SUNLEI Metal Loft Bed with Trundle (Twin Over Full, Metta White) - Instruction Manual

Introduction

Thank you for choosing the SUNLEI Metal Loft Bed with Trundle. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed. Please read all instructions carefully before assembly and retain this manual for future reference.

Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always follow assembly instructions carefully to prevent instability or collapse.
• Be cautious of pinch points when assembling and using the bed.
• The upper guardrail opening is designed for easy climbing, and the 14-inch guardrail protects your safety.
• Ensure the mattress on the upper bed is at least 5 inches below the top edge of the guardrail.
• Weight Capacity:
  Upper Twin Bed: 300 lbs
  Lower Full Bed: 400 lbs
  Trundle Twin Bed: 300 lbs

Setup & Assembly

The SUNLEI Metal Loft Bed is designed for straightforward assembly. All necessary parts are packed in one box. Assembly typically takes less than 40 minutes when following the provided instructions.

1. Unpack all components and verify against the parts list in your included assembly guide.
2. Carefully follow the step-by-step instructions provided in the separate assembly manual.
3. Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten all connections.
4. Attach the anti-toppling devices to the wall for added stability, as shown in the assembly guide.

Operating Features

• Built-In Ladders: The bed features ladders on both the left and right sides, offering flexibility in room arrangement.
• Removable Trundle Bed: The trundle bed is equipped with 4 universal wheels (2 lockable) for easy movement and can be stored neatly under the main bed when not in use.
• Space-Saving Design: The raised loft bed frame creates a versatile space underneath, suitable for storage or as a play area.
• Reinforced Support Slats: 22 metal slats provide strong support for mattresses, eliminating the need for a box spring.

Maintenance

• Regularly wipe down the metal frame with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners.
• Periodically inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten as necessary to maintain stability and safety.
• Keep the trundle bed wheels clean and free of debris to ensure smooth operation.

Troubleshooting

• Difficulty during assembly: Ensure all parts are correctly identified and oriented according to the assembly instructions. If parts appear mislabeled or ill-fitting, double-check the manual and contact customer support for assistance.
• Bed feels unstable or wobbly: Verify that all bolts and screws are fully tightened. Ensure the bed is placed on a flat, level surface. If included, confirm anti-toppling devices are properly installed.
• Squeaking noises: Check all connection points and tighten any loose fasteners. Applying a small amount of lubricant to metal-on-metal contact points can also help.

Specifications

Warranty & Support

For any questions regarding assembly, missing parts, or product issues, please contact SUNLEI customer support. Refer to your purchase documentation for specific warranty details.