Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your EROMMY 24 Inch Bathroom Vanity with Sink Combo. Please read all instructions carefully before beginning assembly and retain this manual for future reference. Proper assembly and care will ensure the longevity and optimal performance of your vanity.

Figure 1: EROMMY 24 Inch Bathroom Vanity with Sink Combo.
Important Safety Information
- Always use appropriate safety gear, such as gloves and eye protection, during assembly.
- Ensure all parts are present and undamaged before assembly. Do not proceed if any parts are missing or broken.
- Assembly should be performed on a soft, clean surface to prevent scratches.
- Do not overtighten screws, as this may damage the material.
- Keep small parts away from children to prevent choking hazards.
- For plumbing connections, it is recommended to consult a qualified plumber to ensure proper installation and prevent leaks.
- Ensure the vanity is placed on a level surface to prevent tipping.
Package Contents
Your EROMMY 24 Inch Bathroom Vanity with Sink Combo is shipped in two boxes and includes the following components:
- 1 × Bathroom Cabinet (Main Vanity Body)
- 1 × Vessel Sink (Boat-shaped glass sink)
- 1 × Faucet and Drain Assembly
- 2 × Hardware Sets (for cabinet assembly and installation)
- 1 × User Manual (this document)

Figure 2: Product Dimensions and Key Features. Note: Product is shipped in 2 packages.
Assembly and Installation Instructions
Follow these steps carefully to assemble and install your bathroom vanity.
Step 1: Prepare the Cabinet
- Unpack all components and verify against the package contents list.
- Assemble the main cabinet body according to the detailed diagrams in the included hardware set manual. Ensure all panels are securely fastened.
- Attach the strong leg supports to the base of the cabinet.
- Install the reinforced crossbar at the bottom for added stability.
- Install the DTC soft-close hinges onto the cabinet doors and attach the doors to the cabinet. Adjust hinges for proper door alignment.
- Attach the black metal handles to the cabinet doors.
- Insert the adjustable shelf into the desired position within the cabinet.

Figure 3: Detailed view of cabinet components including handles, hinges, legs, and crossbar.
Step 2: Install the Vessel Sink and Faucet
- Carefully place the boat-shaped glass vessel sink onto the top surface of the assembled cabinet. Ensure it is centered over the pre-drilled drain hole.
- Install the faucet and drain assembly according to the manufacturer's instructions provided with the plumbing hardware.
- Connect the water supply lines to the faucet and the drain pipe to the P-trap and wall drain. Ensure all connections are tight to prevent leaks. It is recommended to use plumber's tape on threaded connections.

Figure 4: Uniquely designed boat-shaped glass vessel sink.

Figure 5: Faucet and drain components.
Step 3: Final Placement
- Carefully move the assembled vanity to its final desired location in the bathroom.
- Ensure the vanity is level and stable. Adjust the leg levelers if necessary.
- Turn on the water supply and check for any leaks at all connections. Tighten connections as needed.
Operating Instructions
Your EROMMY bathroom vanity is designed for daily use in a bathroom environment. Here are some operational guidelines:
- Faucet Operation: Use the single handle faucet to control water flow and temperature. Push the handle up for water, and move left for hot water, right for cold water.
- Sink Stopper: The included sink stopper provides dual-function water retention and release. Push down to close the drain and retain water; push again to open and release water.
- Cabinet Storage: The two soft-close doors open to reveal an adjustable shelf, providing ample space for toiletries, towels, and other bathroom essentials. Adjust the shelf height as needed for your storage requirements.

Figure 6: Spacious interior storage with adjustable shelf.
Maintenance and Care
Regular maintenance will help preserve the appearance and functionality of your vanity.
- Cabinet: Wipe the engineered wood surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Dry immediately after cleaning.
- Glass Vessel Sink: Clean the glass sink with a mild soap and water solution and a soft cloth. Rinse thoroughly and dry to prevent water spots. Avoid using harsh chemicals or abrasive pads that could scratch the glass.
- Faucet and Drain: Clean the faucet and drain with a soft cloth and mild soap. Do not use abrasive cleaners, polishes, or waxes, as these can damage the finish.
- Hinges: Periodically check the soft-close hinges for proper operation and tighten any loose screws if necessary.
- Spills: Wipe up any water spills on the cabinet surfaces immediately to prevent water damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Loose plumbing connections; damaged seals. | Check and tighten all water supply and drain connections. Replace seals if damaged. If issues persist, consult a plumber. |
| Cabinet Doors Misaligned | Hinges are loose or improperly adjusted. | Adjust the screws on the DTC soft-close hinges to realign the doors. Refer to hinge adjustment instructions if needed. |
| Slow Drainage | Drain stopper or pipe is clogged. | Remove the sink stopper and clear any debris. If necessary, disassemble the P-trap to remove blockages. |
| Vanity is Unstable/Wobbly | Uneven floor; loose leg supports. | Adjust the leg levelers at the bottom of the vanity. Ensure all leg support screws are tightened. |
Product Specifications
| Brand | EROMMY |
| Model Number | PXYFHM37HT |
| Color | Walnut |
| Material | Engineered Wood (Cabinet), Glass (Sink) |
| Product Dimensions (D x W x H) | 18.1"D x 24"W x 30.3"H |
| Item Weight | 53 Pounds |
| Installation Type | Freestanding |
| Number of Doors | 2 |
| Number of Shelves | 1 (Adjustable) |
| Included Components | 1× bathroom cabinet, 1 x Vessel Sink, 1 x Faucet and Drain, 2 × Hardware Set, 1x User Manual |
Warranty Information
EROMMY products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, most EROMMY products come with a limited manufacturer's warranty covering defects in materials and workmanship. Please retain your proof of purchase. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or contact EROMMY customer support.
Customer Support
If you have any questions regarding the assembly, installation, operation, or maintenance of your EROMMY 24 Inch Bathroom Vanity with Sink Combo, or if you require replacement parts, please contact EROMMY customer support.
- Online Support: Visit the official EROMMY website for FAQs and support resources.
- Contact Information: Refer to your purchase documentation or the EROMMY website for current contact details (phone, email).
Please have your model number (PXYFHM37HT) and proof of purchase ready when contacting support.