1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your OffiGo 63 Inch Reversible L Shaped Electric Standing Desk. Please read this manual thoroughly before beginning assembly or operation to ensure safe and efficient use of your new workstation. Keep this manual for future reference.
2. Setup and Assembly
Before assembly, ensure all parts are present and in good condition. Refer to the packing list provided with your desk. It is recommended to have two people for assembly due to the size and weight of the components.
2.1 Unboxing and Part Identification
Carefully unpack all components. Lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided diagrams in the assembly guide.
2.2 Reversible L-Shaped Design
Your OffiGo standing desk features a reversible L-shaped design, allowing you to configure the longer or shorter side to your left or right, depending on your room layout and preferences. This flexibility ensures optimal space utilization.
2.3 Assembly Steps
Follow the step-by-step instructions provided in the included user manual. All parts are clearly labeled to facilitate the assembly process. For visual guidance, please refer to the official assembly video below.
Video 1: L Shaped Standing Desk Assembly Video. This video provides a visual walkthrough of the assembly process for the OffiGo L-shaped standing desk.
Another helpful video demonstrating the desk's features and assembly is available:
Video 2: OffiGo Electric L Shaped Standing Desk with Drawers. This video showcases the features and provides insights into the assembly of the OffiGo electric L-shaped standing desk, including drawer installation.
Ensure all screws are tightened securely after initial assembly to guarantee stability.
3. Operating Instructions
3.1 Height Adjustment
The OffiGo Electric Standing Desk allows for smooth and quiet height adjustments to switch between sitting and standing positions. The height adjustment range is from 27.9 inches to 46.1 inches.
3.2 Digital Controller Panel
The desk is equipped with a digital controller panel for easy height control and memory presets.
- Up/Down Arrows: Press and hold to manually adjust the desk height.
- Memory Presets (1, 2, 3): Program up to three preferred sitting or standing heights for one-touch adjustment. To set a memory position, adjust the desk to your desired height, then press the 'S' (Set) button followed by the desired number (1, 2, or 3).
- 'S' (Set) Button: Used to save a memory height position.
- LED Screen: Displays the current height of the desk.
4. Maintenance
To ensure the longevity and optimal performance of your OffiGo standing desk, follow these maintenance guidelines:
- Cleaning: Wipe the desktop surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Inspection: Periodically check all screws and connections to ensure they are tight. Retighten if necessary.
- Weight Capacity: Do not exceed the maximum weight capacity of 154 lbs (70 kg) to prevent damage to the motor and frame.
- Cable Management: Ensure all cables are neatly managed and do not interfere with the desk's movement.
5. Troubleshooting
If you encounter any issues with your desk, refer to the following common problems and solutions:
| Problem | Solution |
|---|---|
| Table is uneven. | Loosen the screws and adjust the table until it is stable, then tighten the screws. |
| Wrong hole position. | Check if the panel is reversed. |
| Uneven hole position. | Rotate each screw just a few turns. When all screws are threaded, go back and tighten all remaining screws. |
| The desktop could not be lifted. | Check if overloaded; max loading: 70kg. Find after sales in time. |
| Strange sound and shaking, incorrect assembly. | Check if all of the screws are 100% tightened. |
| Only one side moves up and down. | Check whether the coupling is connected to two ports at both ends and whether the black circlip is still there. If the coupling rod can be pulled out, it means that it is not installed and not fixed. Reassemble the coupling rod, and reset the desk. |
| Uneven legs but the desk can go up and down. | Find after sales in time. Remove the hexagonal coupling rod and rotate the coupling rod to adjust the table leg manually to the initial state. |
| Memory position button not work. | Once the desk is reset and displays '71', your desk is now ready to use. |
| Error code E10. Motor doesn't work. | Find after sales in time. |
| Overwork / Duty cycle: Max 4min ON / 15min OFF | Restart it after switching off for 15 minutes for overworking. Find after sales in time. |
| Handset doesn't display, and power indicator light is not on. | Find after sales in time. |
6. Specifications
- Brand: OffiGo
- Shape: L-Shape
- Desk Design: Standing Desk
- Product Dimensions: 47.2"D x 63"W x 28.4"H
- Color: Black
- Style: Modern
- Base Material: Alloy Steel
- Top Material Type: Engineered Wood
- Finish Type: Polished
- Special Feature: Electric
- Adjustable Height Range: 27.9 to 46.1 inches
- Max Load: 154 lbs (70 kg)
- Assembly Required: Yes
7. Warranty & Support
OffiGo products are designed for quality and durability. For specific warranty information regarding your 63 Inch Reversible L Shaped Electric Standing Desk, please refer to the warranty card included in your product packaging or contact OffiGo customer support directly.
Customer Support
If you have any questions, require assistance with assembly, or need troubleshooting help, please contact OffiGo customer support. Contact details can typically be found on the product packaging, the official OffiGo website, or through your purchase platform.