1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Reolink RLN8-410 Network Video Recorder (NVR) and the Reolink RLA-RM1 NVR Mounting Bracket. The RLN8-410 NVR is designed to manage and record video footage from up to 8 Reolink IP cameras, offering 24/7 surveillance capabilities. The RLA-RM1 bracket provides flexible mounting solutions for your NVR, suitable for various environments.
1.1 Package Contents
- Reolink RLN8-410 NVR with 2TB HDD
- Reolink RLA-RM1 NVR Mounting Bracket
- Power Adapter for NVR
- USB Mouse
- Ethernet Cable
- HDMI Cable
- Mounting Screws and Anchors for Bracket
- Quick Start Guide
2. Safety Information
- Ensure the NVR is placed in a well-ventilated area to prevent overheating.
- Use only the provided power adapter to avoid damage to the device.
- Keep the NVR and bracket away from water, moisture, and extreme temperatures.
- Do not attempt to disassemble or repair the NVR or bracket yourself. Contact Reolink support for assistance.
- Ensure all cables are securely connected to prevent accidental disconnections.
- When mounting the bracket, ensure the mounting surface can support the weight of the NVR and bracket.
3. Product Components
3.1 Reolink RLN8-410 NVR
Figure 1: Front view of the Reolink RLN8-410 NVR. This image displays the front panel of the NVR, featuring a USB port for mouse or external storage, and LED indicators for power (PWR) and hard disk drive activity (HDD).
Figure 2: Dimensions of the Reolink RLN8-410 NVR. The NVR measures approximately 10.2 inches in width, 9.05 inches in depth, and 1.6 inches in height, with a weight of 4.4 lbs.
Figure 3: Rear panel ports of the Reolink RLN8-410 NVR. The rear panel includes 8 PoE (Power over Ethernet) ports for camera connections, a LAN port for network connectivity, an eSATA port for external HDD expansion, HDMI and VGA outputs for monitor connection, and USB ports.
3.2 Reolink RLA-RM1 NVR Mounting Bracket
Figure 4: Reolink RLA-RM1 NVR Mounting Bracket components. This image shows the bracket disassembled, highlighting its main parts before assembly.
Figure 5: Diagram of Reolink RLA-RM1 NVR Mounting Bracket components with labels. Key components include: 1. Left Side Bracket, 2. Right Side Bracket, 3. Cage Nut, 4. Rack Hole, 5. Reolink Logo, 6. Mounting Plate, 7. Ventilation Hole, 8. Hole A, 9. Hole B (for RLN16-410, RLN36), 10. Hole C (for RLN8-410, RLN12W).
4. Setup
4.1 NVR Initial Setup
- Connect Monitor: Connect the NVR to a monitor using an HDMI or VGA cable.
- Connect Mouse: Plug the USB mouse into one of the NVR's USB ports.
- Connect Network: Connect the NVR's LAN port to your router using an Ethernet cable.
- Connect Cameras: Connect your Reolink IP cameras to the NVR's PoE ports.
- Power On: Connect the power adapter to the NVR and plug it into a power outlet. The NVR will power on automatically.
- Initial Configuration: Follow the on-screen prompts to set up the NVR, including creating a password and configuring network settings.
4.2 RLA-RM1 Bracket Installation
The RLA-RM1 bracket offers flexible mounting options, including wall mounting and rack mounting.
Figure 6: Examples of flexible mounting options for the Reolink NVR bracket. The bracket can be mounted on a wall or integrated into a server rack, providing versatile placement for the NVR.
4.2.1 Attaching NVR to Bracket
- Align the NVR with the mounting plate (Component 6 in Figure 5).
- Secure the NVR to the mounting plate using the appropriate screws. For RLN8-410, use the holes labeled 'C' (Component 10 in Figure 5).
- Attach the Left Side Bracket (Component 1) and Right Side Bracket (Component 2) to the mounting plate and NVR, ensuring proper alignment with the ventilation holes (Component 7).
- Tighten all screws to ensure the NVR is securely fastened to the bracket.
4.2.2 Mounting the Bracket
Choose your desired mounting method:
Wall Mounting:
- Select a suitable wall location that can support the weight of the NVR and bracket.
- Mark the drilling points on the wall using the bracket's mounting holes as a template.
- Drill pilot holes and insert wall anchors if necessary.
- Secure the bracket to the wall using the provided screws.
Rack Mounting:
- Align the rack holes (Component 4 in Figure 5) on the bracket with the mounting rails of your server rack.
