tilt Zoom) and IVS features, initial configuration via the camera's web interface is required. The following video demonstrates how to set up the EPTZ function, which involves configuring IVS rules.
Video 1: Guide on setting up the EPTZ function for EmpireTech IPC-Color4K-T180/B180 cameras. This video covers configuring IVS rules and enabling EPTZ linkage for enhanced tracking.
- Access Web Interface: Log into the camera's web interface using its IP address.
- Smart Plan Setup: Navigate to the AI function and set up a "Smart Plan," typically a "General Mode" for 24/7 operation.
- IVS Rule Configuration: Enable IVS and add rules such as "Tripwire" and "Intrusion." Adjust sensitivity and define the detection areas (tripwires or intrusion zones) on the live view.
- EPTZ Linkage: Go to the PTZ module. Enable "Linkage Track" and select your preferred display mode (e.g., single view with region of interest or multi-view). Adjust the tracking duration as needed.
3. Operating Instructions
3.1 Panoramic and PTZ Control
The camera provides a 180° panoramic view, allowing you to monitor a wide area. The PTZ (Pan-Tilt-Zoom) functionality enables you to remotely adjust the camera's viewing angle and zoom level. The EPTZ feature, once configured, allows for digital zooming on subjects within the panoramic view without physical camera movement, providing detailed close-ups of detected events.
3.2 Intelligent Video System (IVS)
The IVS features enhance surveillance by providing intelligent detection capabilities:
- Tripwire: Triggers an alarm when an object crosses a predefined virtual line.
- Intrusion: Triggers an alarm when an object enters or exits a predefined virtual area.
- Face Detection: Identifies human faces within the camera's field of view.
These rules can be configured to detect humans and/or motor vehicles, providing tailored alerts.
3.3 Smart Dual Light and Starlight Technology
The camera integrates Starlight technology for exceptional low-light performance, delivering full-color images even in near-dark conditions. The Smart Dual Light system intelligently activates warm lights to provide full-time color imaging when ambient light is insufficient, ensuring clear visibility day and night.
Video 2: Demonstration of the IPC-Color4K-T camera's night video capabilities, showcasing its performance in low-light conditions.
Video 3: Example footage of night sky aurora captured with the IPC-Color4K-T camera, highlighting its Starlight technology.
3.4 Two-Way Talk
Utilize the built-in microphone and speaker for two-way audio communication. This feature is useful for deterring intruders or communicating with visitors.
4. Maintenance
- Regular Cleaning: Periodically clean the camera lens and housing with a soft, damp cloth to ensure optimal image clarity. Avoid abrasive cleaners.
- Firmware Updates: Check the manufacturer's website regularly for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance, security, and access to new features.
- Cable Inspection: Inspect all cables and connections for any signs of wear, damage, or corrosion, especially in outdoor environments.
5. Troubleshooting
- No Power/No Image:
- Verify the PoE connection to your switch/NVR.
- Ensure your PoE switch/NVR provides sufficient power (e.g., 25W+ for PTZ cameras).
- Check the Ethernet cable for damage.
- Poor Image Quality:
- Clean the camera lens.
- Check network bandwidth and connection stability.
- Adjust image settings (brightness, contrast, etc.) in the web interface.
- IVS/EPTZ Not Working:
- Ensure IVS and EPTZ linkage are enabled and correctly configured in the web interface (refer to Section 2.3).
- Verify that detection zones are properly drawn and sensitivity is adjusted.
6. Specifications
| Feature | Value |
|---|---|
| Brand Name | EmpireTech |
| Item Weight | 4.78 pounds |
| Product Dimensions | 7.15 x 9.4 x 5.52 inches |
| Item model number | PTZ3E10X-T180 |
| Special Features | Panoramic & PTZ Camera, Smart Dual Light |
| Photo Sensor Technology | CMOS |
| Video Capture Resolution | 4K |
| Connectivity Technology | Wired |
| Optical Zoom | 10 x |
| Camcorder type | Video Camera |
| Model Name | IP PTZ POE Camera |
7. Warranty Information
This EmpireTech product is covered by a manufacturer's warranty. Please refer to the product packaging or the official EmpireTech website for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
8. Customer Support
For technical assistance, troubleshooting, or any inquiries regarding your EmpireTech camera, please contact EmpireTech customer support. Contact information can typically be found on the product packaging or the official EmpireTech website.
