1. Important Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Exercise caution around sharp edges during assembly.
- Do not load the bed frame with more than 150 pounds.
- Follow all assembly instructions precisely to ensure safe setup and structural integrity.
- Ensure all connections are securely tightened before use. Periodically check and re-tighten fasteners.
2. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Sub-item 1: WF316939AAD (83.27 x 17.32 x 5.12 inches, 62.83 lbs)
- Sub-item 2: WF316940AAD (51.18 x 25.98 x 5.71 inches, 57.21 lbs)
- All necessary parts and tools for assembly are included.
3. Assembly Instructions
The Merax King Size Bed Frame is designed for straightforward assembly. A clear instruction manual is included in the package. Please follow the step-by-step guide provided with your product for detailed assembly procedures.
This bed frame features sturdy wooden slats, eliminating the need for a box spring. Your mattress can be placed directly onto the slats.
Image: The Merax King Size Bed Frame with its wooden slats visible, ready for mattress placement. Note the detailed paneling on the headboard and footboard.
Image: An angled view of the Merax King Size Bed Frame, highlighting the robust wooden slat support system designed to hold your mattress without a box spring.
4. Usage Instructions
Once assembled, place your King size mattress directly onto the wooden slats. The frame is designed to provide stable support without the need for an additional box spring. Ensure the mattress is centered and evenly distributed on the frame.
Image: A fully assembled Merax King Size Bed Frame in a bedroom, showcasing its traditional design and how a mattress fits directly onto the frame.
5. Maintenance
To maintain the appearance and longevity of your Merax bed frame, follow these guidelines:
- Wipe clean with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to prevent wobbling or structural instability.
- Avoid exposing the bed frame to excessive moisture or direct sunlight for prolonged periods, as this may cause damage to the wood finish.
6. Troubleshooting
If you encounter any issues with your bed frame, consider the following:
- Wobbling or Instability: Ensure all bolts and screws are fully tightened. Check that the frame is on a level surface.
- Squeaking Noises: Re-tighten all fasteners. If squeaking persists, apply a small amount of lubricant (e.g., paraffin wax) to the joints where wood meets wood or wood meets metal.
- Missing Parts: Refer to the 'Package Contents' section. If parts are missing upon delivery, contact Merax customer support.
7. Specifications
| Size | King |
| Product Dimensions | 79.1"L x 80.6"W x 52.8"H |
| Special Feature | No Box Spring Needed |
| Color | White |
| Finish Type | Pinewood |
| Included Components | 1 x Bed Frame |
| Compatible With Mattress Size | King |
| Brand | Merax |
| Furniture Finish | White |
| Assembly Required | Yes |
| Material | Engineered Wood, Pine Wood |
| Style | Traditional |
| Item Weight | 120 pounds |
Image: Detailed dimension diagram for the King size bed frame, illustrating overall length, width, and height, as well as internal measurements for mattress fit.
8. Warranty and Support
For information regarding product warranty, returns, or customer support, please refer to your purchase documentation or contact the retailer directly. You may also visit the official Merax store for additional product information and support resources.
Merax Store: Visit the Merax Store on Amazon
