ICEVOKE BY607-B

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

ICEVOKE Self-Cleaning Bottom Loading Water Cooler Dispenser BY607-B Instruction Manual

Brand: ICEVOKE | Model: BY607-B

Introduction

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your ICEVOKE Self-Cleaning Bottom Loading Water Cooler Dispenser. Please read this manual thoroughly before using the appliance and retain it for future reference.

Product Features

  • Durable Construction: Crafted from high-quality ABS and stainless steel for long-lasting performance and a modern aesthetic.
  • Bottom-Loading Design: Facilitates easy replacement of 3 or 5-gallon water bottles without heavy lifting.
  • Three Temperature Settings: Provides instant access to hot (over 194°F / 5L/h), room temperature, and cold (under 50°F / 2L/h) water.
  • Low Water Reminder: Alerts users when the water bottle needs replacement, ensuring a continuous supply.
  • Child Safety Lock: Integrated on the hot water spout to prevent accidental dispensing of hot water.
  • Automatic Self-Cleaning Function: Maintains internal cleanliness for hygienic water dispensing.
  • Low Noise Operation: Designed to operate quietly, minimizing disturbance.
  • Food-Grade Materials: Ensures the safety and purity of dispensed water.
  • Overheating Protection: Enhances electrical safety during operation.
  • Simple Installation: Plug & play design requires no complex plumbing.

Setup Instructions

  1. Unpacking: Carefully remove the water cooler from its packaging. Inspect for any damage.
  2. Placement: Position the dispenser on a flat, stable surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
  3. Initial Cleaning: Before first use, it is recommended to clean the internal water paths. Refer to the 'Maintenance' section for self-cleaning instructions.
  4. Loading Water Bottle:
    • Open the bottom compartment door.
    • Remove the cap from a new 3 or 5-gallon water bottle.
    • Insert the water probe into the bottle opening. Ensure a secure fit.
    • Slide the water bottle into the bottom compartment.
    • Close the compartment door securely.
  5. Power Connection: Plug the power cord into a grounded electrical outlet.
  6. Initial Water Filling: Allow several minutes for the internal tanks to fill with water before turning on heating or cooling functions. Dispense a small amount of water from each spout (hot, room, cold) to ensure air is purged from the lines.

Operating Instructions

  1. Powering On: Locate the power switches on the back of the unit. Turn on the switches for hot and cold water as desired. Indicator lights on the front panel will illuminate.
  2. Dispensing Cold Water: Place your cup under the cold water spout. Press the cold water button/lever. Release to stop dispensing.
  3. Dispensing Room Temperature Water: Place your cup under the room temperature water spout. Press the room temperature water button/lever. Release to stop dispensing.
  4. Dispensing Hot Water (with Child Safety Lock):
    • Place your cup under the hot water spout.
    • Simultaneously press and hold the red child safety lock button located above the hot water spout.
    • While holding the safety lock, press the hot water button/lever to dispense hot water.
    • Release both buttons/levers to stop dispensing.
  5. Empty Bottle Indicator: The empty bottle indicator light on the front panel will illuminate when the water bottle in the bottom compartment is low or empty, signaling it's time for a replacement.

Maintenance

  • Self-Cleaning Function: The dispenser features an automatic self-cleaning function. Follow the specific instructions in the full product manual for activating and utilizing this feature to ensure water purity.
  • Drip Tray Cleaning: The removable drip tray should be emptied and cleaned regularly to prevent overflow and maintain hygiene. Simply slide out the tray, discard collected water, wash with mild soap and water, rinse thoroughly, and replace.
  • Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents.

Troubleshooting

  • No Water Dispensing: Check if the water bottle is properly installed and not empty. Ensure the power cord is securely plugged in and the unit is turned on.
  • Water Not Hot/Cold Enough: Verify that the hot/cold switches on the back of the unit are turned on. Allow sufficient time (up to 15-30 minutes) for the water to reach the desired temperature after initial setup or bottle change.
  • Leaking: Ensure the water bottle is correctly seated and the water probe is properly inserted. Check the drip tray for overflow.
  • Unusual Noise: Some operational noise is normal as the compressor and heating elements work. If the noise is excessive or unusual, ensure the unit is level and not touching any walls.

For further troubleshooting or issues not covered here, please contact customer support.

Specifications

FeatureDetail
ColorBlack
MaterialAcrylonitrile Butadiene Styrene (ABS), Stainless Steel
Capacity3 or 5 Gallons (compatible)
Product Dimensions14.2"D x 12.2"W x 40.7"H
Installation TypeFreestanding
Access LocationBottom
Item Weight35 pounds
Item Model NumberBY607-B

Warranty and Support

The ICEVOKE water cooler dispenser is backed by a 1-year warranty. For any questions, technical assistance, or warranty claims, please contact our after-sale service and technical team. They are available to respond to your inquiries within hours.

Please refer to your purchase documentation for specific contact details.

Product Images

ICEVOKE Self-Cleaning Bottom Loading Water Cooler Dispenser, front view with bottom door open showing water bottle.
Figure 1: Front view of the ICEVOKE water cooler dispenser with the bottom compartment open, revealing the water bottle.
Diagram showing the dimensions of the ICEVOKE water cooler dispenser, indicating it fits standard 3-5 gallon bottles and is ETL certified.
Figure 2: Product dimensions and ETL certification details.
Image illustrating the three temperature settings (hot, room, cold) available on the ICEVOKE water cooler, with corresponding on/off switches.
Figure 3: Overview of the 3-temperature dispensing feature with control switches.
Close-up views of the ICEVOKE water cooler highlighting bottom loading, removable drip tray, and child safety lock features.
Figure 4: Detailed view of bottom loading, removable drip tray, and child safety lock.
Diagram showing the UV light cleaning technology inside the ICEVOKE water cooler, designed to reduce contaminants.
Figure 5: Illustration of the UV-infused cleaning technology.
Summary of key features of the ICEVOKE water cooler: bottom loading, low noise, food-grade materials, overheating protection, simple installation.
Figure 6: Summary of key product benefits and features.
Images showing the ICEVOKE water cooler in various settings: kitchen, gym, office, demonstrating its versatility.
Figure 7: Examples of the water cooler in different environments (kitchen, gym, office).

Product Videos

Video 1: This video provides a general overview of the ICEVOKE water cooler dispenser, showcasing its design and basic functions.

Video 2: This video demonstrates the setup and operation of the ICEVOKE BY607 water cooler, including bottle loading and dispensing.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.