1. Introduction
Thank you for choosing the JETBeam RRT0 PRO Camping Flashlight. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.
2. Package Contents
- JETBeam RRT0 PRO Flashlight
- Rechargeable 16340 (RCR123) Battery (850mAh)
- USB-C Charging Cable
3. Product Overview
The JETBeam RRT0 PRO is a compact and powerful flashlight designed for everyday carry and camping. It features a unique magnetic control ring for seamless mode switching and multiple lighting options.
Figure 1: JETBeam RRT0 PRO Flashlight with its integrated clip.
Key Features:
- LEDs: Equipped with 3 high-brightness LEDs and 1 tri-color LED (Red, Green, Blue, Red&Blue Police Flash).
- Control: Magnetic control ring for intuitive operation.
- Material: Aviation-grade aluminum alloy with Military-grade Class 3 hard anodizing.
- Clip: Stainless steel, deep-carry, physically locked clip for secure attachment.
- Magnetic Tail: Allows for hands-free operation by attaching to metal surfaces.
- Tritium Slots: Eight 6mm slots for customization (tritium vials not included).
4. Setup
4.1 Battery Installation
- Unscrew the head of the flashlight counter-clockwise.
- Insert the included 16340 (RCR123) rechargeable battery with the positive (+) end facing towards the head of the flashlight.
- Screw the head back on clockwise until secure.
4.2 Charging the Battery
The RRT0 PRO uses a rechargeable 16340 battery with a built-in USB-C charging port. The flashlight itself does not have an integrated charging port.
- Remove the battery from the flashlight as described in section 4.1.
- Locate the USB-C port on the side of the battery.
- Connect the included USB-C charging cable to the battery and a compatible USB power source.
- The battery's indicator light will show charging status (e.g., red for charging, green for full).
5. Operating Instructions
The RRT0 PRO features a magnetic control ring for easy and precise mode selection.
Figure 2: Magnetic control ring for selecting various lighting modes.
5.1 Turning On/Off and White Light Modes
- To turn the flashlight OFF, rotate the magnetic control ring all the way to the left (counter-clockwise).
- Rotate the control ring clockwise from the OFF position to cycle through the white light modes: Low → Medium → High.
- The flashlight has mode memory and will return to the last used white light mode when turned on again.
5.2 RGB and Special Modes
Continue rotating the control ring clockwise past the High white light mode to access the special lighting options:
- Red Light: Ideal for astronomical observation or wildlife watching, preserving night vision.
- Green Light: Useful for map reading or night searches.
- Blue Light: Can be used for refrigerant leak detection or anti-counterfeiting marking.
- Red & Blue Police Flash: For emergency signaling or attracting attention.
Figure 3: Various color light sources available on the RRT0 PRO.
6. Maintenance
6.1 General Care
- Keep the flashlight clean and dry. Wipe with a soft cloth as needed.
- Avoid dropping the flashlight from excessive heights, though it is rated for 1.5-meter drop resistance.
- Ensure the head is screwed on tightly to maintain its IPX-8 waterproof rating.
6.2 Battery Care
- Charge the battery regularly to prolong its lifespan.
- Store the battery in a cool, dry place when not in use for extended periods.
- Avoid over-discharging or over-charging the battery. The included battery has built-in over-charge and over-discharge protection.
7. Troubleshooting
7.1 Flashlight Not Turning On or Flickering
- Check Battery: Ensure the battery is inserted correctly with the positive (+) end towards the head.
- Charge Battery: The battery may be depleted. Remove and charge the battery using the provided USB-C cable.
- Tighten Connections: Ensure the flashlight head is screwed on tightly to establish proper electrical contact.
7.2 Overheat Protection
The RRT0 PRO features patented temperature control technology. If the flashlight becomes too hot during prolonged use on high modes, it will automatically reduce its output to prevent damage. This is normal operation. Allow the flashlight to cool down before resuming high-output use.
8. Specifications
| Feature | Specification |
|---|---|
| Model | RRT0 PRO |
| LEDs | 3 High-Brightness LEDs + 1 Tri-Color LED (RGB) |
| Maximum Output | 1680 Lumens |
| Maximum Range | 200 meters |
| Maximum Runtime | 18.8 hours (on lowest mode) |
| Material | Aviation-grade Aluminum Alloy, Military-grade Class 3 Hard Anodizing |
| Waterproof Rating | IPX-8 (submersible up to 2 meters) |
| Drop Resistance | 1.5 meters |
| Dimensions (Head x Body x Length) | φ26.4mm x φ24.0mm x 74.0mm |
| Net Weight (including battery and clip) | 66.5g |
| Battery Type | Rechargeable 16340 (RCR123) Lithium-ion (850mAh) |
| Charging | USB-C port on battery |
9. Warranty and Support
JETBeam offers a 5-year free warranty for the RRT0 PRO flashlight. This covers any manufacturing defects or malfunctions under normal use. Following the initial 5-year period, a limited lifetime warranty is provided for continued support. For warranty claims or technical assistance, please contact JETBeam customer support with your purchase details.
