EYEFEAT W07-1 Portable Carpet & Upholstery Spot Cleaner Instruction Manual

1. Introduction

Thank you for choosing the EYEFEAT W07-1 Portable Carpet & Upholstery Spot Cleaner. This manual provides essential information for the safe and effective use of your new appliance. Please read all instructions carefully before operation and retain this manual for future reference.

Figure 1: EYEFEAT W07-1 Portable Carpet & Upholstery Spot Cleaner.

2. Important Safety Instructions

When using an electrical appliance, basic precautions should always be followed, including the following:

• Read all instructions before using the appliance.
• Do not immerse the appliance in water or other liquids.
• Do not use with a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Unplug from outlet when not in use and before servicing.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without tanks in place.
• Connect to a properly grounded outlet only. See grounding instructions.

3. Package Contents

Verify that all components are present in the package:

• Main Unit with Hose
• Large Brush Tool
• Small Brush Tool
• Self-cleaning Unit
• Cleaning Solution (8.8 FL OZ)
• User Manual

Figure 2: All components included in the EYEFEAT W07-1 package.

4. Product Features

• Powerful 18KPa Suction: Equipped with an upgraded motor for strong suction to effectively remove embedded dirt, liquid spills, and pet messes.
• Dual Tank System: Features separate clean water (1.5L) and dirty water (0.8L) tanks to ensure hygienic operation and consistent cleaning performance.
• Multi-Surface Cleaning: Versatile for use on sofas, rugs, stairs, upholstery, and car interiors.
• Extended Reach: A 4.3 ft hose and 16.4 ft power cord provide ample reach for hard-to-access areas.
• Portable Design: Lightweight and compact for easy carrying and storage, with built-in storage for accessories.
• Self-Rinsing System: Integrated function to flush the hose and brush after use, maintaining cleanliness and readiness.

Figure 3: Illustration of the powerful 18KPa suction for deep cleaning.

Figure 4: The Super Large Dual Tank System keeps clean and dirty water separate.

Figure 5: Extended reach for cleaning larger areas effortlessly, including car interiors.

5. Setup & Operating Instructions

5.1 Initial Setup

1. Attach Brush Head: Select the appropriate brush head (large or small) for your cleaning task. Align the brush head with the handle and push until it clicks into place.
2. Fill Clean Water Tank: Remove the clean water tank (labeled 1.5L) from the main unit. Unscrew the cap at the bottom, fill with water (maximum 140°F / 60°C), and add the recommended amount of cleaning solution (4 oz formula to 1 gallon water). Securely close the cap and reinsert the tank into the unit.
3. Attach Hose: Connect the hose to the main unit by aligning and pushing until it clicks.
4. Plug In: Plug the power cord into a grounded electrical outlet.

Figure 6: Recommended solution ratio and tank management.

5.2 Operating the Cleaner

5. Turn On: Press the power switch located on the main unit to turn on the cleaner.
6. Spray Solution: Hold the brush tool over the stained area. Press the trigger on the handle to spray the cleaning solution onto the fabric.
7. Scrub: Gently scrub the stained area with the brush bristles to loosen dirt.
8. Suction: Release the trigger and slowly pull the brush tool over the wet area to suction up the dirty water. Repeat steps 6-8 until the stain is removed and the water being extracted is clear.

Figure 7: Three easy steps for effortless cleaning.

6. Maintenance & Cleaning

6.1 After Each Use

1. Empty Dirty Water Tank: Remove the dirty water tank (labeled 0.8L) and empty its contents. Rinse thoroughly with clean water.
2. Self-Clean Hose: Fill the clean water tank with clean water only. Attach the self-cleaning unit to the hose. Turn on the machine and press the spray trigger to flush clean water through the hose, cleaning any residue.
3. Clean Brush Tools: Detach the brush tool from the hose. Rinse the brush head under running water. The brush plate can be removed for deeper cleaning if necessary.
4. Wipe Down: Wipe the exterior of the unit with a soft, damp cloth.
5. Store: Wrap the hose and power cord around the designated storage areas on the unit. Store the brush tools in their integrated holders.

Figure 8: The compact and lightweight design allows for easy storage.

7. Troubleshooting

• Missing Accessories: Some small accessories are packed inside the clean water tank or dirty water tank to keep them secure during shipping. Please open both tanks and check inside.
• Weak Suction: Check if the dirty water tank is above the MAX line. This can reduce suction. Empty and clean the tank after each use. Ensure water is kept below the MAX line.
• Can I use cleaning solution with this machine? Yes. You can use the cleaning solution included in the package. Add it to the clean water tank and follow the mixing ratio instructions on the product label.
• Can I use it outside the U.S.? Only with a 110V–120V power supply or a proper voltage converter.

8. Specifications

9. Support

For any questions regarding setup, operation, or troubleshooting, please message us directly through Amazon. Our support team is available to assist you as soon as possible.