1. Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your KENES LJ-9055A-5 Pull Out Bathroom Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Image 1.1: KENES LJ-9055A-5 Pull Out Bathroom Faucet in Polished Chrome.
2. Key Features
- Pull Down Sprayer: Equipped with a three-function sprayer head. Rotate the bottom to switch between soft bubble stream and strong spray. Slide the top button for the upper water spray gargle function.
- Corrosion-Resistant Finish: The faucet's finish is engineered for durability and tested for corrosion resistance.
- Efficient Gargle Function: The upper water jet maintains a consistent height of 5-12 cm, suitable for various water pressures, and prevents splashing. Ergonomically designed for comfortable use.
- Reliable Valve: The ceramic disc valve is tested for at least 500,000 uses, ensuring high performance with minimal drips and smooth handle operation.
- Easy DIY Installation: Features a 2-head quick connection design for straightforward installation. Includes a 6-inch deck plate and pop-up drain.
- 360° Swivel Spout: The heavy-duty spout rotates 360 degrees, offering a full range of motion for increased versatility.
- Forward-Only Handle: Single lever handle operates with 90° forward rotation, allowing installation in tighter spaces without requiring backsplash clearance.
Image 2.1: The three spray functions of the faucet head.
Image 2.2: Demonstration of the mouthwash mode for convenient oral hygiene.
Image 2.3: The 360° free pull-out sprayer with a 20-inch hose for extended reach.
3. Installation Instructions
3.1. Before You Begin
- Ensure all necessary components are present: faucet assembly, deck plate (optional), pop-up drain, and installation hardware.
- Turn off the main water supply to the bathroom.
- Clear the area under the sink for easy access.
- Review local plumbing codes to ensure compliance.
3.2. Required Tools (Not Included)
- Adjustable wrench
- Phillips screwdriver
- Plumber's putty or silicone sealant
- Flashlight
- Safety glasses
3.3. Step-by-Step Installation
- Prepare the Sink Hole: The faucet is designed for single-hole installations. If your sink has three holes, use the included 6-inch deck plate to cover the outer holes. Ensure the hole size is between 1.25 and 1.5 inches and the maximum deck thickness is 3 inches.
- Install the Faucet:
- Place the faucet body through the center hole of the sink (with or without the deck plate).
- From underneath the sink, secure the faucet using the provided washer and mounting nut. Tighten firmly but do not overtighten.
- Connect Water Supply Lines:
- Connect the hot and cold water supply lines to the corresponding inlets on the faucet.
- Connect the other ends of the supply lines to your hot and cold water shut-off valves. Ensure all connections are tight to prevent leaks.
- Install the Pop-Up Drain:
- Apply plumber's putty or silicone sealant around the flange of the pop-up drain.
- Insert the drain body into the sink drain hole.
- From underneath, secure the drain with the provided gasket and nut.
- Connect the drain tailpiece to your P-trap assembly.
- Connect Sprayer Hose: The faucet features a 2-head quick connection design for the pull-out sprayer hose. Connect the sprayer hose to the designated port on the faucet body. Ensure a secure connection.
- Test for Leaks: Once all connections are made, slowly turn on the main water supply. Check all connections for any signs of leaks. Run the faucet for a few minutes to flush out any debris.
Image 3.1: Faucet dimensions and installation requirements, including the optional deck plate and pop-up drain.
Image 3.2: Visual guide for faucet swivel, pop-up drain, and quick installation.
Video 3.1: Official product video demonstrating the features and installation process of the KENES Pull Down Bathroom Faucet.
4. Operating Instructions
4.1. Water Flow and Temperature Control
The single lever handle controls both water flow and temperature:
- Lift the handle to increase water flow.
- Push the handle down to decrease or stop water flow.
- Move the handle to the left for hot water and to the right for cold water.
- The handle features a 90° forward rotation, allowing for installation in tight spaces without needing clearance from a backsplash.
Image 4.1: Forward-only handle design for temperature and flow control.
4.2. Sprayer Functions
The pull-out sprayer head offers three distinct functions:
- Soft Bubble Stream: Ideal for gentle washing. Activate by rotating the bottom of the sprayer head.
- Strong Spray: Suitable for efficient cleaning tasks. Activate by rotating the bottom of the sprayer head.
- Upper Water Spray (Gargle Function): For convenient oral hygiene or quick rinsing. Activate by gently sliding the top button on the sprayer head. This function provides a consistent upward water jet.
Image 4.2: Sprayer head controls for switching between water modes.
Image 4.3: Benefits of the micro-bubble water mode for enhanced cleaning and skin moisturizing.
5. Maintenance
5.1. Cleaning the Faucet
- Clean the faucet regularly with a soft cloth and mild soap.
- Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Rinse thoroughly with water after cleaning and dry with a soft cloth to prevent water spots.
5.2. Cleaning the Pop-Up Drain
The included pop-up drain is designed for easy cleaning:
- To clean, simply unscrew the top cap of the drain from above the sink deck.
- Remove any accumulated hair or debris.
- Rinse the drain components and reassemble.
Image 5.1: Easy removal of the pop-up drain for cleaning.
6. Troubleshooting
If you encounter any issues with your faucet, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow |
|
|
| Leaks from Faucet Base |
|
|
| Leaks from Sprayer Hose |
|
|
| Water Temperature Issues |
|
|
If the problem persists after attempting these solutions, please contact KENES customer support for assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | KENES |
| Model Number | LJ-9055A-5 |
| Color | Chrome |
| Material | Stainless Steel |
| Finish Type | Polished |
| Mounting Type | Deck Mount |
| Number of Handles | 1 (Lever) |
| Hole Count | 1 (Compatible with 3-hole using deck plate) |
| Spout Height | 6.5 Inches |
| Spout Reach | 6.34 Inches |
| Flow Rate | 1.2 Gallons Per Minute |
| Special Features | 360 Swivel, Lead Free, Pull Down Sprayer, Three Function Sprayer |
| Included Components | Deck Plate, Drain, Installation Hardware |
8. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or visit the official KENES website. If you require assistance with installation, operation, or troubleshooting, please contact KENES customer service.
Manufacturer: KENES
Contact Information: Please refer to the contact details provided on the KENES official website or product packaging.