- Insert cage nuts (Component 3 in Figure 5) into the rack rails if required.
- Secure the bracket to the rack using appropriate rack screws.
5. Operation
5.1 NVR Interface Navigation
Use the connected USB mouse to navigate the NVR's graphical user interface (GUI) on the monitor. The interface allows you to view live camera feeds, play back recorded footage, configure settings, and manage connected devices.
5.2 Recording Options
- 24/7 Continuous Recording: The NVR is pre-configured to record continuously to the built-in 2TB HDD.
- Motion-Triggered Recording: Configure cameras to record only when motion is detected, saving storage space.
- Scheduled Recording: Set specific times for recording based on your surveillance needs.
5.3 Remote Access
Access your NVR and cameras remotely using the Reolink App on your mobile device (iOS/Android) or the Reolink Client software on your computer (Windows/Mac).
Figure 7: Remote access to Reolink NVR via mobile app and desktop client. This image illustrates how users can view live feeds and manage their NVR from various devices, including smartphones, tablets, and computers.
5.3.1 Reolink App/Client Features
- Live View: Monitor all connected cameras in real-time.
- Playback: Review recorded footage from any time.
- Notifications: Receive instant alerts for person/vehicle/animal detection, siren activation, push notifications, and email alerts.
- Two-Way Audio: Communicate through cameras that support two-way audio (if applicable).
5.4 Storage Management
The NVR comes with a pre-installed 2TB HDD. You can expand storage capacity by adding an external HDD via the eSATA port (up to an additional 8TB).
6. Maintenance
- Cleaning: Periodically clean the NVR's exterior with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation holes are free from dust and obstructions.
- Firmware Updates: Regularly check for and install firmware updates from the Reolink official website or through the NVR's system settings to ensure optimal performance and security.
- HDD Health Check: Monitor the health of the hard disk drive through the NVR's system settings. Back up important footage regularly.
- Environmental Conditions: Ensure the NVR operates within its specified temperature and humidity ranges.
7. Troubleshooting
7.1 No Video Output on Monitor
- Check if the HDMI/VGA cable is securely connected to both the NVR and the monitor.
- Ensure the monitor is powered on and set to the correct input source.
- Try a different HDMI/VGA cable or monitor.
7.2 Cameras Not Displaying
- Verify that cameras are properly connected to the NVR's PoE ports.
- Ensure cameras are powered on (PoE provides power).
- Check network connectivity between the NVR and cameras.
- Restart the NVR and cameras.
7.3 Remote Access Issues
- Ensure the NVR is connected to the internet.
- Verify that the Reolink App/Client is updated to the latest version.
- Check your network settings and firewall configurations.
- Ensure the UID (Unique ID) of the NVR is correctly entered in the app/client.
7.4 Recording Problems
- Check the HDD status in the NVR settings to ensure it is functioning correctly and has sufficient space.
- Verify recording schedules and motion detection settings.
- Ensure cameras are properly connected and streaming video.
8. Specifications
8.1 Reolink RLN8-410 NVR
| Feature | Specification |
|---|---|
| Model Number | RLN8-410 |
| Channels | 8 Channels |
| Video Input | IP Input |
| Connectivity Technology | Ethernet, HDMI, USB |
| Compatible Devices | Reolink IP Cameras |
| Internal Storage | 2 TB HDD (pre-installed) |
| External Storage | eSATA port for up to 8TB additional HDD |
| Dimensions | Approx. 10.2 x 9.05 x 1.6 inches |
| Weight | Approx. 4.4 lbs |
8.2 Reolink RLA-RM1 NVR Mounting Bracket
| Feature | Specification |
|---|---|
| Model Number | RLA-RM1 |
| Compatibility | Reolink NVRs including RLN8-410, RLN16-410, RLN36, RLN12W |
| Mounting Options | Wall Mount, Rack Mount |
| Material | Metal (inferred) |
9. Warranty & Support
9.1 Warranty Information
Reolink products typically come with a limited warranty. Please refer to the warranty card included in your product packaging or visit the official Reolink website for the most current and detailed warranty policy specific to your region and product model.
9.2 Customer Support
For technical assistance, troubleshooting, or any product-related inquiries, please contact Reolink Customer Support through the following channels:
- Official Website: Visit reolink.com/support for FAQs, firmware downloads, and support resources.
- Email Support: Contact support via the email address provided on the official website.
- Online Community: Engage with other Reolink users and find solutions in the Reolink community forums.
