Fieety DSV103 Cordless Stick Vacuum Cleaner User Manual

1. Important Safety Instructions

Please read all instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This appliance is for household use only. Do not use outdoors or on wet surfaces.
• Do not allow children to operate the vacuum cleaner. Close supervision is necessary when used near children.
• Do not pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without the dust cup and filters properly installed.
• Turn off the appliance before making any adjustments, changing accessories, or storing.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.

2. Package Contents

Verify that all items are present in your package:

• Cordless Vacuum Cleaner (Main Motor Unit)
• 2-in-1 Brush
• Long Crevice Nozzle
• Cleaning Brush Tool
• Wall Mount Plate
• Charger
• Replaceable HEPA Filter
• Hardware Bag
• User Manual (this document)

Figure 2.1: Overview of the Fieety DSV103 Cordless Vacuum Cleaner and its accessories.

3. Setup and Assembly

3.1 Assembling the Main Unit

1. Attach the Dust Cup: Align the dust cup with the main motor unit and push until it clicks into place.
2. Insert Filters: Ensure the stainless steel filter, HEPA filter, and sponge filter are correctly placed inside the dust cup.

3.2 Attaching the Extension Tube and Floor Brush

1. Connect Extension Tube: Insert the orange extension tube into the main motor unit until it locks securely.
2. Attach Floor Brush: Connect the motorized floor brush head to the other end of the extension tube. Ensure it clicks into place.

3.3 Charging the Battery

The Fieety DSV103 features a removable battery. For initial use, fully charge the battery. A full charge provides up to 60 minutes of runtime in Eco mode.

• Connect the charger to the battery pack or directly to the main unit while mounted on the wall.
• The LED display will indicate charging status.
• Charging typically takes approximately 4 hours.

Figure 3.1: The removable battery provides extended runtime for comprehensive cleaning.

4. Operating Instructions

4.1 Powering On and Adjusting Suction

Press the power button to turn on the vacuum. The LED touch display allows you to monitor and adjust settings.

• LED Touch Display: Provides real-time information on battery level, suction mode, and alerts for brush blockages or a full dust cup.
• Suction Modes:
  • Eco Mode: Up to 60 minutes runtime, suitable for light cleaning on hard floors.
  • Mid Mode: Approximately 30 minutes runtime, for general cleaning tasks.
  • Max Mode: Approximately 20 minutes runtime, for deep cleaning carpets or stubborn dirt.
• Touch the suction adjustment icon on the LED display to cycle through the modes.

Figure 4.1: The smart LED touch display provides essential operational information and allows for easy mode selection.

4.2 Using Attachments

The vacuum comes with various attachments for different cleaning needs:

• Motorized Floor Brush: Ideal for both hard floors and carpets. Features LED lights to illuminate dust and debris.
• 2-in-1 Brush: Can be used as a brush or a wide nozzle for upholstery, curtains, or car interiors.
• Long Crevice Nozzle: Perfect for reaching tight spaces, corners, and crevices.

Figure 4.2: The flexible floor brush head allows for deep cleaning under furniture and in hard-to-reach areas.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Fieety DSV103 vacuum cleaner.

5.1 Emptying the Dust Cup

The 1.5L dust cup is designed for one-touch emptying to minimize contact with dirt.

1. Hold the main unit over a trash bin.
2. Press the dust cup release button (usually red) to open the bottom flap and empty the contents.
3. Close the flap securely after emptying.

Figure 5.1: The 1.5L dust cup can be emptied with a single touch for convenience.

5.2 Cleaning the Filters

The 7-layer filtration system includes a stainless steel filter, HEPA filter, and sponge filter. Clean these regularly to maintain suction power and air quality.

1. Remove the dust cup from the main unit.
2. Twist and pull out the internal filter components (stainless steel, HEPA, sponge).
3. Tap off loose dirt from the filters. For thorough cleaning, rinse the filters under running water.
4. Allow all filter components to air dry completely for at least 24 hours before reassembling. Do not use the vacuum with wet filters.

5.3 Cleaning the Brush Roll

Periodically check the motorized floor brush for tangled hair or debris. Remove any obstructions to ensure effective cleaning.

• Turn off the vacuum and detach the floor brush.
• Use the provided cleaning tool or scissors to cut and remove any hair or fibers wrapped around the brush roll.
• Reinstall the brush roll securely.

6. Troubleshooting

Figure 6.1: The LED display provides alerts for exceptions such as brush blockages or a full dust cup.

7. Specifications

8. Warranty and Support

Fieety provides a 3-year service for this product. If the vacuum cleaner battery is damaged or the vacuum cleaner does not work as expected, please contact our customer support for assistance.

For further support or inquiries, please visit the official Fieety store or contact our customer service team.

Fieety Store: https://www.amazon.com/stores/Fieety/page/39CD9E7D-8A24-4BBD-B967-009EAB6146D1