1. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions before using the appliance.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electrical hazards, do not immerse cord, plugs, or the appliance base in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Extreme caution must be used when moving an appliance containing hot liquids.

2. Product Overview

The Dreo DR-KMF001 Milk Frother is designed to create various milk foams and warm milk for your beverages. It features multiple settings for different milk types and foam consistencies.

Figure 2.1: Front view of the Dreo DR-KMF001 Milk Frother. The image displays the main unit with its sleek black and silver design, featuring a control panel on the front.

2.1 Components

• Dreo Milk Frother (DR-KMF001)
• Quick Start Guide
• User Manual
• Impeller Tip (for frothing)
• Micro-level Screen
• Heating Coil (internal)

Figure 2.2: Diagram showing the internal components of the frother, including the impeller tip, micro-level screen, and heating coil, which contribute to microfoam creation.

3. Setup

3.1 Unpacking

Carefully remove all components from the packaging. Retain packaging for future storage or transport.

3.2 Initial Cleaning

Before first use, wash the stainless steel jug and lid with warm soapy water. Rinse thoroughly and dry. The jug is dishwasher safe. Wipe the exterior of the main unit with a damp cloth.

3.3 Placement

Place the frother on a stable, flat, heat-resistant surface away from water sources and heat. Ensure adequate ventilation around the unit.

4. Operating Instructions

4.1 Adding Milk

Pour milk into the stainless steel jug. Observe the internal capacity scales for different foam types and milk volumes. The frother has a maximum capacity of 27oz (800ml).

Figure 4.1: Image demonstrating the process of pouring milk into the frother's jug. The frother supports various milk types including whole, half-and-half, almond, coconut, soy, and oat milk.

4.2 Selecting a Program

The frother offers multiple programs for different milk and foam preferences. Use the control panel to select your desired setting.

• Foam Types: Hot Cappuccino, Hot Latte, Hot Flat-White, Cold Thick Foam, Hot Thick Foam.
• Milk Types: Whole, Half-and-Half, Almond, Coconut, Soy, Oat milk.
• Stir Function: For powdered drinks.

Figure 4.2: The control panel of the Dreo Milk Frother highlighting various foam options such as Hot Cappuccino, Hot Latte, Hot Flat-White, Cold Thick Foam, and Hot Thick Foam.

4.3 Temperature Control

The frother automatically heats milk to an optimal temperature range of 140°F-158°F for rich flavor. Some settings may allow for customizable temperature adjustments.

Figure 4.3: This image illustrates key features: the food-grade stainless steel body, dishwasher-safe components, a countdown timer on the LED display, and the ability to warm up milk to a customizable temperature.

4.4 Starting and Stopping

After selecting your desired program, press the start button. The LED display will show a countdown timer. The frother will automatically stop when the program is complete. To stop manually, press the button again.

5. Maintenance

5.1 Cleaning

Regular cleaning ensures optimal performance and longevity of your frother.

• Jug and Lid: The stainless steel jug and lid are dishwasher safe. Alternatively, wash them with warm soapy water and a non-abrasive sponge. Rinse thoroughly.
• Impeller Tip: Remove the impeller tip from the jug and clean it separately.
• Main Unit: Wipe the exterior of the main unit with a soft, damp cloth. Do not immerse the main unit in water or any other liquid.
• Anti-Scorching Feature: The frother is designed with an anti-scorch function to prevent milk from burning onto the surface, making cleaning easier.

5.2 Storage

Ensure the frother is clean and dry before storing. Store in a cool, dry place.

6. Troubleshooting

7. Specifications

8. Warranty and Support

Dreo is committed to providing quality products and customer service. If you encounter any issues or have questions regarding your Dreo Milk Frother, please contact our support team.

• Email Support: support@dreo.com
• Our team guarantees a personalized response within 24 hours to resolve your problem.
• Customer service follow-up within 72 hours to confirm your satisfaction.

For the most up-to-date warranty information, please refer to the warranty card included with your product or visit the official Dreo website.