ICEVOKE BY605-B Self-Cleaning Bottom Loading Water Cooler Instruction Manual

Introduction

Thank you for choosing the ICEVOKE BY605-B Self-Cleaning Bottom Loading Water Cooler. This appliance is designed to provide convenient access to hot, cold, and room temperature water. Crafted from high-quality ABS and stainless steel, it offers durability and a modern aesthetic. Please read this manual thoroughly before operation to ensure safe and efficient use.

Image: Overview of the ICEVOKE Bottom Loading Water Dispenser highlighting its durable stainless steel, easy operation, 3-5 gallon jug loading, low noise, empty bottle alarm, and ETL certification.

Safety Information

• Always ensure the appliance is placed on a flat, stable surface.
• Keep the cooler at least 8 inches from walls to allow proper airflow.
• Do not plug in the unit until the water bottle is correctly installed and the internal tanks are filled.
• Utilize the child safety lock on the hot water spout to prevent accidental burns.
• Only use 3 or 5-gallon water bottles with this dispenser.
• Regularly clean the drip tray and perform the self-cleaning function.

Setup

1. Unpacking and Placement

Carefully remove the water cooler from its packaging. Choose a flat, shaded location near a grounded wall outlet. Ensure there is at least 8 inches of space between the cooler's back and the wall for adequate ventilation.

Image: Overview of the ICEVOKE water cooler's dimensions and sleek design, suitable for various home or office environments.

2. Installing the Drip Tray

Locate the removable drip tray and grid. Slide them into the designated slot below the dispensing spouts. This tray collects any spills and is easy to remove for cleaning.

Image: Detailed view of the water cooler's features, including the bottom-loading compartment, the easily removable drip tray, and the child safety lock on the hot water dispenser.

3. Loading the Water Bottle

1. Open the bottom compartment door.
2. Remove the plastic seal from the top of your 3 or 5-gallon water bottle. Clean the bottle's neck and cap area with a damp cloth.
3. Insert the water probe (straw) into the bottle opening, ensuring it is securely in place.
4. Slide the water bottle into the bottom compartment.
5. Close the compartment door.
6. Plug the cooler into a grounded wall outlet. Allow approximately 5 minutes for the internal water tanks to fill.

Operating Instructions

1. Temperature Settings

The ICEVOKE BY605-B offers three temperature options: hot, room temperature, and cold water. These are dispensed via separate spouts on the front of the unit.

• Hot Water: Press the red button for hot water (over 194°F, 5L/h).
• Room Temperature Water: Press the blue button for room temperature water.
• Cold Water: Press the snowflake button for cold water (under 50°F, 2L/h).

Image: The control panel of the water cooler, clearly indicating the three temperature settings: hot (red button), room temperature (yellow button), and cold (blue button).

2. Child Safety Lock

The hot water spout is equipped with a child safety lock. To dispense hot water, you must first slide the safety button located above the spout, then press the hot water button. This two-step process prevents accidental hot water dispensing.

Image: A close-up of the hot water dispenser button, showing the child safety lock mechanism that requires a slide and press action to dispense hot water.

3. Low Water Reminder

The dispenser features a low water reminder that illuminates when the water bottle in the bottom compartment is nearly empty, signaling it's time for a replacement.

Maintenance

1. Automatic Self-Cleaning Function

The ICEVOKE BY605-B includes an automatic self-cleaning function to maintain hygiene and ensure clean, healthy water. Refer to the specific instructions in your quick start guide for activating this feature.

Image: The water cooler highlighting its UV-infused cleaning technology, which helps reduce harmful contaminants and minimizes maintenance.

2. Drip Tray Cleaning

The drip tray should be regularly emptied and cleaned to prevent water overflow and maintain cleanliness. Simply slide out the tray, empty any collected water, wash with mild soap and water, rinse thoroughly, and reinsert.

Troubleshooting

• No Water Dispensing: Check if the water bottle is empty or if the probe is correctly inserted. Ensure the unit is plugged in and the bottom compartment door is fully closed.
• Water Not Hot/Cold Enough: Verify that the hot and cold switches on the back of the unit are turned ON. Allow sufficient time (approx. 15-20 minutes) for the water to reach the desired temperature after initial setup or bottle change.
• Unusual Noise: Some operational noise is normal as the unit heats or cools water. If the noise is excessive or persistent, ensure the unit is on a level surface and has proper ventilation.
• Leaking: Check the water bottle for cracks or damage. Ensure the water probe is securely seated in the bottle opening.

Specifications

Image: Visual representation of the water cooler's dimensions and its ETL certification, indicating compliance with safety standards.

Warranty and Support

The ICEVOKE BY605-B Water Cooler is backed by a 1-year warranty. For any questions, technical assistance, or warranty claims, please contact our after-sale service and technical team. We are committed to responding to your inquiries within hours.

For further assistance, please visit our official website or refer to the contact information provided in your product packaging.