Introduction
The WOLFANG WT08 is a 4G LTE solar-powered trail camera designed for outdoor security and wildlife monitoring. It features 2.5K HD video, 355° pan and 90° tilt capabilities, two-way audio, and advanced night vision modes. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your WT08 camera.
Setup Guide
1. Unboxing and Initial Preparation
Ensure all components are present: WOLFANG WT08 camera, solar panel, mounting bracket, screws, 32GB SD card, and SIM card.
2. Inserting SIM and SD Cards
- Locate the SIM and SD card slots on the camera, usually protected by a rubber seal.
- Carefully insert the provided 32GB SD card into the SD card slot.
- Insert the provided 4G SIM card into the SIM card slot. Ensure proper orientation as indicated on the device.
Image: Step-by-step guide for inserting SIM and SD cards and app setup.
3. App Download and Camera Pairing
- Download the UBox app from your smartphone's app store (iOS or Android).
- Create a free account within the UBox app.
- Power on the camera.
- In the UBox app, follow the instructions to add a new device. This typically involves scanning a QR code located on the camera.
- Once paired, the camera will connect to the strongest available 4G network.
4. Mounting the Camera
The camera can be mounted using the provided wall mount or a tree strap. Choose a location with optimal sunlight exposure for the solar panel and a clear view of the area you wish to monitor.
- Wall Mount: Use the included screws and bracket to securely attach the camera to a wall or sturdy surface.
- Tree Strap: Wrap the strap around a tree trunk and secure the camera to it.
5. Connecting the Solar Panel
Connect the solar panel cable to the camera's charging port. Position the solar panel to receive maximum direct sunlight throughout the day for continuous power.
Image: WOLFANG 4G LTE camera with solar panel in a rural environment, demonstrating 4G connectivity.
Operating Instructions
1. Powering On/Off
Press and hold the power button to turn the camera on or off. The camera will indicate its status via LED lights.
2. UBox App Features
- Live View: Access real-time 2.5K HD video stream from your camera.
- Pan/Tilt/Zoom: Remotely control the camera's 355° horizontal pan and 90° vertical tilt. Use 4x digital zoom to focus on details.
Image: Camera's 360° pan and tilt functionality, showing a wide field of view.
- Recording & Playback: Manually record video or review recorded footage stored on the SD card or cloud.
- Two-Way Audio: Use the built-in microphone and speaker to communicate remotely.
- Motion Detection: Configure PIR (Passive Infrared) motion detection settings, including sensitivity and detection interval, to receive real-time alerts.
Image: Night vision motion detection with spotlight and smartphone notification.
3. Night Vision Modes
The WT08 offers two night vision options:
- Infrared Night Vision: Provides clear black-and-white video in low-light conditions without visible LEDs.
- Color Night Vision: Activates 4 white LEDs to capture full-color video at night. This can also serve as a deterrent.
4. Data Plan Management
The camera operates on a 4G LTE network. The included SIM card comes with a 300MB trial data. To continue service, purchase additional data plans through the UBox app. The camera is compatible with various mobile network operators.
Image: Overview of 4G data plan options.
Maintenance
1. Battery and Solar Charging
The WT08 features a built-in high-capacity battery continuously charged by the 3W solar panel. Ensure the solar panel is clean and positioned to receive adequate sunlight for optimal performance.
2. Cleaning
Periodically clean the camera lens and solar panel with a soft, damp cloth to remove dust, dirt, or debris that may obstruct vision or reduce charging efficiency. Do not use harsh chemicals.
3. Weather Resistance
The camera is rated IP66 for weather resistance, protecting it from dust and strong jets of water. While designed for outdoor use, avoid submerging the device in water.
Image: Camera with solar panel demonstrating IP66 waterproof rating in rainy weather.
4. SD Card Management
Regularly check the SD card storage. If the card is full, older recordings may be overwritten, or new recordings may not be saved. Format the SD card periodically through the app to maintain optimal performance.
Troubleshooting
- No 4G Signal: Ensure the SIM card is correctly inserted and activated. Check the camera's location for network coverage. Try restarting the camera.
- App Connection Issues: Verify your smartphone has a stable internet connection. Ensure the UBox app is updated to the latest version. Restart both the camera and your phone.
- Battery Not Charging: Confirm the solar panel is clean and receiving direct sunlight. Check the connection between the solar panel and the camera.
- Motion Detection Not Working: Adjust PIR sensitivity settings in the UBox app. Ensure there are no obstructions in the camera's field of view.
- Poor Video Quality: Ensure the camera lens is clean. Check network signal strength, as poor signal can affect live stream quality.
For further assistance, refer to the support section.
Specifications
| Brand | WOLFANG |
| Model Name | WT08 |
| Recommended Use | Outdoor Security |
| Connectivity Protocol | Cellular (4G LTE) |
| Video Recording Resolution | 2.5K |
| Special Features | Two-way audio, Night Vision (Infrared & Color), Pan/Tilt/Zoom, PIR Motion Detection |
| Mounting Type | Wall Mount |
| Power Source | Solar-powered with built-in battery |
| Weather Resistance | IP66 |
| Item Dimensions | 11 x 13.8 x 14.8 cm |
| Included Components | 2.5K Solar Trail Camera |
| UPC | 850067892328 |
Warranty and Support
For any questions or technical assistance, please contact WOLFANG customer support:
- Email: support.vc@wolfang.co
- Please include your product model (WT08) and a detailed description of your issue for faster service.
Information regarding specific warranty terms and conditions can be found on the official WOLFANG website or by contacting customer support directly.