1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Aigostar Solar LED Floodlight. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Image: Aigostar Solar LED Floodlight units with solar panels and remote controls.
2. Safety Information
- Ensure the product is installed in a location with sufficient sunlight exposure for optimal charging.
- Do not attempt to disassemble or modify the product.
- Keep the solar panel clean to maintain charging efficiency.
- The product is rated IP65 waterproof, suitable for outdoor use in various weather conditions (rain, sleet, snow).
- Operating temperature range: -10°C to 50°C.
Image: IP65 waterproof and temperature resistance features.
3. Package Contents
Verify that all components are present in the package:
- Aigostar Solar LED Floodlight unit(s)
- Solar Panel(s)
- Remote Control(s)
- Mounting Screws and Anchors
- Instruction Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | TK09-100W |
| Power | 100W |
| Luminous Flux | 1000 LM |
| Color Temperature | 6500K (Cool White) |
| Waterproof Rating | IP65 |
| Beam Angle | 90° |
| Solar Panel Efficiency | Up to 25% conversion |
| Charging Time | 4-6 hours (full charge) |
| Lighting Duration | Up to 12 hours |
| Remote Control Distance | Up to 8 meters |
| Cable Length | 2 meters |
| Product Dimensions (Light) | L215 x W44 x H257mm |
| Solar Panel Dimensions | L300 x W205 x H17mm |
| Lifespan | 30000 hours |
5. Setup and Installation
Follow these steps for proper installation of your solar LED floodlight:
- Choose a Location: Select an outdoor location that receives direct sunlight for 4-6 hours daily to ensure optimal charging of the solar panel.
- Mount the Solar Panel: Secure the solar panel using the provided screws and anchors. The steel tube holder allows for 180° rotation to adjust the panel's angle towards the sun.
- Mount the Floodlight: Install the floodlight in the desired area. Common mounting options include wall mount, pedestal mount, or ceiling mount. Ensure the wiring is correct and align the arrows on the interface when connecting the cable.
- Connect the Cable: Connect the 2-meter cable from the solar panel to the floodlight. Ensure a secure connection.
- Initial Charge: For the first use, allow the solar panel to charge for 24 hours in direct sunlight to fully activate the battery.
Image: Solar panel with a 180-degree rotatable holder for optimal sun exposure.
Image: Product dimensions and various installation methods.
6. Operation
The Aigostar Solar LED Floodlight features automatic operation and can be controlled via the included remote control.
6.1 Automatic Operation
The floodlight is equipped with a dusk-to-dawn sensor. It will automatically turn on at night and turn off during the day to charge. Note: The remote control cannot override the light sensor to force the light off during daylight hours.
6.2 Remote Control Functions
Before first use, press the "WAKE UP" button on the remote control to activate it. Remove any insulation sheet from the battery compartment if present.
Image: Remote control layout and functions.
- ON/OFF: Press the "ON" button to turn the light on, and "OFF" to turn it off manually.
- Brightness Adjustment: Use the "+" and "-" buttons to adjust the brightness level (20%, 40%, 60%, 80%, 100%).
- AUTO Mode: Press the "AUTO" button to activate the dusk-to-dawn sensor, allowing the light to turn on and off automatically.
- Timer Settings: Select "3H", "5H", or "8H" to set the floodlight to turn off automatically after 3, 5, or 8 hours of operation, respectively.
Image: Visual representation of adjustable brightness levels.
Image: Example of timer function, showing lights turning off after set durations.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your solar LED floodlight.
- Clean the Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency.
- Check Connections: Ensure all cable connections remain secure and free from corrosion.
- Inspect for Damage: Regularly check the floodlight and solar panel for any physical damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar panel charging. Remote control not activated. Sensor obstructed. | Ensure solar panel is in direct sunlight for 4-6 hours daily. Clean the solar panel. Press "WAKE UP" on the remote. Check for obstructions blocking the light sensor. |
| Light is dim or only stays on for a short period. | Insufficient charge due to cloudy weather or poor panel placement. Battery degradation over time. | Relocate solar panel for better sun exposure. Ensure panel is clean. Battery lifespan is limited; consider replacement if performance significantly drops after several years. |
| Remote control not working. | Battery dead or insulation sheet not removed. Out of range. | Replace remote control battery or remove insulation sheet. Operate within 8 meters of the floodlight. |
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Aigostar website. Keep your purchase receipt as proof of purchase.
